Cool Your Home for FREE with Solar Powered AC!

[@woodystokes1543]

Tech tip push the wire through the wall and make the connections on the floor. Nice work 😊

[@Ryan-RM]

Glad to see a professional HVAC install one of these. Normally it’s solar influencers with no professional HVAC expertise. Happy to see Tad embrace newer technology on KZbin for others to see !

[@Bottomfeedercustoms2024]

Huh?

[@Ryan-RM]

@@Bottomfeedercustoms2024 what’s confusing about what I said? Tad is the first HVAC pro to post a video installing a solar mini split that I’ve seen on KZbin - thus introducing this product to his audience with the creditably of a professional. Most of the other videos on solar powered mini splits are DIY installs or solar installers that are not HVAC pros. It just means more coming from a HVAC technician. That’s all I was saying.

[@halledwardb]

Well, I'll add that I see plenty of non Pros install them WRONG. Most units will work screwed up, but in about 2 years, we get a call.

[@whyyoupissmeoff]

?

[@whyyoupissmeoff]

@@Bottomfeedercustoms2024 My same thought.

[@tadgyro]

I'm a retired handyman, and this is the best informative video for a long time I watch. Short, good English, great job. this was really informative. I did subscribe because I do appreciate it when people like you take the time to produce so much information about DIY for others out there. Thank you.

[@TaddyDigest]

You're welcome. Thank you so much for your appreciation. I'm so glad you left this comment and so glad you watched the video

[@shouketali9695]

I my opinion I should placed template first on wall and mark drain outlet cut and all screws points .

[@javiercoronel1169]

American "English" isnt proper English. 🤡

[@johnbrooks1269]

So nice to watch a pro installer guide us looky-loo's. Very good video! Mounting the solar panels: To max energy research the best angle based on your latitude. Build a semi-stud (only studs) structure with a vertical back for attachment to the shed and angled front for mounting all the panels at the correct sun angle. Sitting down low permits easy cleaning and negates possible wind damage. 🤠

[@ecospider5]

This is a great idea. When you need the most cooling you have the most solar power. Really cool

[@TaddyDigest]

yes exactly

[@slittle3527]

The hotter it is, the colder it gets.

[@kevinkrug466]

Very true

[@PlumCrazyRob]

​@@JohnMoses1897Yes these have Heat also. Rated down to 5F, I've had no problems at -3F (obviously, there will be some reduction in BTU output at that temp, but still working for me.

[@ecospider5]

@JohnMoses1897 0-15kwh 10-55kwh Even on a really sunny day in December my solar is greatly reduced. In December my system produces 0-15kwh a day. During August I produce 10-55kwh a day. So if I am only using my heatpump I will need help from the grid for heat during the winter.

[@brian_atc]

Fantastic step by step instruction. I've seen some of the negative comments but this looks like a very basic and straight forward operating unit. Thanks for showing us how its done!

[@TaddyDigest]

you're welcome 🙏 🤗 Glad you like the video. thank you for watching 👀 😀

[@TKO67]

Best Install Video i ever saw. Not to much talking. Just getting it done. I am now brave enough to buy and install one of these. Just after i buy a leak detector first.

[@TaddyDigest]

Excellent news. Thank you so much for watching Here is a discount Signature Solar Website signaturesolar.com/?ref=kvNaxADKBHncIq Use Code Taddy50 for $50.00 off your order over $500.00

[@philc.9280]

You make the job look so easy for us DIY'ers. Mini splits have come a long way over the years. Thanks.

[@fernarias]

Seeing their prices it would be cheaper to buy a 3kw inverter for 674, 5 400w panels for 600 and a 120v mini split for under 700, that's $1974.00. Not only will it run the AC but provide power for the whole shed. Add 1 48V, 5.12kw battery for 1149 and now your working into the night.

[@pstoneking3418]

I use a minisplit inverter air conditioner on my solar system. It's a 12k unit works great. These things are automatically soft start. No surge starting. When cooling or heating is called for the unit ramps up very slowly. Instead of cycling the unit just slows down and will finally shutdown when not called for at all. These are the absolute best kind of heat pump to be used off solar.

