✅CNC Q2 is back!! (Lorna and Terminator editions) 📣 Machine Review 📣

[@ArtSomething]

✅✅Let me know what you think about the CNC Q2, have you used it? DO you love it? Hate it? wish things where different about it? Thanks for watching everyone I appreciate the support.

[@olegbarth928]

The cams. 😅😇. 👎👎👎👎 I love the q2, but if you put a mast tour pro cam on it... 😍😍😍

[@ArtSomething]

@@olegbarth928 that’s some good info to know. Thank you for sharing that with myself and everyone else who may be wondering about tha cams. 👍🤘

[@thepenleys]

How about you send it to me and I'll tell you what I think.....lol. David here again.... just wanted to let you know you still my favorite tattoo channel. You the man. 🇺🇸

[@HipHopLiveSpot]

Does it have alot give ?

[@B1GSL1M]

I bought the Q2 after your 1st vid and still use it today. love it, perfect tool for non-pro's like me

[@ArtSomething]

That’s awesome to hear Slim really glad your still loving it man as I’ve enjoyed using it again myself. 🤘🙏

[@brian1291]

if you're an artist, you'll be able to utilize any tool in your hand.....

[@hot1nk]

I was literally JUST looking at these machines!! Thanks for the review!!

[@AndrueSOCAL]

Yes I am so interested in this machine I hope I don’t regret it I see the CNC Q2 short for 60$

[@froggylake]

Thanks for the review as always, can't wait till the live.

[@ArtSomething]

Thanks Jason appreciate the support on the video and I’m looking forward to the live as well!🤘🙏

[@Tattoos_by_drew]

I don’t know if maybe I got a bad one or something but my cnc q2 has a lot of problem fitting most cartridges like it’s super tight and hard to get in and out.

[@davidgregory1229]

I’ve had the Q2 for about a year now i did change the stroke to a 4mm and I absolutely love it now that being said what is the difference from the Q2 and those is it just the color

[@ArtSomething]

Glad to hear your enjoying the Q2 with the longer stroke. Yeah im pretty sure its the same machine done in different colors. So if you already have a Q2 there wouldnt really be much need for this one. And if people are in the market for a Q2 you would be just a as well off getting the standard black one, unless you really like the colored versions. For me its just nice to have a Q2 around again, I forgot how much I enjoyed that machine.

[@jtthelightskin]

the beard is giving me my life! wish i could grow one as full haha. great review & we stan cnc i still want one lol

[@ArtSomething]

Thank you so much man and this beard is more of a pain in the butt than anything lol! And yeah, the CNC machines a pretty decent machines.

[@CxPxRx_]

I want the Q2 so bad!! It just seems like a solid machine. Hopefully One day 😅 Thanks for the video Dave!!

[@ArtSomething]

Its definitely a SOLID machine for sure. And thank you for the support Christopher much appreciated!🤘🙏

[@erikjon8853]

I bought after watching the first video. I still use it. It’s a solid machine for the price

[@HipHopLiveSpot]

Do it have any give?

[@GNCARLO_]

Hey, is the Loma and Terminator better than the Faulhaber? I've seen videos where Faulhaber has problems with cartridges not fitting in and ripping some cartriges apart after removing them!

[@jsamuelson041]

Man they both look good. That terminator sure is pretty tho

[@ArtSomething]

Yeah they both do look awesome and im glad to have one again as I really did forget how I loved this machine. Thanks for the support Samuel!🤘🙏

[@jsamuelson041]

@@ArtSomething absolutely brother. In, out, retired, it's what we do. Military or not , I absolutely love your ability to train with calmness and still have some humility even tho your work is off the charts

[@ArtSomething]

@@jsamuelson041 thank you SO much for the kind words Samuel I truly appreciate that🙏🤘 And thank you for your service as well brother 🤘

[@Bow_Babes]

I think after watching your reviews I’m definitely gonna go with a CNC

[@ronniecox8633]

hey brother what power supply are you running in the video... it looks like a critical bur got budget sake I was looking into the similar shaped ambition power supply.... recently using Hawkins and rockets but love the she of the critical and the ambition is similarly shaped. thanks KS for your help,👍✌️

[@antrocks1287]

I am still enjoying my cncq2

[@AndrueSOCAL]

And do you notice a difference in the cams they used to come with and the new one

[@olegbarth928]

Thank you for the nice video. We all like the q2. But what's the point to pay double the price, instead of getting the old one. Only for the collour?

