I have found that with any portable generator shutting off the gas and letting it die is the best way to shut the unit down and keep the gas lines clear.
@coastalplayer7 жыл бұрын
Thanks for this, did it in the garage in Fresno,TX during the end of hurricane Harvey,we never needed it but it's ready for hunting season. Your vid inspired me to get to it instead of the death and destruction on TV. I pulled the float bowl. Used a copper wire strand rodded out every port and carb cleaner spray,buttoned it all back and 2 yanks then smooth running.
@Iridium2427 жыл бұрын
Cool, glad I could help. Stay safe down there!
@davidbradsher84607 жыл бұрын
I have this same generator - it was surging like that as well. Thanks for doing this! Very helpful!.
@Iridium2427 жыл бұрын
Cool glad I could help.. This was one of the first videos I did when I started doing them regularly, so its kind of an old one but its good to see its still helping people out!
@george257110 жыл бұрын
We have a Groban 5600W generator with the B&S Vanguard 9HP OHV engine and it started doing the surging thing and that means it's running too lean. I started feeding it some 'Sea Foam' additive and that is clearing it up. We bought the generator when we moved here in 1997 and I do a test run of it every few weeks. It had it's first real work out in January or 2007 when the power was out in Pahrump for almost 14 hours, I think it used 6 gallons of gas that day. B&S recommends 30W non detergent oil for the engine and I change it once a year. It's electric start, just turn the key unless the 10 year old battery is run down. Then just pull the cord and it starts on the 2nd pull. Stabil in the gas along with some Sea Foam to keep the carb clean and do a test run more often as when the power is out you need it to run perfectly. The only bad thing about this rig it it weights 350# and it's so loud when I fire it up all the birds in the trees take flight.
@cawag98 Жыл бұрын
Thanks for the video.
@GeorgeSimpsonjr-si1ne4 ай бұрын
It's not putting out power need to know where the fuses are
@jaguon46195 жыл бұрын
thank you what type of oil
@kevinbresee2 жыл бұрын
Where can I find carburetor for my Coleman powermate 1750?
@chimpchowder57745 жыл бұрын
Hey, anybody know what oil WT. To use in these? I got the 1750. Thanks!
@Iridium2425 жыл бұрын
I always used SAE 5W30 as that is what I was told to use when I got it years ago.
@pabloc56344 жыл бұрын
I have that same generator and fuel kind a spits out of the fuel cap. I replaced the old one and it still has the same problem. Can you help me solve this issue
@genejuarez82109 жыл бұрын
JUST HOW FAST (HIGH RPM) ARE THESE SUPPOSED TO RUN WHEN THERE IS NO DEMAND?
@2truckie8 жыл бұрын
3600 rpm
@jmiller18214 жыл бұрын
Is my Coleman Powermate Sport 1600 same? Any help appreciate. It starts at 3/4 choke not on run......
@ozarkmountainranger42015 жыл бұрын
Iridium242, have you noticed anything around the carburetor that would cause a slight fuel leak. I got one of these recently and had taken it down to replace the recoil start and when I put it back together I notice there is a fuel leak. I am unsure what that little tube directly behind the carburetor is that faces downward but I thought it seemed like the leak was coming down in that area
@Iridium2425 жыл бұрын
Nope, no leak in mine, I just checked and I dont even see the tube you are talking about but I will look more in the AM when I have more light.
@ozarkmountainranger42015 жыл бұрын
@@Iridium242 ask my buddy who does Small Engine he said it's just a breather. It seems to leak more when I tip it up on end but there is no leak in the fuel lines
@chimpchowder57745 жыл бұрын
Ozark Mountain Ranger float adjustment but may need to tweak it just tiny tiny bit.
@russb81513 жыл бұрын
the bolt in the bottom of float bowl has 3 holes(2 on sides,one on top)If any varnish/dirt plugs any of the 3 holes,it won't run.Float bowl will stay full,& then leak gas.
@tazbud337 жыл бұрын
Hi there, Do you know of this generator is a bonded or a floating neutral?
@johnshissler63162 жыл бұрын
Mine says it’s floating
@cawag98 Жыл бұрын
I have an 1850 Powermate pulse (it's grey instead of red). Mine is floating between neutral and ground AC receptacles also. This is good because it means you could connect it to a transfer switch.
@a2cryss6 жыл бұрын
When and how did you add sea-foam? I disassembled the carb on mine and blew everything out with carb cleaner. No passages were clogged. it surges no matter where the choke is and sometimes when the governor goes to full throttle, it just stalls out. Needs starter fluid to start.
@Iridium2426 жыл бұрын
I sprayed it into the carb while it was running. Mind was not all that bad, just some surging, I was not sure it was even the carb, I changed out the gas to new gas and it went away.
@jeanbrodeur96676 жыл бұрын
Any chance to get a video on how to replace the self-destructing pull cord?
@chimpchowder57745 жыл бұрын
Jean Brodeut dude it's super easy. Self explanatory. Take it apart put it back together . Any 10 yr old can tackle it. So just go for it.
@RagedContinuum11 ай бұрын
thanks - your advice was short but pointless@@chimpchowder5774
@RagedContinuum11 ай бұрын
thanks - your advice was short but pointless@@chimpchowder5774
@ChristophersVanLife5 жыл бұрын
What kind of oil did u use
@Iridium2425 жыл бұрын
I have been using 5W 30 now for years, seems to work well.
@amberrivers816 жыл бұрын
we have one like it but get it to make power like the video