We already did one for the Panhead. Here"s a brand new one, complete with spacer, for the the Knucklehead. No more rattle!
Пікірлер: 130
@cameramanmike20723 ай бұрын
Hello Good People. I Apologize for the Shaky camera. I am using a new camera Handle as to hold the camera better and Not Drop it. Im not used to it and im not sure I even like it Sooo again I Apologize. Thank you all for watching 👍😊
@williamsnyder12053 ай бұрын
To tell the truth I didn't notice any shaky camera, keep doing what you do, it works!!! Thanks
@steveallen50873 ай бұрын
Keep on Mike! It’s ok. I just thought the ride was rattling along with Mike!
@darknitethunder3 ай бұрын
Hey Mike got the Shakes, ? Time for another Coffee break 🎉.
@mikescanlon64393 ай бұрын
A gimbal will help with the shakes.
@gearheadindustriesmedia68903 ай бұрын
All good mate.. you can use a mono pod.. it’s like a tripod just a stick.. you can change height.. or a gymbol. awesome content..
@markackermann6733 ай бұрын
Looking forward to the flathead build.
@pacificmike95013 ай бұрын
Me too.
@cameramanmike20723 ай бұрын
🤞🙏🏻👍😊
@clintonlunn43573 ай бұрын
Your videos are great. You thoroughly explain in a calm, sincere, and friendly manner. Thank you for your videos.
@pacificmike95013 ай бұрын
Thank you very much!
@michaelyarmie48583 ай бұрын
Back in 1997 I bought myself a brand new Harley Davidson XL 1200 Sportster. Candy Violet Pearl. I bought it in July '97 August I put my leg through a rotten 2X4 on a boat dock. Well the rest of that summer was shot for riding. Leg was every color you can imagine for about 6 months. But the next summer. When I would ride. Being a Sportster. I rode it like I stole it. In September i started hearing a rattle vibration at around 4000 - 4500 RPM's I thought it was the top end making noise. So the rest of the season I just rode it until it snowed. So the nest summer I still had that annoying rattle vibration somewhere in the top part of my bike. So one afternoon I was at the infamous Confusion Corner in Winnipeg going to visit my Mom. God Rest Her Soul. She left us May'23. But as I was leaving one of the stop lights. Of course hammering down on my Sporty. It started rattling. Well i looked down and the gas cap was rattling. And that's what was the making the top end noise I was hearing. Off to the Harley store I went. But noises and rattles can drive you nuts.haha..
@pacificmike95013 ай бұрын
That's great news. You diserve some.
@2na-phish3 ай бұрын
i love it when a plan comes together as it should.
@pacificmike95013 ай бұрын
Yes, indeed.
@aaronhadley81213 ай бұрын
You should start doing story times with Pacific Mike 😊
@pacificmike95013 ай бұрын
Thank You
@williamsnyder12053 ай бұрын
I loved the story, feel free to tell us another one anytime, much love from Sacramento
@pacificmike95013 ай бұрын
Thank You
@MrBadgas3 ай бұрын
Those dang rattles are earworms. Nothing better than stories from "Out on the Road"....
@pacificmike95013 ай бұрын
And we got some!
@cameramanmike20723 ай бұрын
😂👍😎
@robertbooth14273 ай бұрын
As always guys, great video and I wouldn't mind hearing some more stories!
@pacificmike95013 ай бұрын
Cool. Thank You.
@cameramanmike20723 ай бұрын
👍😊
@johnhild-pt4qm3 ай бұрын
You took care of an annoyance, that is a really good idea.
@pacificmike95013 ай бұрын
Thank You
@markoniemi22853 ай бұрын
that yellow nuckle is a georgous bike
@pacificmike95013 ай бұрын
Thank You.
@midnightmc30963 ай бұрын
Just loooved that story from '79 🔨 I moved to Fresno in April of that year ...but then came to my senses and packed my bags for Dana Point in '81 (。*‿*。) From over on the coast ~ Ride Forever! 🦅
@pacificmike95013 ай бұрын
Makes sense to me. You too.
@midnightmc30963 ай бұрын
@@pacificmike9501 👍👍
@dankennedy94233 ай бұрын
Mike are you sure your in Cali,that's a northeast outfit,lol.
@cameramanmike20723 ай бұрын
😂
@pacificmike95013 ай бұрын
I didn't plan it.
@arthurleino3 ай бұрын
Enjoyed this video! Thanks for the upload!
@pacificmike95013 ай бұрын
Glad you enjoyed it!
