Windows Server 2016 - Install Hyper-V Server, Virtual Switch, VMs (How to Step by Step Tutorial)

[@hobsonbeeman7529]

One word of advice!!….make sure that when you setup the virtual switch, you get everything right the first time, including the network adapters for the VM. If you have dual NICs, allocate only one them to the virtual switch and the other to the VM host physical server. There are settings that will allow to change certain parameters in the Hyper-V settings and in the individual VM settings. These are for the most part ok to change. If you try change settings from the network adapter settings, you’re headed to destination F’d. Do not try to remove the default created Hyper-V virtual switch, do not disable the physical network adapter. Do not try and remove the Hyper-V role!….all of the actions will lead you to destination F’d and easiest fix is to just reinstall, or at least that was my experience. I was trying to swap VM switch to the other NIC and it all just went south. So…make sure during the initial setup you get it right the first time and don’t try and change anything outside of the VM setup options. ALSO, during the course of setting up the VM Host server, make sure you back it up along the way so you can recover to the various stages of configurations.

[@afridimohamed7492]

When I turn the Hyper-V role and restart I get a BSOD which says Inaccessible boot device. What can be the issue?

[@garytripodi3758]

Great vid, was going to test-bed this but now I dont have to. I'll stick to ESXi, Seems HyperV consumes a CPU for the host and an additional license for the host. ESXi uses next to nothing from server resources.

[@mohammedsulemankhan3303]

I have tried the same but on my Vswitch adapter it is showing unidentified network also it is not taking IP from DHCP, any idea on this ?

[@mamunurrashid2964]

amazing one man. really helped me understand about the Hyper-v

[@ayaanmariaofficial]

Hi, i would like to know, can we install windows server 2016 on Gigabyte b760m D2H Motherboard? i tried installing but missing lots of drivers, if you suggest me that will be great thank you

[@irangauduwarage5144]

I'm Getting an error when I'm creating a network connection in Hyper - V. I'm using windows 11. can you guide me on how to overcome this issue? please

[@eddiecurrent7721]

The mstsc function in Powershell didn't work and gsve me an error message saying that I cannot connect to another console session on the remote computer because you already have a console session in progress? What do I do?

[@brendencollins411]

Simple and straight forward. Thank you!

[@Larimuss]

Thanks for the video. Though I don't think anyone should learn how to do it this way as Hyper-V Server should be standalone. I would love to see a good install guide on this.

[@noirth-security]

Richard I did one I think, care to check mine out?

[@DonWon4725]

Depending on your setup most windows 10 virtual machines are completely laggy over rdp protocol either way good tutorial thanks for sharing your expertise.

[@nagendra4274]

was unable to see the options what you were selecting. It would be good if you zoom the pop up on which you are working.

[@darshan3869]

after installing hyper v server my machine not booting up Any resolutions?

[@rithdarachann]

A Golden heart from Sharing is inside you brother :)

[@livestronger1981]

Does a VM need to go through the VirtualNIC or can you point it directly to the NIC on the host?

[@danimoosakhan]

Is there a thing called Type 1 hyper-visor for Microsoft which installs directly on bare metal hardware?

[@danielgiallombardo9914]

Any time you install the hyper v role on a windows server you're implementing a type 1 hyper-visor, it converts the system into two partitions host and child, meaning that the hypervisor is installed on top of the hardware

[@tag1908]

yes there is , type 1 hypervisor runs on our machine's hardware whereas, type 2 runs on the host's OS, in a virtual environment such as using vm workstations

[@dioncoldy]

Straight Forward thank you so much

[@familytravel15]

I am unable to ping from One Host Vm to other host and their VM but able to other netowork computers, gateway and internet is working fine and same happen with other host vM. pls sugegst

[@familytravel15]

@@KZbinTookMyNickname.WhyNot means ?

[@MultiSecret03]

Hello man i just wanna ask when i connect to intrnet my oroginal windows will have some wifi card problms like i cant have interd on a hotspot

[@lylekelley4293]

Thanks for the video. On the HOST system what settings were turned off or on on the Dedicated NIC? was DHCP or Static IP enabled on that NIC?

[@hamzatechtunes]

Thanks for the video. This is helpful, thanks a lot ! Great tutorial

[@Gnba23]

Great video. Is the host on a laptop or pc?

[@CodeCowboyOrg]

Its a PC.

[@DJMegabit]

can you pick the core of the CPU the VMs will use?

[@IdealnetCa]

In your video, what IP scheme are you using for the Ethernet Adapters

[@danimoosakhan]

Ideal Networks class C

[@kkkkkkk7559]

So once I install hyper v on my windows 10, will it take our the windows 10 kernel and make my existing windows 10 as one of the guest machines ?

[@applegamer7467]

yas

[@daljitsandhu3897]

your windows 10 will be host machine and then any virtual machine you create in hyper v, will use resources from your windows 10 machine. in this video he was using server with high end resources that's why it looked smooth.

[@SylvioMedeiros]

Worked just fine, thanks a lot! Great tutorial

[@apostlelshelly9900]

Do anyone know how to install ProctorU VM with out being detectable?

