Cooler Master Masterplus+ Software Review

First part 👉 • Cooler Master aRGB/RGB... 🔴In this video Kosher takes a deep look into the Cooler Master Masterplus software VS Razer chroma synapse Which is better?
🔴 • Razer Chroma aRGB Hub ... - Razer Chroma
🔴 • Cooler Master MasterFa... - MasterFan MF120 Halo
🔴 • Cooler Master SickleFl... - SickleFlow aRGB Fans
🔴 • High Airflow Case. Mon... - Montech X3 Case Review
Where To Buy:👇
🟢amzn.to/3jlgAdK - Cooler Master ARGB Controller
🟢amzn.to/3jkFOJ1 - Razer Chroma
🟢amzn.to/2WstHRc - CoolerMaster MF120 Halo
Timestamps:
00:00 Correcting Myself
2:30 Into The Software
3:24 RGB VS aRGB Software
8:50 Software Hiccup
9:09 Individual LED Colors
13:41 Lighting Maker Tool
16:18 Should U Buy?
_________________________________________________________
Hit me up @
Discord: / discord
Instagram: / koshertechmedia
Twitter: / koshertechmedia
Facebook: / koshertechmedia
Twitch: / koshertech
_________________________________________________________
*I Graduated From KZbin University*🤣🤣🤣
__________________________________________________________
Music by - epidemicsound.com

[@nickster7686]

am i the only one who prefers the coolermaster fans over corsair fans?

[@mudvayna]

Corsair effects and software are great. This looks good. Donwside of both need a controller$$$ to the full experience

[@oriolprats1114]

Why doesn't Masterplus+ save my color settings and every time I turn on the PC do I have to go to the program to activate it?

[@yoannbranz8147]

Traduire du texte avec votre appareil photo hi, did you find a solution? I've been in the same situation as you for a long time. THANKS

[@oriolprats1114]

@@yoannbranz8147 it's AIO fault, it doesn't work and Cooler Master replaced for a new one

[@MathewAguayo2023]

Does the software allow you to turn off the main leds in the fan and keep the outer ring leds on?

[@kirangadge911]

Yes you can under Custom

[@bevanoneill4532]

Are all these fans connected to this one controller? Daisy chained?

[@probtc10]

Can ı add led strip on it ? Like my lian li 24pin cable ? And witch one is better for u razer or coler ?

[@aravindraja8034]

Can you control other bran fans with this controller does it allow individual led control and brightness like the A1 controller for other branded fans like CF120 and CF120 Plus?

[@brrebrresen1367]

find it interesting that CM is 60$ over in the US while the Razer is like 40$ but over here the CM is 40$ (with VAT) and the Razer is 100$ (w.VAT)

[@chaitanyachaing9223]

I just wanna confirm before buying: My Mobo (asus b450 gaming plus) doesn't have an argb header but my fans (coolermaster sickleflow 120) are argb and they r connected to a mini controller powered by sata. Now if I want to control these lightings through my Mobo, can I do that using this argb controller since it has that usb connection from controller to mobo? Plz reply

[@davidmacon1138]

I have everything up and working, no issues, and masterplus doesn't recognize any devices. I have mf 120's. and only two of them. The software for some reason is refusing to do anything useful

[@jeffreydiaz9500]

Hello Sir? Does the controller itself can detect a Non-Cooler master ARGB fan or any model?

[@EcksGamer]

So i would like to know do i really need that hub for that software to work because i am looking at "Cooler Master SickleFlow 120 V2 ARGB White Edition" on amazon to buy since i am trying to make my build a little more on the white side and the thing is the fans from what i can see only does a daisy chain for the ARGB headers. Also would like to know if it might work with other fans because while i would have 6 of those white fans i am planning to keep using my Deepcool CF 120's for the top of the case and also using the ASRock software cause i am using a ASRock board as well which is alright but the music settings i have pretty much sucks so um ya.

[@joeldiaz3449]

Lightning maker back? thinked that this was removed 2 years ago

[@RichardSparks1970]

I have an MM831 mouse that used to work with software, the mouse got replaced under warranty, now every time I boot the software, weather my mouse is connected wirelessly or via USB, it says there is not compatible device. Even on their website, under compatible devices my mouse does not show up. WTF is wrong with Cooler Master?

[@_Medeiros7]

To be able to use this software and use these effects is it necessary to have this argb controller? if so where did you buy it and what model?

[@androidgamerz6506]

MF 120 argb kit

[@echeese63]

See? Told you it had some cool features 👍👍

[@KosherTech]

Lol appreciate that 💯

[@sijedevos2376]

I had mf120 halo but two died in a couple months time and after rma new fan pack was more yellow ish when set go white compared to the older fan pack. Switched to ll120 but I can count the individual leds and it’s looks cheap and bad. Any suggestion for fans that look good if set to white. Asiahorse ones looks good but not available for me. I don’t have argb header on mobo and will only use white because it suits my build.

