Connecting the victron charge controller & victron multiplus II inverter.

[@PhG1961]

Indrukwekkend, maar waarom niet netjes afgewerkt met wartels en/of aangepaste kabeldoorvoersystemen?

[@easypowerwall]

Heb je zeker een punt, mogelijk dat ik dat nog retrofit. Bedankt voor de feedback.

[@michalknapek5697]

One thing is not clear to me. How you connect MPPT and Multiplus together? If you put Batt connector to Batt from MPPT OK and then BATT connector to Multiplus? How?

[@easypowerwall]

Hi Michal, It's all explained in this video: kzbin.info/www/bejne/lWjHaICgYrWif9E Cables from MPPT and the multi plus all connect to the copper busbars above the battery shelf. Check the video. If it's still not clear don't hesitate to contact me. EASYPOWERWALL is also on facebook. Have a nice day. Franky - EASYPOWERWALL

[@JohnKisenga]

Why not use the inverter in master/slave configuration for inverters to share the load. Those inverters are designed for it

[@easypowerwall]

That's the goal, I'm working towards this solution. But thanks for the tip. First thing to do is increase the size of my wireing to 6mm. Will be on the channel too. Frank - EASYPOWERWALL

[@sangagodfrey5077]

V.E. BUS PORT.NOT VE DIRCET PLS