[@PlumCrazyRob]

Ive had 3 of these for over a year. FOUR panels are a bit better install for cloudy conditions on the 12k (Panels produce generally 5-30% power depending on thickness of clouds) . On Cooling this will run with as little as 100W, 200W on Heat. As you become familiar, play with the AC power limiter in APP / "plug" icon on remote - this limits AC power input to 300W. There is a secret button sequence if you decide you want the AC Limiter always on. Enjoyed your vid, thx!

[@moleisrich1]

Interesting. Now this is real world information. Thank you!

[@pecan11]

How much did install with unit run you( assuming u installed?

[@PlumCrazyRob]

@@pecan11 $2k per unit. Panels are half the price now. Yes I installed :-)

[@xaviy649]

what is the secret sequence?

[@PlumCrazyRob]

​@@xaviy649Set unit to Cooling mode, temp to 90F, fan speed on Low. Press Power Limiter button on remote (AC plug 🔌 icon) 8 times in 10 seconds. You will hear 4 tones Ding-ding-ding-ding. Power Limiter is always-on. Performing sequence again restores normal operation.

[@danw1955]

Pretty nice that they make a unit that is efficient enough to run directly off of your panels, and still cool a fair amount of space! I like the fact that they come pre-charged so you don't have to screw around with soldering lines, and vaccing down the system, and charging, and whatnot. That can literally take longer than installing the system in some cases! 😉

[@justxxcrystal]

This was the most helpful video. I live on the Gulf Coast. My son’s room gets full sun all day & I was looking for a way to cool just that side of the house without having a $600 electric bill monthly. Thank you!!!

[@TaddyDigest]

That's a very high electric bill. The mini split would be a great idea. You're welcome. Thank you for watching the video

[@dymarke]

Solar powered mimi split is not hard, even a battery powered split is easy enough. I converted my whole house HVAC to a mini split system that runs on solar and battery. You can power anything electrical with solar the only issue is having enough solar output. Ideally there really should be batteries in the system to stabilize the power output otherwise your split will cycle on and off with the sun or if grid tied it will cycle on and off the grid. Thank you for the video, keep up the good work.

[@zaccsacc5839]

I would like a video on that, I would appreciate saving on my electricity bill

[@SmitHVAC.]

Love these units! Glad to see you install one, I have a ton of info on my channel on these units, had mine for over a year now. I also have all the error codes and how to access the installer menu. Hit me up if you need anything!

[@MartyinPS]

Thanks for showing us how to install the EG4 Solar. I purchased one and waiting for it to arrive. I'm feeling pretty confident on installing after watching yours and a few other videos. You've all made it look pretty easy and straight forward. Thanks again. 🙂

[@TaddyDigest]

You're welcome, brother. I'm so glad you like the video. Thank you so much for watching

[@arathpm]

Thank you very much for sharing your installation, I liked the simplicity and clear way in which you explained the process. Additionally, you included details that only an experienced person has and learns with "hours of flight." You have my subscription, thank you and greetings from Guadalajara, Jalisco, Mexico. GRACIAS AMIGO!

[@TaddyDigest]

Gracias me amigo Thank you so much for your subscription. I appreciate you

[@kimmierodriguez]

BEST EVER Mini split installation guide I've seen!! I'm getting one ASAP!😊

[@TaddyDigest]

Right on bro remember the discount code Signature Solar Website signaturesolar.com/?ref=kvNaxADKBHncIq Use Code Taddy50 for $50.00 off your order over $500.00 Eco-Worthy Website www.eco-worthy.com/ Use Discount Code "Taddy30" for $30 off your order

[@sonnyshaw3962]

Good video. I'm a retired Mechanical Designer and tackled a lot of DYI home projects because I enjoy doing them. I have been thinking about solar A/C units because of the cost of Electricity in my area of the country and this sold me on the idea. It would have been nice if the costs of the unit and solar panel were included, but I guess you cannot have everything. Thanks infor Taddy!

[@TaddyDigest]

You're welcome. I'm so glad you like the video and i'm glad you watched it Keep on keeping on

[@joshuamorin2762]

This looks like an awesome way to cool my garage in the summer.

[@junior-hk2jt]

I always measure first the distance from the bracket to the line set/drain and it's always kind of a pain in the ass The way you do it bro so much easier thank you sir 👍

[@halledwardb]

Hey, thanks. Had never seen the mighty bracket before. My 15 yr daughter has been installing these things. I'll have to get her one.

