Como instalar ESPHome en relé Sonoff dual para Home Assistant

[@Aitorsedano]

Muchísimas gracias!!!! Sigue así!!!

[@DIYKN]

Gracias

[@rogeriocamargo1984]

Muito Bom. Parabéns pelo video! Você tem o código exemplo do YAML para compartilhar ?

[@DIYKN]

esphome: name: dualr3lite platform: ESP32 board: esp32dev # Enable logging logger: # Enable Home Assistant API api: encryption: key: "key" ota: password: "pass" wifi: networks: - ssid: !secret wifi_ssid password: !secret wifi_password # Optional manual IP # Enable fallback hotspot (captive portal) in case wifi connection fails captive_portal: text_sensor: - platform: wifi_info ip_address: name: "dual_r3_ip" - platform: version name: "dual_r3_version" sensor: - platform: uptime name: "dual_r3_uptime" - platform: wifi_signal name: "dual_r3_wi-fi" update_interval: 120s binary_sensor: - platform: status name: "dual_r3_status" - platform: gpio pin: number: GPIO0 mode: INPUT_PULLUP inverted: True name: "dual_r3_key_0" on_click: then: - switch.toggle: dual_r3_relay_1 - switch.toggle: dual_r3_relay_2 - platform: gpio pin: number: GPIO32 mode: INPUT_PULLUP inverted: True name: "dual_r3_key_1" on_state: then: - switch.toggle: dual_r3_relay_1 - platform: gpio pin: number: GPIO33 mode: INPUT_PULLUP inverted: True name: "dual_r3_key_2" on_state: then: - switch.toggle: dual_r3_relay_2 switch: - platform: restart name: "dual_r3_restart" - platform: gpio name: dual_r3_relay_1 pin: GPIO27 id: dual_r3_relay_1 restore_mode: restore_default_off - platform: gpio name: dual_r3_relay_2 pin: GPIO14 id: dual_r3_relay_2 restore_mode: restore_default_off status_led: pin: number: GPIO13 inverted: yes