[@KosherTech]

I have an entire playlist of aRGB fans check it out. It will make things easier.

[@mikheim4040]

​@@KosherTech hello what is the best controller for you? can you make a review of the cooler master a1 gen 2 led controller? can you connect 4 mf120 fans halo in one port?

[@twixxtro]

does this work when you connect the fans on a splinter?

[@bloomzzy]

says no compatible devices but when i went to the website it says its compatible but wont work

[@OrangeMSN]

Hello! Great video, have me a lot of hope ^^ Q: Is the controller connected to the 3-pin aRGB header or to the USB header in order to be detected by the Master Plus software?

[@Marcos-7611]

Hi , I was using Masterplus without problems ,but now it doesn't work anymore , I have reinstalled the software but it doesn' change colour ,it is stuck on the rainbow colors ! Can you advise me something to do ? thank you

[@bevanoneill4532]

Or did u use an rgb splitter cable for one power plug in that can hold 3 fans?

[@gmr9701]

Apparently I must have connected something wrong because for the life of me I cant configure individual effects for the fans and I cannot choose colors in the slider like you do here, whats wrong?

[@Chris.Cliver]

Hey man thanks for the informative video. I was wondering if you could explain or investigate if the masterplus software will allow you to configure non cooler master devices such as other fan brands or led strips. Like can you add select a custom device for each channel on the controller and tell it like this one is a fan (circle) with 24 LEDs, or this one is a led strip with 40 LEDs.

[@RameezRazaRiaz99]

Yeah I need to know that as well.

[@TheRaspaCalos]

i bought this recently and it does with my msi coolerliquid 360r. it is very late now but it might be useful for someone in the future. the custom argb diagram doesnt match perfectly but by trial and error (not much effort) it does the job well

[@kfs439]

@@TheRaspaCalos and it helped, thanks

[@aravindraja8034]

Please compare with CoolerMarster ARGB A1 controller will this one of the upgraded A1 work with Deepcool CF12Plus and CF120 fans and the Deepcool L360 ARGB and will it let your control individual LEDs? Can you control other brand fans and control the brightness and control every single individual LED on the fans? Can you use the controller you have on a mobo that does not have any ARGB/RGB header like my Asus Prime H410M-E?

[@Vallenatoal100porciento]

Hello, I want to buy a speaker and I would like to see a vs between MIATONE XBOX VS WKING X10 🙏🏻 I have those two options.

[@ferriscor]

unfortunate that the profiles dont work

[@joeldiaz3449]

Lightning maker works for rgb? I will buy a hyper 212 and I want a cycle of light blue and pink.

[@CommanderOoga]

Is it possible to turn off the rgb halo ring off and leave the main fan rgb on with the software?

[@MrBifallo]

guys why the cooler+ is not work?

[@airsound5]

Hi, is there an option to enable only the ring light without inner light?

[@Mintor94]

Based from what I see at 5:16 or 6:31 for example, you can. The inner and outer rings are adressed separately. He even sets colours individually for each led a bit later, so if you figure out which ones are for the inner ring, you just set them to black

[@ezbesst117]

yes, just set the three values for Red Green and Blue to 0 , 0 ,0 and set as custom color. This is off.

[@emrecannar7040]

Thank you for this video 😍

[@thelespauldude3283]

I wish it would apply the effects on startup

[@propstoyou9792]

i have a question, the profile i configured does not auto apply every time i boot up the pc, any solution to this?

[@laelizakiatussholekah9710]

what case is thay? please

[@fezfez3934]

can you set the inner leds and outer leads to different colours?

[@jack_sparrow1049]

yes. i did and it works

[@froyplayz1655]

Hi Goodday have you encounter like masterplus is not opening or stop working

[@romandulce999]

Can I select the "Chase" effect that I have with my AMD Wraith Prism CPU cooler (it's also from cooler master) ?

[@-Tropico]

Hi can we turn off the central rgb and turn on the ring rgb

[@hridaygauba7233]

Does it also work with other brand fans like deepcool ?

[@zoran.k5808]

is it compatible with gigabyte aorus motherboards ?

[@wisenpie9651]

is it possible for the ring fan and the center fan to go different rgb mode? For example the ring fan is in rainbow mode and the center is in cycle mode?

[@jaystol7988]

this is what i want to know

[@syafiqsyaf0587]

Yo bro .. how do you synchronized the casing fan with the cooler fan together .. i installed all of them but it didn't sync .. help me please 😅

[@hard_tech]

Olá, friend, is it possible to control the speed of two fans through Masterplus?

[@math001]

Hey man, do the fans retain their colors even after closing the software (kill all .exe and services)? Just confirming this works similar to software like NZXT CAM before I buy their controller. I like to run my system really clean so I close all the RGB software after they are done initializing the colors. Currently using OpenRGB to control my fans motherboard logo, fans, RAM ARGB but it looks to be potentially very dangerous for the system the more I read about it. So far I have found my RAM's RGB software to be decent & the logo being rainbow I can live with it. Only problem are the fans

[@MathewAguayo2023]

wait how could it be dangerous for your computer?