[@KylinFinley]

I bought Windows Server 2016 Datacenter and reading online I am allowed to license as many VMs as I want, but I am unsure how to do so. I tried running *slmgr /ipk * with the correct key on my Windows 10 Pro virtual machine, but no luck. Do you have any suggestions or ideas to point me in the right direction? REPLY

[@RSO-IV]

Mine just installed/copy as many VMs as possible. My hardware Dell R720xd allows me to put about 30 VMs with each VM at 2vp and 2vram. You can add some GPU (Powerful Graphic Cards for gaming or technical drawings) too for the VMs. Check your PCIe slot.

[@arontigerful]

I got the message "The Hyper V can not be installed. The processor does not have a required virtualization capabilities"

[@fluxkraken]

Then you need a processor that supports hyper v.

[@toohonest8725]

Boot into your bios and see if you can enable virtualization on your processor. Some have it disabled by default.

[@LUCASSOARES-vj7sj]

you need to enable virtualization on your bios.

[@dannysanders4327]

In your video what you are pointing to as a virtual swtich is actually your virtual nic, 2nd because you are using one nic for your host managment, the box to create that management vnic that you call a vswitch should be unchecked.

[@rmmr8513]

Can someone let me know, why do you remote into the VM when you can just Alt + Tab into the VM?

[@MaxPdagreat]

Rm MR to show real world scenario- you will be rdc into the server

[@O2D2BL]

Hi thank you for this tutorial from where you choose that ip address for the server ?? thak you again

[@MasterofPlay7]

how do you share folders between host and VM in Hyper V? I googled and still couldn't get it to work

[@O2D2BL]

@@MasterofPlay7 make sure your host and Hyper V they are in same network adapter and make share folder as usual (:

[@MasterofPlay7]

how do you share folders between host and VM?

[@MasterofPlay7]

@@TM-ky7kn Thanks bro! yes I did that, it asked me for password and stuffs which I did and it works!

[@aithasan1181]

thank you so much buddy that was awesome tutorial

[@desu6544]

Thanks so much, this was so helpful.

[@MrAnkit3011]

which software u have used for recording ?

[@CodeCowboyOrg]

CamStudio.

[@danimoosakhan]

Can I use RDP from Windows 10 home edition?

[@tag1908]

yes you can, you can do this via System Properties- Remote.

[@danimoosakhan]

Can I make multiple Virtual switch from only one NIC?

[@CodeCowboyOrg]

Yes you can.

[@dannysanders4327]

That would not be best practice

[@ghsiii9399]

when it finished install my windows server on hyper-v i get like cmd message : C:\Users\Administrator how can i fix it?

[@fedora296]

great video thank you it did help big time

[@Mahiedu]

video quality not good, Can"t see any option

[@NewPlayer4U]

It is in FULL HD. Are you fcking blind or stupid?

[@NilangaChandrasekara]

Hi Do we need to have a Virtual Switch?

[@ezerasurfr]

no, but you'll bottleneck your NIC should you have these as active VMs - not just test boxes.

[@dannysanders4327]

Yes you need a virtual switch this is needed for your VMs as they talk directly to your vSwitch

[@prachi9652]

What is the minimum hardware requirement for this ? I have 8 GB ram and 1 TB hard disk. Does it works?

[@8pins]

Yes, this is possible. Please consider as well that your hardware support Virtualization.

[@Nadine.Elaine2016]

Hi everyone.. is anyone here can do project use the Vertual Machine windows 16 please

[@omerhaggar9188]

Thank so much ineed to contact you

[@afexツ]

omg.. whre is the server manager ??

[@afexツ]

In win10

[@MastaHipHopapotomus]

it doesn't exist anywhere!

[@MastaHipHopapotomus]

only in every single tutorial

[@totalkiller4]

not in win 10 only in win server :)

[@x4ndro129]

win 10 is not a server

[@user-km6hc3ez6o]

Very nice. Good job, sir. Nice. Yes.

[@odairjpsantos]

Very good. Thanks!

[@mailwormhole]

This is helpful, thanks!

[@beautifulscenariosbd2172]

nice and helpful video.

[@kpinvestments3768]

awesome explanation

[@naifox1]

Please Next time zoom in the screen so we can watch much better what you are doing

[@worldweltweit6929]

respect for u :-) thnx

[@judicaelebaengolo5601]

Merci pour le tuto vraiment utile

[@giovanniatanasio4328]

THANK YOU!!!! WELL DONE!

[@asmrvidsexe1518]

um iso?

[@highwayhash]

Excellent

[@messageofgracetruth943]

great

[@markvickers8353]

6 ads is excessive mate, one every 4 minutes

[@cyberjack]

could just use VirtualBox to accomplish the same thing ..and its less messing about ..that's what I do on my server

[@litcherallyy]

THANK YOU SO MUCH

[@litcherallyy]

I can't find Server Manager

[@Denveradoo]

Thank you

[@max31505]

well ,thank you

[@breakingsword]

thanks bro. :)

[@ownd86]

Well done

[@TheStevoth]

Ossum!

[@eddieperez5549]

great vid

[@no10live]

good job

[@HammadArif707]

THANKS!!!!!

[@DeepFrydTurd]

sweeet :}.

[@joseflokmani2081]

way too many ads

[@nimishchandra7952]

nice Video

[@Ganesh-gq1di]

WARNING:---- Expired in 2020!

[@nsg3968]

can anyone send me a license?