[@TaddyDigest]

You teach your kids the right way. Thank you so much that's awesome

[@Annette-us8yc]

Wow!! The above the clouds views were incredible!! Really great videos!!

[@johnnyreb8030]

I have an Apartment over my garage 540 sq ft. I installed a Serville mini split from Amazon. Its quiet, sips power and will freeze ya out!!!!

[@Duhamal]

Great video. I am in Arizona and am seriously considering doing this for my kayak storage shed now. I wonder how well it would work but even keeping it in the 90s over full summer heat would be a bonus!

[@TaddyDigest]

Go for it!

[@Alex-yx4vd]

how wild is this kit! Never thought it would be efficient enough. Great demo and cool kit.

[@BSnydr]

This is exactly what I’ve been looking to buy. Excellent video

[@josecruz3237]

😂😂😂 I like the magic how you using your fingers un box the equipment 😂😂😂👍🫶🏻✅

[@TaddyDigest]

😆 😂

[@onefixitman]

You could install the panels as a overhang/lean to beside the building to create some shade to store items out of the sun. One 2x4 or 4x4 on each end with single 2x4 on edge between them and a ledger against the building for the other side. Use pressure treated. Or find some extruded aluminum. Set your proper angle and mount everything.

[@SWAFanPilot]

My dad is a startup commissioning engineer so I like watching HVAC videos for fun, lol. Mini splits are something we might look into for our house that has baseboard heaters so this video was quite informative.

[@TaddyDigest]

I hope this video helps. Thank you so much for watching

[@antoniobaez6282]

You can always put the PVC sleeve on the lines first before pushing the lines through the wall, saving you the time to go outside to readjust that PVC sleeve. Looks like a future grow shed... Put that remote control at one side of the door so that you dont have to walk all the way to the back to grab it.

[@ernestgalvan9037]

“Here we have our installation manual, this is super important” 😳😳🤯🤯 You Are Hired! Seriously, I get SO fed up with ‘I’m-Too-Macho-Man-Read-Mere-Instruction-Manuals” folks on KZbin , flinging the manual away, then stumbling through the work, trying desperately to figure out which way is up, is water wet, is ice cold, does the RED wire go to the#1 terminal, etc etc. Then they complain bitterly about “How difficult the install was” or “the product doesn’t work right” or “it burned up in less than an hour” It’s great to see an actual PROFESSIONAL HVAC installer look at the manual. not all units are identical, manufacturers can have slight differences in details. Thank you, Taddy Digest. New subscriber here.

[@TaddyDigest]

The manual should be your best friend. I agree. Why guess when you can know for sure. Thank you for being here

[@u812green7]

Real wrench would be better!

[@ecospider5]

I agree. When I buy something that has good instructions I usually look them up before I buy it. The instructions give you more insight into what you are buying.

[@ernestgalvan9037]

@@ecospider5 ..oh yeah, ‘available manuals’ are the greatest. Sadly, most of this has been locked away behind ‘patents’ or ‘copyright’ or ‘IP’ or ‘Consumer Safety”. Anyone else old enough to reminder those fantastic ‘Sam’s FotoFacts’??? I am also old enough to remember when Tandy/Radio Shack had “use/maintenance/repair” manuals for almost EVERYthing they sold. Good Old Days, indeed.

[@ecospider5]

In the 70’s when I was 6 I watched my dad build our first TV with a soldering iron. He an I did a lot of HealthKit. So many things back then included the wiring diagram inside the device. Those were the days.

[@iiinsaiii]

I have a shed that I power with solar and batteries. In the shed I have a full French door fridge and a upright freezer. It’s not insulated like yours, but I keep it cool during summer with an attic exhaust fan. I kid you not, that exhaust works wonders and everything is powered off of 6 deep cycle 100ah batteries wired in parallel.

[@TaddyDigest]

That is very cool. Where is your location

[@iiinsaiii]

@@TaddyDigestLong Island NY.

[@ecospider5]

That’s a great way to keep the shed the same temperature as outside. Definitely worth while.

[@sefaucon3839]

Very good and great video Quality of video , explanations , very clear images etc Great job !!!!!!!

[@virginiamolina1928]

I’m not looking to install this or anything but loved how you explained your how to & why.

[@TaddyDigest]

I'm so glad you enjoyed the video. Thank you so much for your wonderful compliment.