[@ArtSomething]

It is an extra 40 dollars for the colored versions. Not really sure the color version is really necessary but I think it’s cool that they loved the Q2 enough to give it some options.

[@Kayla-enough]

ahh.... I missed the rest now rewatching 🤘

[@ArtSomething]

Thanks for the support Kayla always appreciate it!!🤘🙏

[@jtthelightskin]

lmao broooo i love the greeen & how smallll it is hahaha you doin one of those xmas giveaways lol i still haven’t be able to get a new pen :( happy holidays to you & yours btw

[@rickbailes1241]

What is the difference in the old q2 the paint job is that what you get for 50 bucks

[@ArtSomething]

Honestly I don’t think there was a difference really. Maybe just the colors, prolly best to just get the black one unless you want it in a green or silver color.

[@Kayla-enough]

I have one of the Q2 and it's very nice but I seem to like a slimmer machine personally. I just feel like I have more control with one that is slimmer. 🤷‍♀️ I do use it here and there but I find myself going for one that is slim or I just use less griptape because it is a smoothe hitting machine

[@ArtSomething]

That makes a lot of sense also as it is a bit wider of a machine and not everyone likes the same stuff thats for sure. Did you end up finding something that fit you better?

[@Kayla-enough]

I have 3 favorites I have like 30 different machines and most are still in the boxes and havent had a chance to use all of them yet sadly but I do have 3 that have been my go to so far one is a CNC black and orange idr what addition but its CNC. I have a RHEIN that I like and I have a few BEVEACE brands that I have used and one of them is lovely. Also a MAST so I guess u could say technically I have 4 go to machines that I use more than others. Just depends on what I'm actually doing and sometimes I'll set several others up and try and get a feel for them but I always end up using at least 2 of my go to ones

[@Kayla-enough]

I have liked the CNC p5 cannibal flower one of my favorites and p4

[@stevie-green]

Great review dave , I did run a Q1 for a while it's was OK done what it had too

[@ArtSomething]

Never tried the Q1, good to know tho. 👍🤘

[@vapestar3705]

I want to make this very clear....this is a 2607 faulhaber motor but it is not the same as the bishop shader.the winding is different so I'd voltage.just so everyone knows.all three of my q2 s don't work...sitting non working in my box.my shader is still kicking and rip roaring ready to go.no hate just sayin

[@Dewey_Boondye420]

its the same motor just wound differently.. so i guess theoretically a bishop shader running at 7volts is a q2 running at 9 volts.. only difference is the q2 will likely break faster cause the higher volts. it will perform the same though.. same torque and everything.. the bishop fantom 4.2mm stroke cams actually fit in the q2 giving you a $200 bishop want essentially.. which is a godsend for those of us starving artists out here. #brokeboii

[@vapestar3705]

@@Dewey_Boondye420 dude how do u figure its the same motor?it's not the same motor at all.and even if what your saying goes down in a actual shop that machine wouldn't last two days.running a machine at 9 to 10 volts tattoo after tattoo after tattoo it won't last.i personally know this from experience.i can tattoo with my bishop wand shader and tattoo with a cnc q2 and there is a massive diffrance.if you want a budget machine that's quality go with bronc wireless v7,bronc v7,ambition soldier 4.2,xnet flux max,ambition torque comes with a 3.5 a 4.5 and a 5mm cam for 80 bucks and it will tattoo laps around the q2....trust me I own 27 tattoo machies and about 10 coil machies...that's how many maxhies it took me until i found my bishop liner packer and shader.until u gwt the cash I'd grab one of those machines way way before a cnc...I own the cw2 as well and it sits...so dose my p6 with adjustable stroke....if I was gonna use a budget machine I'd grab my xnet flux with the ambition 4.6mm cam I out on it or I'd grab my ambition blade...or if I was gonna go super super budget I'd grab the arena falcon...it's a 4mm stroke comes with 2 batteries and it's less then the q2.just sayin man there is better machines out there for the money of your looking for budget cause the motors aren't the same nor will the regular 2607 last you in a shop setting or even at home setting it's still more going to last ya if you tattoo alot like I did when I did my apprenticeship.

