How to make a quarter coin ring with FORGED Book 2

A link for book is coming soon. we are working on getting it published along with the bonus video.
Check out my rings and classes for sale
www.changeyoucanwear.net

[@SilverSergeant]

Just received my Jason Works starter kit and all my supplies...This video is exactly what I needed !!! Thanks!!!

[@1967woody1967]

I have seen almost every demonstration on youtube and this is by far the best methodical approach. He shows not only what he is doing but also options where applicable. The sound, lighting, and subscripts is frosting on the cake. I know this must having been an ordeal, but I hope you do more of these. If you haven't already subscribed, do it now. Great for beginners and veterans. Thanks

[@CoinRingsfromTheMint]

Thanks! I have been working on this for almost a month lol. This is the first video that I sat down and actually wrote a script for. Editing takes me forever too! I really appreciate the comment.

[@nickbabb5869]

You make the best rings I've ever seen!!!!!!

[@CoinRingsfromTheMint]

Thanks!!

[@sarahamazinggrace]

Great to see you, Skyler! Wishing you well

[@CoinRingsfromTheMint]

Hey! It is great to hear from you! I feel like I'm 100 years away from being sick with Lyme :)

[@goonole]

Great job Skyler!

[@CoinRingsfromTheMint]

Thanks Randy!

[@hankookbna6198]

Good job..very like it.your video open my inspiration..thank's brother....👍👍👍👍

[@CoinRingsfromTheMint]

Right on thanks!

[@dagodigger487]

God Bless you thank you for sharing

[@CoinRingsfromTheMint]

Thanks!

[@Gratitude788]

I'm just finding your channel and I very much appreciate your wisdom. Hope you see this I would love to know where I can find un- circulated coins.

[@CoinRingsfromTheMint]

I find them on eBay or in coin shops.

[@jmanjman4427]

I watched your video and got stuff ordered I have access to machine shop at work. Can you make a size 10 ring out of a quarter, if yes what size hole do you put in quarter to start.

[@rlin2648]

Very nice

[@davidrivera5114]

Anytime my brother

[@USAlien234]

Do you have a video on how to curve both edges in ? I like the oval edge shape as oppose to the flat on each end. Excellent video btw ! Subbed and liked ! God Bless

[@terryswails1191]

Awesome

[@Imtimmahler]

8:26 God Bless man!

[@CoinRingsfromTheMint]

Thanks you too!

[@davidrivera5114]

Oh wow sorry to hear that my brother i will keep him in my prayers anything u need let me know

[@CoinRingsfromTheMint]

Thanks

[@davidergle4334]

I am just getting started, and have ordered the tools you show on your video and I have a couple of questions. 1) How do I order your Book 2, and 2) will a one ton arbor press punch a hole in a coin? Thank you - you have great videos.

[@CoinRingsfromTheMint]

Right on I'm excited for you getting started! Unfortunately the book never happened. My co author got busy with a major move and we never got back to it. But you have all the information in the video to be successful. Some people cut holes with a 1 ton but it isn't easy. I'm sure it is bad for the press too.

[@MDogg1960]

Is there a reason you don't use a press to cut the hole in the coin?

[@juanmanuelluna884]

Amazing... :)

[@CoinRingsfromTheMint]

Thanks!

[@martywade7935]

question, where are you buying coins? "The Mint" Also I bought a ring from Coin Rings from the Mint, I love it. I have bought the presses and die sets and watched a ton of videos. Keep up the great work. Cant wait to get started. God bless you brother!

[@CoinRingsfromTheMint]

I buy my clad coins by the roll uncirculated. There is a local coin shop that I get most of them from. If they don't have them I buy uncirculated rolls from Ebay. I'm glad to hear you are getting into coin ring making! It is a ton of fun. You can also buy them individually but it can be a bit more expensive.

[@martywade7935]

Guess I need to get over punching a hole thru a dated coin. I better practice before I try an older coin. Thanks again!!!

[@wayneburba9457]

Very good work, a list of where to buy tools, and a price list for your rings would be handy.