[@DIYJim-wx6hq]

Details on the drain hose are great. I wish the video was available before I installed my EG4.

[@matthosseini4194]

As always, you did a great job 👏 just two things first is based on my experience maybe it’s just me, so I never had a good experience with mini split in a foaming place and got leak very soon at indoor units due to VOC gas , second i believe that would be better to coil your line set horizontally in order to get back oil to the compressor. Thanks again for your awesome job and training 👏👏👏

[@TaddyDigest]

Great advice thank you brother

[@matthosseini4194]

@@TaddyDigest thank you 🙏

[@jumpout4660]

I just bought one with 10 panels to get free shipping what's the deal with the coils are they wrong should they be stretched out ?

[@noneyabeeswax3200]

I’ve got one sitting in my garage in a box that came a couple weeks ago it’s near the top of my todo list,very timely post

[@danpresson]

Great video that seems easy to install

[@TaddyDigest]

It was!

[@BoxTruckVagabond]

Great video. I'll definitely save this one for later when I install mine. Thanks for the thorough content.

[@TaddyDigest]

Your Welcome Thank You so much for watching

[@anthonygaunt8974]

Love your tuition very informative best I’m watched so far 😊

[@Ditchmanp]

Hey looks great nice video ! . I used tamarack rails on my Bus/Rv with 4x 320w trina panels and they can with stand hurricane winds. They are really nice product. You can have the rails out passed the roof so on your south face roof you should get 4 up there.

[@roycolancecco4744]

There is nothing more permanent than a temporary fix. I really hope you figure out a good solution for mounting those panels. Good luck man!

[@shawnmurphy8941]

My 3.6Kw, EV charger array as of last weekend, is also now running a pioneer 12k Btu, 23 SEER mini-split in my garage, effectively increasing our square footage by 400 feet. What surprised us was, whe we opened the garage door and left it open all day, it cut the houses electric use by 20Kw, while only using around 10-12Kw from the EV charger array. This may save us $600/year, and make our house almost net zero in electric use, with our grid tie 5.4Kw on roof installation. I didn't expect the garage to be as air tight as it apparently is. It does have an insulated door.

[@TaddyDigest]

Thank you for sharing your experience! It's inspiring to see how small changes can have a big impact on energy efficiency and savings.

[@robertbenavidez7164]

Pet peeve, Why do people always use channel locks on brand new brass fittings?....why can't they just use the proper wrench that fits those fittings? As a certified automotive technician? For 43 yrs. If I paid a professional to install a mini split? (A/C UNIT) and they started to tighten a brass fitting using channel lock pliers ??? I would fire them on the spot. (Use the right tools for the right job) plain and simple. 🤦🏻🤦🏻🤦🏻 Other than that? Great video & awesome information. Just take it as, constructive criticism.😊

[@TaddyDigest]

forgive my impatience

[@robertbenavidez7164]

@@TaddyDigest You can do what you want, I was just bitching about my pet peeves...😄🤣😂😉 like I said great video. 👍🏼

[@PanaLumberjack]

I was going to say the same thing, you beat me to it.

[@robertbenavidez7164]

@@PanaLumberjack Geniuses think alike ..🙂

[@dragonsballzie]

You both are like grannies😂

[@cruz47144]

Great video. Thanks for more insight

[@TaddyDigest]

Glad you enjoyed it!

[@SidebandSamurai]

Now that is a fantastic video. Thank you for showing this to us.

[@TaddyDigest]

You're welcome. Thank you so much for watching

[@larryhand7219]

I’m with you. I always use torxs screws and ditch the Phillips.

[@puntabachata]

You need a torque wrench to follow the manufacturer's spec. You also need to evacuate the lines with a vacuum pump and gauges to remove air and water vapor from the lines prior to releasing the freon. A nitrogen pressure test may be beyond many DIYers. So, hold the vacuum for at least 20 minutes. A few hours even better.

[@TaddyDigest]

If you watch the video, you will see that. I recommended a torque wrench in the video Also, if you read the manual for this specific model of equipment, you will know that a vacuum is not required

[@richardcrook2208]

If the line sets are full of air and not the ones that come precharged in the linset then yes you would need to use a vacuum pump to remove all the air and moisture from them before letting the freon go from the condenser..

[@estebanbaltierrez4549]

that line set is sealed and vacuumed, they have a valve that opens when you connect it.

