Cleaning Up The Engine Bay Harness On 280Z

[@MindDezign]

I have been checking for an up date for a bit. Today I didn't look you were at the top of my feed! I can tell, " it's another year just by how many jackets you have on the layered look is survival mode. I moved from New England to Florida over ten yrs now. I'm comfortable yr round. Ride my 84 GPz cafe racer year round. My resto mod Z almost finished. And it's another year Brothers! Happy New Year ! Christmas day I ordered my LSD for my 280. Final piece of stage one. build. Later I'm planning a L28 turbo with all the protunerz, intake and exhaust, stand alone the. Drill. I'm looking forward to it running and driving again !

[@Redline280zChannel]

Many people are trying out the protunerz stuff. Turbo should be fun 👍

[@MindDezign]

@@Redline280zChannel yep it's the rage. Well give the credit they are producing parts themselves ,Godzilla racing is coming up to, this is very cool for the Z. My engine I built is new for my stage one,upped compression, street ported head, I did, headers, the Drill. 5sp, 3:90 with LSD, Konig 15x7 with 50 series continental extreme contact sports ( yep in Florida why not) lighted the chassis side by side with my 240 Z chassis '73. Cut the door skins off to get the side impact guard rails out saved a chunk of weight. I fitted a original style 5 piece G- nose. Put flat bottom aero under entire bottom of car with louvers for heat flow. Big Toyota vented front ,big 2010 mustang vented rear brakes yep with hand brake ,parking brake.Wilwood 1" master. 2 racing seats. Fiber glass skinning the interior plastics. For a smidgen lighter. Skillard floor boards dimple die. Stock 240z back dated wheel in my 280. Also back dated Dash ,popped off a fiber glass skin from my 240 Z , OG Dash ! Nice and light. Back dated to 240 tail lights and front turn signal lights. That's it for stage one including a flat rear floor and a new 57 Chevy gas tank 16 gallon fits perfect.Ot on Eibach's Sports. And by the time I register it will be on koni yellows. No racing ,no drifting, just to keep a permanent Joker Zmile on my face.

[@anthonyceretti5333]

Great work guys.

[@Sickstringfarm]

Looks great guys! That protunerz intake is awesome

[@skilled1140]

You buys are brave working in this cold

[@Redline280zChannel]

Yeah the shop could use some insulation at the very least

[@anthonyceretti5333]

Where did you guys get the throttle cable from? I am finishing my pro tunerz intake install right now and the 240sx one I got isn’t working

[@blackzed8041]

I've been wanting to do something similar for the engine harness on my 280Z. It always frustrated me how everything comes across from near the left shock tower. Where did you get the harness wrap from? Looks so much better than the cheap plastic conduit.

[@Redline280zChannel]

I got the wiring wrap from painless performance

[@MindDezign]

The wiring on a Z is sitting in the car looking out the windshield.All EFI wiring is on the Driver side kick panel, thru the driver side firewall and up and over the intake. All the wiring for lights and everything else is on the right hand passenger side and up the dash. Thru the passanger side fire wall ,on the passanger kick panel and back to tail lights, fuel pump and gauge thru the rear passenger quarter panel.

[@JefrisDela]

Where did you get the spark plug wire bracket?

[@Redline280zChannel]

instagram.com/lonelydrivercompany?

[@alexdowell6046]

u guys run 280zx distributor ?

[@Redline280zChannel]

Using a 123 ignition distributor

[@ricram785]

Link to the throttle body cable you guys used ?

[@Redline280zChannel]

www.thezstore.com/page/TZS/PROD/10-1862

[@austinrussell5577]

Where did you get your side mirrors from?

[@Redline280zChannel]

It was from zcardepot

[@austinrussell5577]

@@Redline280zChannel Thank you