[@CoinRingsfromTheMint]

Thanks! I will have a list of tools and supplies along with links with the book when it gets finished. I finally got this video edited and probably should have waited until it was all finished. But I was excited to get this one out :)

[@JTCoinRings]

Coin Rings from The Mint - Change You Can Wear I love this custom coin creation...How much would you say the total cost would be for all the necessary tools that's in this video...I would like to budget for my purchase.

[@CoinRingsfromTheMint]

It says in the video. $300

[@JTCoinRings]

Coin Rings from The Mint - Change You Can Wear Thank You...

[@mjunger2012]

Very straightforward info. www.clayclothmetalcraft.com

[@SDLEIKAM]

Great videos. I am helping my artist teenager get started. Should the quarter be annealed before punching? Wouldn't it allow the punch to stay sharper longer?

[@CoinRingsfromTheMint]

I don't. I have never needed to sharpen a punch personally.

[@SDLEIKAM]

@@CoinRingsfromTheMint Thanks for answering!! We weren't sure. :)

[@Ken_Dalton]

Hi Tyler, can I ask why did u choose to punch out half inch hole? Would u and could u not do a much smaller hole and stretch out the ring to make a thicker band to show more coin detail? 🤔

[@CoinRingsfromTheMint]

You could but I like the quarter rings as thinner bands. You can always use a half for a proper thicker band.

[@Ken_Dalton]

Change You Can Wear yeah OK I get u now. I was just curious,. I'm from Ireland an just stared by Makin wood rings, an eventually metal, n now coin rings,we had alot of different old coins that are outta circulation now but luckily I have a fair few... Have to get my American pals to coin hunt for me tho as it's difficult for me to get my hands on them other wise. If u know any good sellers of coins that be hugely appreciated any advice that you would have.. Ones that are not crazy expensive lol.. All the best with the channel, happy I subscribed last year an have learned alot 👌 God bless

[@Dulles-jt6sr]

@@Ken_Dalton His name is Skyler.. and yeah I always wondered that.. 😆

[@peterpit1]

What type of board are you using for annealing? Do you have a link to where I can get one?

[@CoinRingsfromTheMint]

It is a fire panel. You can find fire bricks for sale at home improvement places though.

[@iankuhl8492]

I have a small question, I just started making rings out of everyday quarters, and the problem I'm having is that the serrated lip of the coin is wider. Like the problem you had at about 10:52 of this video. I have been generally following the instructions from your low tech video, "how to make coin rings for cheap". All I have is an anvil, bench vise, and a nylon hammer, any suggestions?

[@CoinRingsfromTheMint]

It sounds like you are going well with the low tec. Method. Unfortunately you need to do a bit of tooling up to get to the next step. Dealing with that taper requires tools for sure.

[@iankuhl8492]

Coin Rings from The Mint - Change You Can Wear Ok, thanks for the imput! It's really awesome that you reply to questions in the comments

[@CoinRingsfromTheMint]

I really try my best to keep up :)

[@michaellauffenburger]

Hi Skylar- you've probably already posted it before, but can you tell me where you buy your uncirculated US coins? You mentioned you get them for slightly over face value, but the places I've looked mark them up 200%-400%, Thanks, Mike

[@crzbords9839]

iwant to by how much size 7

[@coreychurch6868]

Hey Skylar, great video. Do you know what the angles are on the starter cone and the folding cones??

[@CoinRingsfromTheMint]

They are 17 degrees for the dies and cones but not sure in the starter cone

[@coreychurch6868]

@@CoinRingsfromTheMint thanks for the help bro

[@SaintDomenic]

Good video thanks for taking the time to make it. Very much appreciate it. I have just one question, if I wanted to do this with silver, what extra steps are needed? that part wasn't in the video.

[@CoinRingsfromTheMint]

It’s all the same except for the antique finish with silver. Check out my 4 ways how to antique silver video for that.

[@SaintDomenic]

@@CoinRingsfromTheMint thank you

[@SilverSergeant]

How do I reduce a ring down to size 4? I used a 1/2 inch hole....but I can't seem to be able to reduce the ring enough in the .9 die.....