[@vapestar3705]

@@Dewey_Boondye420 dude how do u figure its the same motor?it's not the same motor at all.and even if what your saying goes down in a actual shop that machine wouldn't last two days.running a machine at 9 to 10 volts tattoo after tattoo after tattoo it won't last.i personally know this from experience.i can tattoo with my bishop wand shader and tattoo with a cnc q2 and there is a massive diffrance.if you want a budget machine that's quality go with bronc wireless v7,bronc v7,ambition soldier 4.2,xnet flux max,ambition torque comes with a 3.5 a 4.5 and a 5mm cam for 80 bucks and it will tattoo laps around the q2....trust me I own 27 tattoo machies and about 10 coil machies...that's how many maxhies it took me until i found my bishop liner packer and shader.until u gwt the cash I'd grab one of those machines way way before a cnc...I own the cw2 as well and it sits...so dose my p6 with adjustable stroke....if I was gonna use a budget machine I'd grab my xnet flux with the ambition 4.6mm cam I out on it or I'd grab my ambition blade...or if I was gonna go super super budget I'd grab the arena falcon...it's a 4mm stroke comes with 2 batteries and it's less then the q2.just sayin man there is better machines out there for the money of your looking for budget cause the motors aren't the same nor will the regular 2607 last you in a shop setting or even at home setting it's still more going to last ya if you tattoo alot like I did when I did my apprenticeship.

[@dennyurie4038]

I am a pro and cnc x we is my favorite tattoo machine I have the real flux the real Bishop wand packer the Cheyenne pen and the Cnc X We is by far my favorite tattoo machine out at the moment. Love it it lines amazing shades amazing cooler packs amazing Cnc makes amazing tattoo machines with real German motors can't get better then that.. bronc makes good tattoo machines as well with Swiss motors..

[@bdee1084]

Did they ever change the sleeve to fit all cartridges.

[@subwooferroads]

Does it still have the same crappy cams ?

[@ArtSomething]

I don’t know I would assume it probably does I never had any issues with the cams so I can’t really speak for them.

[@subwooferroads]

@@ArtSomething by the look of the pictures on there website they have changed the cam and the plunger bar could you confirm this , or is it the same as your last model

[@subwooferroads]

Hi has the cam been changed ?

[@AndrueSOCAL]

Hey bro sorry I’ve been commenting a lot but do you still recommend this or the dragon hawk mast tour pro is 70$ also

[@Gonzito3]

Can you tell me what cartridges are compatible with the CNC Q2

[@henrymartinez9802]

Any machine u recommend for line and packing there its not a wand budge friendly looking for like a 4mm stroke

[@flaviotattooartist9276]

Very good your video bro, I have a bishop wand packer do you think they are similar? Where can I find 4mm and 5mm cam strokes? Thank you

[@rickbailes1241]

The q2 is 118 on Amazon they are asking 250 for a paint job. Come on CNC

[@subwooferroads]

Every review you gota show the motor and the cam man

[@ArtSomething]

Great point Jon I think I will try to make sure I do that whenever possible.

[@AndrueSOCAL]

My new cnc q2 has a plastic housing

[@sourpuss897]

I just got 2 cnc q2’s what do you use to oil them?

[@Swampdawgg69]

I ordered mine with a battery and police carts and they only sent the battery

[@ArtSomething]

Dang Brett I’m really sorry to hear that . Not sure if this is the same for you as it was for me but when I ordered needles, I only received one box and was quite frustrated the next day before I could send an email asking what happened to the rest of my order the rest of my order showed up that next day. With that said, they didn’t let me know it was coming into orders, so hopefully your other half of your order is on its way. But if not, make sure you reach out to them send them an email or something.

[@robertodevera5756]

I bought Q2 because of your vids... And now Im not using it..its not that strong.. maybe for soft shading and black and gray.. marketing 🙄