[@math001]

@@MathewAguayo2023 it's been a while but if I'm remembering it right OpenRGB is incompatible with some motherboards that can cause it to brick. I think it's because it is messing with memory values so deep in the hardware each time it changes the colors. Not everything is compatible with OpenRGB back when I posted it so you might have some issues depending on your hardware. Might be a good idea to check if everything is compatible before even downloading the software. Probably the same reason why some GSkill RAM sticks broke because of their RGB software.

[@MathewAguayo2023]

@@math001 oh wow. Very weird to mess with memory values when changing the colors

[@kinddragon313]

Doesn't this light control software have a music sync mode?

[@dharkbizkit]

damn. i almost bought the chroma, because i stopped your other video after you said "you cant controll it via software" and closed the video after that. so i have the same fans and what ive seen here in the video, its NOT possible, to make the ring white but the fans blue for example? the ring and fans, will always share the same color? thats disappointing

[@luxancap]

What case is that one?

[@JetSetGameQuest]

i am facing issues updating firmware on the same lol

[@Dissuasore]

Can you please tell me which option have you choose at 8:59?

[@litOdeMenezes]

Nice Kosh!! There you go!!

[@KosherTech]

BRAH if I F up I needs to fix it 😊 appreciate the feedback 💯

[@aravindraja8034]

Can you please do a review on CoolerMaster ARGB Controller vs CoolerMaster ARGB Controller A1 and let me know if both will worth other branded AIOs and fans and allow Individual LED control and Brightness control Note: Found that the old CoolerMaster ARGB Controller allows other branded AIO and fans to control lighting but no idea about individual LED and brightness Found the new CoolerMaster ARGB Controller A1 allows control of individual devices even if they are daisy chained but not sure if it will work with other brands

[@MrPrboricua15]

Is the remote necessary?

[@madhawaekanayake849]

Hey, does this software have Audio sync effect?

[@KRi3GERGaming]

Can I use non cooler master fan in this?

[@jinbo5867]

after downloading the software, my sensitivity felt a bit different.

[@UzairAli001]

14:30 So how do I apply those effect?

[@aravindraja8034]

my motherboard don't have RGB/ARGB header will it still work?

[@Kiryu_Kazuma96]

Yes the leds are controlled by CM controller which then connects to a usb header on the mobo

[@aravindraja8034]

@@Kiryu_Kazuma96 thank you for the response

[@FudgeEyeNah_]

do i need to use controller to use the coolermaster plus?

[@GhastK]

Yes i am pretty sure

[@RameezRazaRiaz99]

In India cooler master is $20 and razer is $50.

[@UFR00lz]

Do you know if it is possible to have the center color different from the ring color through the CM controller and software? Like in this video: kzbin.info/www/bejne/Z3evhpyYfcSnbJY - this effect was done in iCue

[@UFR00lz]

Found the answer. With the A1 controller from CM it is possible

[@jaystol7988]

@@UFR00lz so you mean like the AMD wraith prism? my prism outer ring LED's i can make it a certain color, but i can also make my fan LED's a different color than the ring LED's. i was hoping to do that with the cooler master masterfans if i get them, so that they look like my wraith prism. the outer rings on the masterfans are almost as thin as my prism outer rings, which would match better than the corsair ll120's i have.

[@RANTCANT]

I hate this software down to the fact every single time I've launched it I've had to update it.... makes it a 1/10 in my books

[@giuseppecipriani9795]

"no compatible device detected". this software is fake news.

[@aravindraja8034]

I have a DEEPCOOL GAMMAXX L360 ARGB AIO which came with 3X CF120 fans(The ones without holo ring) and planning to get 3 more CF120 Plus fans(The ones with holo ring) will the lights in the pump and all these fans be controlled using Cooler Master MasterPlus Software if I purchase and use the Cooler Master ARGB Controller or Cooler Master ARGB Controller A1? 1. Found that the old Cooler Master ARGB Controller allows other branded AIO and fans to control lighting but no idea about individual LED and brightness. kzbin.info/www/bejne/ZpTPm5qtoMqZl5o 2. Found the new Cooler Master ARGB Controller A1 allows control of individual devices even if they are daisy chained(landing.coolermaster.com/pages/addressable-gen-2-rgb-led-controller/) but not sure if it will work with other brands kzbin.info/www/bejne/pKSoeaiDdqmkiZY Will the old Cooler Master ARGB Controller will support brightness control and Individual LED control for other branded fans? Will the new Cooler Master ARGB Controller A1 will support other brand fans(like the old one) and let us control everything(Individual LED control, brightness control and recognize multiple fans connected to a single port using a hub/splitter cable)

[@twixxtro]

does this work when you connect the fans on a splinter?