[@CoinRingsfromTheMint]

Swedish wrap dies are the key.

[@SilverSergeant]

@@CoinRingsfromTheMint oh..ok...that makes perfect sennse.....thanks.....I really enjoy your videos.

[@armysnoopy1562]

Sir when is that book coming out ? I really need to buy it. Thank you. GO ARMY

[@wallyandellen5099]

Hello Skyler, with that particular coin ring, what was the initial size hole that was punched? ie, 1/2" or smaller. Thanks, great video, curious how long it took to edit.

[@CoinRingsfromTheMint]

That one I used a 1/2" hole. I edited this video over 3 days. I would guess 3 or 4 hours total. I'm pretty slow at it.

[@wallyandellen5099]

Thank you Skyler, I started working on video's and its like forever....never ends, always something missing...the edit icon disappeared!

[@edbattista4064]

where is the book?

[@petefriesen8095]

want dos that kite cost that you showed

[@davidrivera5114]

Awesome video like always my brother how are u and the fam doing been a while since we last spoke.

[@CoinRingsfromTheMint]

Hey David! Actually my family could use some prayer. My dad broke his leg the other day and because of complications to the surgery, he is basically in a doctor induced coma. We are all praying he gets through it.

[@lindawallace6750]

Do you sell Your Rings ??

[@jerrymarroney6829]

Skyler did you publish the book yet. Thanks

[@CoinRingsfromTheMint]

Not yet. Hopefully soon :)

[@jerrymarroney6829]

Thanks

[@edbattista5456]

when are you going to have the book.

[@CoinRingsfromTheMint]

I have no idea at the moment.

[@edbattista5456]

All hear is the book is coming when will be out when is that

[@CoinRingsfromTheMint]

I'm not sure. My co author has been busy and I didn't want to wait to get the book. It is on the way at some future date.

[@suryaraj9593]

Bro do a ring with India coin

[@Steven-Zayyan]

how much tools if i buy?

[@CoinRingsfromTheMint]

Under $300

[@edbattista5456]

when are you going to put book.?

[@CoinRingsfromTheMint]

At this point I'm not really sure. My co author has been moving and hasn't had the time.

[@crzbords9839]

i asking about coin is not fake

[@crzbords9839]

u have century coin like 1890

[@k.w.churchill4397]

Would you make a Morgan dollar ring, if I send you the coin?? The coin was my grand dads, but it got a couple good scratches, and I need a wedding band!!

[@CoinRingsfromTheMint]

Sure thing! Contact me through my website. My phone number is in the contact section. www.changeyoucanwear.net

[@voldem273]

At 09.00 you use the „pepe lube“. What exactly is that? Looks like wax or something. This stuff is not available in Germany, so that I have to look for a replacement 😳

[@CoinRingsfromTheMint]

It is just a dry lubricant. You can get away without it.

[@edbattista4064]

the book where is it. you telling me that can,t get this book publish come on lets ju st get book to the people.

[@edbattista4064]

were is the book.

[@CoinRingsfromTheMint]

My co author has been busy. I'm not sure when it will be done.

[@ronnewton606]

looking for your ebook ???

[@CoinRingsfromTheMint]

Still working on it lol

[@pirshahnawazjelani9715]

Tool book thatta karachi

[@Imtimmahler]

What kinda Christian are you? Or are you Mormon or catholic? I’m a Methodist.

[@CoinRingsfromTheMint]

I have gravitated towards Baptist but to be honest, as long as we can gather around Christ that is what's important. We might not always agree on the small stuff. But in the end it won't really matter.

[@jackieschofield7041]

Are you ever mistaken for Chris Hemsworth?

[@CoinRingsfromTheMint]

Never heard of him until now :)

[@jackieschofield7041]

Chris Hemsworth is Thor. :-p

[@CoinRingsfromTheMint]

Haha oh. In that case yes I'm mistaken for him all the time.

[@jackieschofield7041]

'And thats about it?" REALLY? I was expecting the kitchen sink as well. lol

[@CoinRingsfromTheMint]

No you have it all wrong. You get the kitchen sink in book 3 haha