[@johnlee7085]

Nice video. Love that it can be powered with three solar panels. Definitely appreciate the snap unboxing, as well as the pro-tip on the solo wall jacks. As for the solar mounting, a simple frame between waist and shoulder high would seem to ease installation and cleaning. You might also consider mounting the panels to 2x4’s that can pivot on a bolt with a leg on the other end that can adjust the inclination for summer, spring/fall, and winter. Like the back of some chaise lounge chairs. That way it’s an easy adjustment once a quarter to increase the efficiency of the panels.

[@johnlee7085]

Just went to the website. $2k to $3k seems pretty affordable for power and an HVAC system.

[@TaddyDigest]

Thank you for the tips brother

[@jolodejesus]

For Metal Roof/Walls or whatever... You need something like S-5 RibBracket IV - S5 company has all mounting types for direct attatch or rail based systems. - Used them on many projects and they are solid.

[@TaddyDigest]

Thank you for the knowledge, brother. I appreciate you

[@moleisrich1]

Will prose already installed this same unit. I think it’s great. I’m going to do my outer shop/garages. It gets up to 110 in there.

[@Emilthehun]

Ha! This is awesome! Definitely gonna look into it.

[@jeffvandagrif]

Off center? Vertical line set coil to trap oil? Channel locks on hex fittings? Always open liquid line first.

[@elinoreberkley1643]

Looks like something out of NASA. Amazing job!

[@everettsouthwood4737]

I have a good idea about mounting. Connect electrical wire first, push wire through hole taped to hose pipes while it’s on your shoulder then mount. No brackets needed.

[@barrettabney]

Loving your plywood walls. Having plywood on the walls makes mounting a piece of cake. You don't need studs to hold up the unit. Just be sure you don't hit the stud with your pass through.

[@Rusty6450]

Great information on the mini-split units. Would be nice to know if a battery backup is available for night time and cloudy days. Any suggestions how to install with a brick exterior? Thanks.

[@dagwood1327]

You might put composite material to build up to the rib height for you solar panel install. Then install your brackets. You can get it at most box stores. It is made from plastic and wood. They typically use it for decks.

[@pl747]

i was thinking about going with mini splits to replace my electric hungry central unit but I ended up going with inverter window units. Super super quiet and so easy to install I was up and running in 30 minutes. And a LOT less than the mini splits. My electric bill last summer was about $150 less per month in the summer. Only downside is no heat. But I use propane anyway.

[@TaddyDigest]

that's awesome. very cool 👍 What brand inverter window unit

[@pl747]

@@TaddyDigest midea

[@JustinMiales]

I would use a piece of weather tight conduit to cover everything off and seal it up completely

[@pcsof33]

Taddy you're always doing amazing work, greetings from Iraq ☺️

[@TaddyDigest]

Hey brother, i'm always excited to learn new things

[@pcsof33]

​​@@TaddyDigestGreat, but for me vacuuming is the soul of air conditioning system.

[@andrewdarbyshire9108]

Love the vid, I however like to be able to flair the connections to be able to cut the lines shorter and make it neat and tidy. I do the same on the drain lines, that hose won’t last long in the sunlight.

[@TaddyDigest]

If you want to make line shorter and you have a torch and a couple couplings, then you can make it shorter

[@mwreyf1]

Use the panels to make a roof off of the side of the shed. Just need to plant a few poles.

[@DIYJim-wx6hq]

Solar Pergola

[@squarefour1]

Well done. That is pretty amazing I must say. I want one

[@TaddyDigest]

Here is a discount code Signature Solar Website signaturesolar.com/?ref=kvNaxADKBHncIq Use Code Taddy50 for $50.00 off your order over $500.00

[@fredguldbrandsen2723]

Great Video! In NH I am curious about Winter Heating capabilities of this mini-split.

[@TaddyDigest]

I'll do an update video this winter

[@nigelhosein7822]

Hey very good installation what I do is spray some soapy water on the plug for the drain hole and it goes In easy .I am really interested in the solar ac units I think it's a game changer when it comes saving on electricity and your carbon footprint 14:39 15:37

[@chrisspychalski2376]

solar ac? should be DC from solar. if ac means air conditioner, it's a heat pump (solar HP) and can heat too.

[@LMo-bm6ol]

Why aren’t you a trade school professor? It’s so easy to learn from how you demonstrate all the install! Nice!