@cameramanmike20723 ай бұрын
👍😊
@apaulothegreat15813 ай бұрын
Keep getting up with all you do. Well produced video. We all have enjoyed the information stories. Thank You and Cameraman Mike. For I say being you. Cool
@pacificmike95013 ай бұрын
Thank You
@cameramanmike20723 ай бұрын
👍😊
@apaulothegreat15813 ай бұрын
@@cameramanmike2072 have a great Sunday
@richiebainbridge26083 ай бұрын
Love the riding story 🇬🇧😎
@pacificmike95013 ай бұрын
Glad to hear that. Thank You.
@cameramanmike20723 ай бұрын
👍😊
@keithparr88803 ай бұрын
Great story and good visiting
@pacificmike95013 ай бұрын
Thanks for stopping by.
@cameramanmike20723 ай бұрын
👋😊
@ttjbiggunner20253 ай бұрын
Love the story Mike I'm sure everyone would love to here anymore you would like to share and i bet you have some great ones
@pacificmike95013 ай бұрын
Some we can tell and some we can't.
@cameramanmike20723 ай бұрын
👍😊
@stanleyroberts43813 ай бұрын
Great video,and story 👍👍
@cameramanmike20723 ай бұрын
👍😊
@pacificmike95013 ай бұрын
Glad you enjoyed it
@michaelkoxsolapov85233 ай бұрын
Hello Mister Mike! Im Happy see You☕🍰🥯🥃🪴
@pacificmike95013 ай бұрын
Hello. I'm hard to get rid of.
@michaelkoxsolapov85233 ай бұрын
🤣@@pacificmike9501
@billmillar72343 ай бұрын
And it's BABY DOLL!!😊...... GREAT tee😊
@cameramanmike20723 ай бұрын
❤❤
@pacificmike95013 ай бұрын
Thank You
@kielbasi3 ай бұрын
Great tip with the 45 pedal thanks man
@cameramanmike20723 ай бұрын
👍😊
@pacificmike95013 ай бұрын
Thank You
@darrell33683 ай бұрын
Hello Mike and Mike love your videos it’s to hot for coffee in South Georgia lol. 73 degrees
@pacificmike95013 ай бұрын
I wish you your favorite beverage on a perfect day.
@cameramanmike20723 ай бұрын
☕️😋👍😊
@howardpendle85283 ай бұрын
Great video , love that bike . I"m waiting for the flat head . I a big fan of customs that are ride able like yours .
@pacificmike95013 ай бұрын
I love riding my old bikes. That's what they're for. It took me this long to get to own and enjoy them. The Flathead has taken quite a while just to keep the build going. I'll get there.
@user-ll9zd2dh6h3 ай бұрын
I wasnt talking about a modern harley.I was talking about the exact same part that you got that I ordered from them.A piece of white plastic sleeve was shoved into the pivot hole.The OD and ID on it ensured a sloppy wobbly fit.I think you know about that company's reputation.
@pacificmike95013 ай бұрын
This wasn't like that at all. the bushing is steel. The fit is just fine.
@billmillar72343 ай бұрын
Love the shirt!!!
@cameramanmike20723 ай бұрын
👍😊
@pacificmike95013 ай бұрын
Thank You
@hedonisticpunkvatos3 ай бұрын
thanks again, Mike.
@pacificmike95013 ай бұрын
You bet!
@everettcalhoun81973 ай бұрын
FYI. You have mentioned several times why you use the open end of a wrench because you believe that you stress the two corners less than if you stress 6 corners with the box end. Quality wrenches and sockets are relieved on the corners so they drive farther down the flat. Much like spline sockets they don't drive off of the tips they drive farther in to the center of the slot. Great video. Later Mike and Cameraman Mike.
@pacificmike95013 ай бұрын
Even Snap-Ons can chip the chrome on those corners. I just explain it so I don't have to defend myself every time I grab a nut with the open end of a wrench. Thanks.
@johnjames97993 ай бұрын
Mike .. How is the Flathead coming along. Tell Camera man Mike hey Wasn't that a mechanical locking nut? Too old to see that close but to me it looked like a mechanical nut
@cameramanmike20723 ай бұрын
👍😌
@pacificmike95013 ай бұрын
I didn't know the term. Maybe.
@johnjames97993 ай бұрын
I'll watch it again Hope all is good
@leetownsend463 ай бұрын
Man that's a clean bike great video thank you both 😁
@pacificmike95013 ай бұрын
Our pleasure!
@cameramanmike20723 ай бұрын
👍😊
@randymarks40113 ай бұрын
I chased a rattle for a while, turned out to be a snap on my helmet.
@pacificmike95013 ай бұрын
Very interesting. But, that's using your head.
