I bought the 1/4" valve from you all and put it in-line between my dual port and my apple blossom 5 gal. And even when I have it turned all the way off/closed it pulls a lot of surfactant 🤷♂️
@Powerwash Жыл бұрын
That is odd. Have you tried to replacing the valve. If the valve is closed it should draw any surfactant.
@fulltimedadhouston Жыл бұрын
Does that work with 200 ft of hose ? Thanks
@Powerwash Жыл бұрын
Yes
@alanphillips13442 жыл бұрын
How would I hook up your downstream injector to my remote injector?
@Powerwash2 жыл бұрын
Put it in the same place as the current injector
@alanphillips13442 жыл бұрын
@@Powerwash normally, you would run the SH Lin thru the downstream remote. Now, you’ll have a surfactant line, how would you hook that up?
@Powerwash2 жыл бұрын
@@alanphillips1344 Not sure without seeing how the remote is plumbed
@brian2100 Жыл бұрын
You should did up those old vcr tapes Delco used to sell starting your own power washing business truck washing hood cleaning and marketing
@robertschwarz68492 жыл бұрын
Will this dual port work with my remote box??
@Powerwash2 жыл бұрын
I believe so. Just plumb it in where your would the down stream injector
@littlespressurewashing2 жыл бұрын
Awesome 👏
@azxp2 жыл бұрын
Love the video and love the tool, but I am confused about the soft wash part. What makes that a soft wash? You are using a 5.5GPM pressure washer with a jrod and a downstream injector. Unless I am wrong, isn't that a pressure wash? If it isn't then I am confused about the difference between a soft wash and a pressure wash.
@Powerwash2 жыл бұрын
Great question! As far as equipment goes it is a pressure washer and there is soft washing equipment as well. But the difference between soft washing and pressure washing is the impact pressure on the surface. So, regardless of the equipment used the method of application and how the pressure washing is used will determine if you are soft washing or pressure washing.
@Ninjaraf6262 жыл бұрын
Found my next purchase. Can’t afford to build a skid yet. This is a great way for my truck bed to be useful instead of carrying a pale around.
@isabellaadkins78923 жыл бұрын
I’m assuming you can meter the bleach also? I’m just starting with a downstreaming setup. Not sure how much bleach is coming thru yet.
@Powerwash3 жыл бұрын
Yes
@truthseeker15322 жыл бұрын
If I put one end in SH and the other in H2O, would this achieve a 50/50 downstream mix? Im looking for a way to do this without having to batch mix my house wash mix
@chrisangell52413 жыл бұрын
How do you know what your draw rate is for the SH and surfactant with this injector? so say ur pumping say 4 gpm, how much from each injector is being pulled so I know how hot the mix is in terms of percentages?
@HouseWashingRick3 жыл бұрын
Great question hopefully someone will answer you and me
@Skill_Issue922 жыл бұрын
Do a bucket test and have both 1 gallon jugs marked so you can figure out your draw ratio.
@mikecoughlin41283 жыл бұрын
Why do you have to batch mix the apple with water first instead of utilizing the metering valve?
@Powerwash3 жыл бұрын
Because it is highly concentrated. Otherwise you will be wasting the product
@Ninjaraf6262 жыл бұрын
Been waiting for a reply from the website. I generally only use PayPal for online purchases to protect my banking details.(I have had my information compromised and used before). Is this a feature you guys will have soon? Would sure like to buy this stuff from you guys since the season is here.
@Powerwash2 жыл бұрын
Paypal is difficult to work with on the back end and reconciling transaction. We would really like to do business with you as well. Can you give us a call, perhaps there is another method that will work for you.
@maximumpressurewashing45914 жыл бұрын
nice video, can use with 12v system with proporcioner?
@Powerwash4 жыл бұрын
No, 12 volt systems do not create high enough pressure to for down streaming.
@xtremepowerwashing18153 жыл бұрын
Do you mean hooking up your lines to a proportioning valve system..if so, yes you can..hook up would be on the out that side of your proportioner. But you will not be using your 12 volt pump at all.
@TheMhowi0073 жыл бұрын
I've been noticing alot of guys putting three injectors on the hose reel after the pump I didn't know you could do that great way to avoid putting SH through your pump do you still get the same results?
@TheMhowi0073 жыл бұрын
@@stevesteve4383 thanks Steve hence the term downstream lol much appreciated
@troymorgan24013 жыл бұрын
Does this draw Chems and apple blossom in an 8gpm machine with 200 feet of hose?
@luxury654 жыл бұрын
As always great tool and information
@michaelerichsen60753 жыл бұрын
So this helps apply the chemical and soap will it be enough to to keep us from having to upgrade to a soft wash system ? This is a big question 90% of people are trying to figure out that are getting started
@Powerwash3 жыл бұрын
This will work for house washing and se light roof cleanings. Normally, to do roofs you need a softwash system
@artbentley48872 жыл бұрын
Hello, would it be possible to use the soap injector at the pump and then the xjet ? Wouldn’t it be like a dual injector?
@Powerwash4 жыл бұрын
👍 Check out the dual-port injector and let us if you have any questions. www.powerwash.com/blog/injector-kit-apple-blossom/?.com& 👍 Mixing station make soft washing easy kzbin.info/www/bejne/ZoO3d5djgLubfrc
@zadok222 жыл бұрын
Isn't your full flow from your PW greatly reduced by squeezing all the water through the injector without a bypass loop? Or do you have a bypass that I am not seeing? Would a Flow Pro where it turns the valve off at the bypass be mechanically better? (or could you build one the same way). I am just trying to understand fullyy the soapbox
@Powerwash2 жыл бұрын
The bypass loop only applies when you don't want to use the injector to achieve full flow. If you have the bypass and the injector at the same time the injector won't work correctly and mostly likely not at all.
@michaelc72833 жыл бұрын
Hi Mike, When you pull (SH) through the line without the adjustable valve do you then put it into a clean water bucket after your done to rinse out the injector? Or do you have clean oit both lines 🤔?
@Powerwash3 жыл бұрын
I recommend rinsing it out after every use or at the very least at the end of the day. Bleach will corrode the injector if you don't rinse.
@michaelc72833 жыл бұрын
@@Powerwash Do I rise the (SH) line only or both?
@Powerwash3 жыл бұрын
@@michaelc7283 just the SH is necessary
@michaelc72833 жыл бұрын
@@Powerwash Sounds good 👍 Thank you
@patricklacasse28773 жыл бұрын
Does each side of the dual port Venturi except 20 to 1 or is it 10 to 1
@wellsmd14 жыл бұрын
can you downstream sh from both of the inlets ports ??
@xtremepowerwashing18153 жыл бұрын
Yup 👍🏻
@lukeknighton49183 жыл бұрын
i was thinking the same thing
@michael89903 жыл бұрын
Why? You won't get any higher percentage hitting the surface than using a single port.
@xtremepowerwashing18153 жыл бұрын
@@michael8990 that's not what he asked.
@michael89903 жыл бұрын
@@xtremepowerwashing1815 Just clarifying that it would be a waste of money with no benefit to use both ports. No bad intention of implied.
@joserafael14853 жыл бұрын
Sh 50/50 of what ??? Sh 10% or 12.5 % ? What’s the draw ration on this dual barb injector ?