[@lestonthompson8495]

I know this won't mean much to alot of viewers, but an easy way to convert Cel to Far. Double the number and add 30. He was showing 16 cel. 16 +16+30 will put you in the ballpark.

[@lestonthompson8495]

@@BlackpowderBBQ Well good for you, then why is this AC in Cel.? I was just trying to give you an easy way to convert so you don't have to carry your laptop around with you all the time, to look up formulas. Actually your laptop was more than like made by countries that use the Metric system. Is BTU's and cubic Feet AMERICAN

[@irvingchies1626]

You can look up formulas on any phone with access to internet, also c° to f° is probably the easiest one, 32 F equals 0 C and then do each C by 1.8 to convert to F

[@lestonthompson8495]

@@irvingchies1626 Right, I got it. Why are you being a prick about this? I was just trying to give a quick easy way to get close to the conversion. Do you give people the correct time, right down to the sec if they ask you what time it is?

[@lestonthompson8495]

@@irvingchies1626 Have you ever had a real job where you aren't allowed to play with your phone all day? You ever had a job where the frequency of your phone might cause an expolsion, so your not allow to have it on you?

[@lestonthompson8495]

@@irvingchies1626 Do you know what Bar means on an air guage, without using a phone or your laptop, can you convert Bar to PSI, basic math you can do with a pencil and or in your head if you get in a bind, prick.

[@furris01]

Well explained,professional advice thanks.

[@USA-GreedyMenOfNoIntegrity]

Hey Taddy, hvac pro, 47kW pv not too far ne of you. Totally off grid. Running 2 ea 9k mini hp’s 31 & 30.5 seer. 2 ea 2 ton 20 & 16 seer and 1 es 1.5Ton 16 seer hp, 1 9K 23 seer hp in my work van with 1600W on roof😊. p/u 1 5/8 x 1 5/8 unistrut 40’ or so, prime/paint if you choose for rust prevention, bolted to roof using lag bolts, washers, winshield urethane or hvac silicone to seal and hold better/prevent rust/leaks, 3/8” spring nuts, 3/8” ss bolts 2.5” or so, large ss fender washers. 4 sets for one panel or if panels are side by side share hdwr. I use a large socket and a large punch to make washers “Belleville” or cupped. You need a 1 3/8” length (thickness of your frame) of gray 3/4” pvc or block of pt wood to go under washer if not holding another panel down. Tighten everything snug (not super tight to break glass) using anti seize on bolts to prevent galling.

[@azeemali7102]

Smart idea, hope to some day do this...

[@AAAPoolServices]

Great video easy to follow easy to understand we just installed the same unit in the garage everything went smoothly thanks to your video. Only minor problem we're encountering is understanding the different features of the remote can't figure out how to get to darn thing to run with auto cooling turning on and off at the desired temperature. I Do you know there are fan settings just there's no clear information in the manual with the icons mean. Going to users or anyone has any guidance on how to set this up what the different icons mean it would be appreciated. Other than that we love the unit it's working great. Make it a great day and thank you

[@PlumCrazyRob]

Do you have the Solar Aircon app running?? It's a bit easier to deal with and you can set schedules there.

[@redc8783]

I like this and can see where this can be something you could use in a pump or solar house to keep everything protected from the cold. Dose it come or can you hook up a battery back up for night time use.

[@edtaylor6431]

I would build a free standing lean to next to your shed and mount the solar panels on its roof.

[@theGadgetLab]

For the solar panel mounting on the shed, have you considered S-5! Protea Brackets? You might need an additional L foot depending on orientation of metal ridges. Hope that helps!

[@TaddyDigest]

Thank you that really helps

[@stephen6640]

Dude, I was hesitant on going this route but not any more. Thank you! BTW - You call the fittings "copper" but they are brass.