@cameramanmike20723 ай бұрын
👍😊
@arthurnava45183 ай бұрын
Great looking bike Mike, how come you don't have a rubber kit pedal 😎
@pacificmike95013 ай бұрын
Sometimes I do. Sometimes I don't.
@motometalmind3 ай бұрын
Hello, Mike, thank you for the great videos, sir! Question - how’s the LC Panhead living? Has it been ridden my DTS Mike, or is it sits in the garage?
@pacificmike95013 ай бұрын
Not sure. When you pass something on, you have to let it go.
@meandkathinkihei3 ай бұрын
Hi Mike. Sure would love to buy a couple Tshirts but you’ve been out of XL for awhile. I’ll keep on-a checkin’
@pacificmike95013 ай бұрын
Sorry 'bout that. I'll check on them. I don't know when the next run is.
@mikekovacs53923 ай бұрын
Hey Mike Really enjoy your videos. Great Bike and I apologize if you have explained this already but how do you manage to have your saddlebag draped over your exhaust without issues? Thanks
@pacificmike95013 ай бұрын
Heat shields I made which have air passing between them and the pipes.
@patrickroeill87463 ай бұрын
Good video Mike always enjoy them. But can I ask you a question I have a 46 el with the same oil tank but my return line and vent line are switch around from the way you have yours did I hook them up backwards or dont it matter ? Thank you for any help
@pacificmike95013 ай бұрын
If the level doesn't get too high, probably okay. But I've got mine right. It matters for the space left open in the top of the tank.
@MicahBell_18603 ай бұрын
I'll go rhythm
@pacificmike95013 ай бұрын
Thank You
@snakebite28413 ай бұрын
👍👍
@pacificmike95013 ай бұрын
Thank You.
@cameramanmike20723 ай бұрын
👍😊
@jenkins19792 ай бұрын
Hi Mike,thank you for your videos...Mike I have a 1979 FXS Lowrider HD .Can you demonstrate how to convert my bike from stock controls to forward controls along with maybe a recommendation of which after market controls good to get .? Thanks again Mike
@pacificmike95012 ай бұрын
Well, I don't have a bike in need of that operation at the moment. The forward control system I've used on my Shovelhead has been around forever. It is an all steel setup and is trhe lowest price. Certainly a bargain by my standards. It is the strongest and least excpensive and sold by every major Harley parts aftermarket company I can think of. Just take a look through the catalogs.
@pacificmike95012 ай бұрын
Have a look in the V-Twin (Tedd Cycle) catalog.
@neilo.hislop9503 ай бұрын
How Cold is it Mike ? Wehave warmed up to 6 degrees her in th e North West .
@pacificmike95013 ай бұрын
It's all relative.
@420hondakid82 ай бұрын
hey man i got a pan head 55 model and when i go to kick it does not feel right
@pacificmike95012 ай бұрын
Kind of a vague symptom, don't you think? Maybe better get a Honda with an "electric foot."
@brianbiggs34843 ай бұрын
👍👍🇨🇦✌️🇨🇦✌️🇨🇦👍
@pacificmike95013 ай бұрын
Thank You.
@cameramanmike20723 ай бұрын
👍😊
@thomasprendergast27703 ай бұрын
I'm supervisor at machine shop
@pacificmike95013 ай бұрын
Very cool.
@loddude57063 ай бұрын
0:02 - 'Serf'in USA'? Dressed for England there Mike, 'climate driven wardrobes' are among us! : )
@pacificmike95013 ай бұрын
These old bones get a little chilled. Stay warm, brother.
@cameramanmike20723 ай бұрын
😊👍😊
@rickstout76262 ай бұрын
big flatty ?
@pacificmike95012 ай бұрын
First, there is "big groceries."
@glennbellman11003 ай бұрын
Blame the camera on calif earthquakes. Lol
@pacificmike95012 ай бұрын
It is a large camera. Anything's possible.
@user-ll9zd2dh6h3 ай бұрын
It being a V-Twin part,did it come with a white plastic sleeve which is their idea of a bearing?Pure 100% Grade A crap
@pacificmike95013 ай бұрын
No. Modern Harleys come with plastic bushings in their controls. This is a beautiful and faithful reproduction of an original Harley 45 brake pedal.
@johnhild-pt4qm3 ай бұрын
Hot chocolate is better
@pacificmike95013 ай бұрын
If you say so.
@williamsnyder12053 ай бұрын
Cold beer, any time
@Luhman3 ай бұрын
Hey Mike from NorCal (Nevada City) ! Building my first bike @unlucky.harley