i machined a perfect thread by seeing your vedeo. thank you sir
@kesjinc.28879 жыл бұрын
This is good.. I like how you always refer to the G-code.
@Seck222 жыл бұрын
Still relevant really learnt how to speed up this process, thanks
@nathanielgarcia67963 жыл бұрын
Thanks for the through explanation on every code
@RITESHDESWALTUTORIALS5 жыл бұрын
awesome sir you cleared how to selet the thread dimension very well keet it up sir
@TomStikkelman5 жыл бұрын
Thanks for that feedback Ritesh. I appreciate it a lot. Tom
@VargasEric1008 жыл бұрын
Very good balance between explaining the necessary information and too much of it. Great work, keep up plz!
@TomStikkelman8 жыл бұрын
Thank you for that feedback and thanks for watching my channel. Tom.
@andresportillo8654 жыл бұрын
Best teacher for me
@HungTran-ux7tk7 жыл бұрын
the best detail we need to know
@honeycourt17052 жыл бұрын
Thanks Tom, Your videos really helpful and understand very clearly. Can you videos about the Internal Metric videos would be appreciated.
@tuner4539 жыл бұрын
Great video sir!!!!! thanks!!!!
@TomStikkelman9 жыл бұрын
derek chan Thanks.
@Shilohfan692 ай бұрын
U r the best...
@shaktikumarbadtya69617 жыл бұрын
Thank You sir, Can you upload how to make threading model in master cam X5
@amiryasin26898 жыл бұрын
Nice information
@Migueldeservantes8 жыл бұрын
Hey a very humble request, I have manufactured my one CNC machine, More specifically a lathe machine, and was wondering if there's a way that you would share the procedure to install the Mach 3 plug ins, Perhaps I can install it in one of the oldest laptop at college so I don't have to spend literally hours weeding out the program in order to make it compatible with my humble Mach 3 CNC Lathe??
@mohamedalamine72758 жыл бұрын
Great...thnx
@alializadeh81952 жыл бұрын
Thanx
@chilamalasubbucnc Жыл бұрын
Sir please make one video how to create face thread in master cam x5
@tomyjimenez6 жыл бұрын
greetings!! great video, How do you draw the 1/4 -20 bolt ? that would be great if you can make a video...
@jerojr75423 жыл бұрын
I have a fanuc series Oi-TC and I can’t get the CSS to work I’m using G97, G50 and G96 and is not taking it is there a parameter setting? Any help will be greatly appreciated
@MikuButterflyGames9 жыл бұрын
Tom...I'm getting my X8 mill. Certification...I would like to know do you have an X8 lathe program...Russ S
@TomStikkelman9 жыл бұрын
Miku Butterfly Games1313 What are you looking for specifically in the lathe program?
@vinaygaur99586 жыл бұрын
hi Tom can u make any video for acme thread cutting
@aniketgaikwad66136 жыл бұрын
what will happen if we give negative value of thread angle
@jimwilliamson99298 жыл бұрын
I have watched a lot of your videos. You are brilliant at explaining programming/mastercam clearly. If you don't teach fulltime, you should..
@TimmithyZERO5 жыл бұрын
How do you make a left hand thread in mastercam? Tia!
@malikmohsinawan26448 жыл бұрын
3/8 19 Bspt how much OD Dia? and how to can calculation this parameter.Plz my help any person
@gilson63962 жыл бұрын
Sir can you please help me how to program api taper thread in mastercam X5
@173roberto7 жыл бұрын
Your Mastercam posts G76 P and Q without no decimal point. Do you modify the post to do that?
@TomStikkelman7 жыл бұрын
Ro Cuevas Yes you would. Thanks
@donkichot9116 жыл бұрын
Hello. Enybody known how to make a program with mastercam for thread half straight and half taper. For example first 2 inches straight than next 3 inches taper minus 1 degree . Using G32. Thank you
@tuner4539 жыл бұрын
would you please make video ID threading and ID groove of Mastercam sir.
@TomStikkelman9 жыл бұрын
derek chan I will do it soon. Thanks for watching Derek.
@patelram96156 жыл бұрын
Can u give me link to download mastercam latest version???
@tamtrinh71265 ай бұрын
Angle face draw please
@gerardoc72138 жыл бұрын
how can i get this software. thanks
@TomStikkelman8 жыл бұрын
+GERARDO c Go to Mastercam.com and it will guide you to a reseller depending on what state you are in.Thanks. TS