[@tallisman57]

I don't know why nobody ever talks about heat recovery/heat exchangers when dealing with Heat Pumps, I've been using one for close to 35 years and it's amazing,not gives me free hot water and ups my SEER eating as a bonus making the whole operation more efficient. The best part is you can use any old hot water heater you want... You could even run a DC powered pump or a 110/220v pump and it's only pennies to operate because it draws somewhere in the order of less than 0.5 amps... I'd like to see these DIY units add two extra quick connectors in the proper place to allow for the hook up of a heat exchangers... I mean you could just Mount it on the return line but it's best between the compressor and the reversing valve... When they switched over to the new refrigerant everybody doubted it would be much of an advantage, but truth be told, it's even better than it was with the old refrigerant!!! The water is even hotter than ever!!! And if you buy the parts yourself and install it yourself it pays for itself in no time at all which is why many AC techs use to jack their prices up because nobody ever believes you when you say it pays for itself in six months if you consume a lot of hot water.... Mine runs year round down here in Florida... Summer and Winter... With the exception of a few days when it gets really cold and I need to use auxiliary heat.

[@TaddyDigest]

Can you provide me with a link to show me what you're talking about

[@raj-ze2cm]

what is the amount of watt panel? How long service duration provide it?

[@alvarogaitan2529]

terrific job my friend thanks fantastic video

[@dandahermitseals5582]

Great demo Dandahermit.

[@ciskolse-forty699]

I need this for my garage for the AZ heat

[@TheHeriberto]

You shall open the smaller service valve first. The bigger one has a small purge valve for any air that has come in.

[@improvisedsurvival5967]

Cool didn’t know they made solar mini splits .

[@michaelmcclure126]

Just extend the width of the frame the solar is gonna sit on…use some “pipe or electrical strut” to create a frame that extends past the roof line so you can have all those panels sit above the roof(up and out of the way… Plus if you add More panels and split your lines for the solar to an inverter with batteries you can supplement the power throughout the year for that building when the ac is not in use

[@panagiotisharos9625]

Congratulations.. regards from Athens Greece 😊

[@TaddyDigest]

Thank you! 😃

[@Mlo713]

This would’ve worked great here in Houston Tx. My family and I were without power for four days. There’s still people without power going on 7 days. 😢

[@sh839c]

So were the fittings leaking at the outdoor unit?.

[@dannymoreno03]

Excellent video 👌👌💯

[@Syrptoh]

was just thinking this today we are reaching breaking record heats but still use the same old ac by 2040 i predict every house will have a solar panel

[@sciglassblower]

I bet you punched a hole in the drain plug LOL. I love the way you read instructions and attached the wires into the Head unit before instillation LOL. And your hole was just perfect showing below the unit LOL. Don't worry about the metal screws leaking behind the bracket LOL. Don't worry about the rain getting in the exterior hole where the silicone did not get and be sure not to cap it with a rain protector either LOL.

[@TaddyDigest]

lol 😆 😂 🤣

[@TaddyDigest]

Thanks for watching the videos

[@juanhyepiz]

Hi, I'll recomend to install a shade where the panels are set at the side in the video and you will add a shade and used the panels as the roof of the shade structure

[@TaddyDigest]

Great recommendation thank you brother

[@lisanotherdayolder2824]

I want to know what you used to insulate your shed? Looks interesting and very efficient. I have been researching something other than blown in fibers or rolled batt for my walls so I can be ready when I do get solar AC.

[@TaddyDigest]

It's a kit you can get at spray man I'm pretty sure i've got a video about it Do a quick search of how to insulate a shed with spray foam taddy Digest

[@ElPasoTom]

Good stuff thanks. I want to use this for my solar power and battery shed which coincidentally will contain EG4 LL batteries. Mainly interested in keeping everything at 55 deg or above in the winter. Thanks for the video.

[@westonlee9778]

Howdy interesting could you use a battery pack to charge up from the Solar Panel in order to power the Mini split?

[@TaddyDigest]

No Solar panels wire directly into the outdoor unit Check out my video to learn how it works at night

[@westonlee9778]

Tks for quick reply.

[@TaddyDigest]

If YOU want to learn how the Solar powered AC unit works at NIGHT 🌙 Check out this Video. kzbin.info/www/bejne/ppu2o6R6o6p0os0

[@dirtyharry5878]

Good job on the video bro. As far as your panels, have you thought of setting them in a remote location and make the adjustable as to the season? That would work well as the sun sets lower in winter. Good luck and thx

[@TaddyDigest]

Thanks for the tip

[@__alejandro__frias3751]

Great job ! I have a question ! What happens at night , still running ?

[@TaddyDigest]

Unit automatically switches over to AC. Power

[@yogi_5150]

Build a lean-to to mount the solar panels and keep things slightly protected

[@dailyfirnews9409]

Good job