Super Genius Idea That Should Be Patented

[@markseibert6369]

Not sure I would build this tool, but amazing to finally see someone on KZbin that actually paid attention in metal shop! Vacuum's up chips instead of blowing them all over the machine and shop, breaks all sharp edges and tightens up all three jaws on the chuck? Color me gratified!

[@CoolIdeasDIY-qv1nz]

Thank you very much for watching and welcome my friend🙂

[@batbayarbatsukh6393]

получаю удовольствие от твоей работы

[@ПростыеВкусныеРецепты]

Awesome workshop, the work is philegrantly done, good luck my friend👍

[@CoolIdeasDIY-qv1nz]

Thank you, my friend!

[@paulclairethomas1344]

Nice to know manual skills are not dead. Nice video, thanks.

[@CoolIdeasDIY-qv1nz]

Thank you very much for watching and welcome my friend!

[@P-hatornosoldafresa]

Mestre , muito show seus projetos 👏🏻

[@CoolIdeasDIY-qv1nz]

Thank you and welcome my friend😉

[@professionalgroup-gs4il]

Good work my friend!👍

[@CoolIdeasDIY-qv1nz]

Thank you so much!

[@jbohman9792]

Nice work as usual and great tips, what are you using for material?

[@CoolIdeasDIY-qv1nz]

I use Steel 45! Thank you very much for watching and welcome!

[@wagnersoloviow8443]

Sergey vc precisa ser estudado pela NASA;que maravilha de ferramenta,parabéns!

[@CoolIdeasDIY-qv1nz]

Thank you very much for watching and welcome my friend🙂

[@samuelcruz9258]

Mas que ver el producto...me fascina el uso del torno y sus variaciones.

[@CoolIdeasDIY-qv1nz]

Thank you very much for watching and welcome my friend🙂

[@Muchirisimon]

The precision ❤❤

[@CoolIdeasDIY-qv1nz]

Thank you very much for watching and welcome my friend🙂

[@cmcc1971]

Nice job. Subscribed.

[@odin823]

I would say by the wobble the two are not concentric. next time put the whole assembly in the lathe when you make it. It may save you some broken endmills in the future. especially if you want to put a somthing tiny in there. Happy machining.

[@foxwhiskey]

Usefull toolholder ! Nicely done. Congrats, bro ! 😊

[@CoolIdeasDIY-qv1nz]

Thank you and welcome!

[@Latheworks-h2n]

Nice work brother 👍👍👍

[@CoolIdeasDIY-qv1nz]

Thank you very much for watching and welcome my friend🙂

[@nathkrupa3463]

Great idea 😊

[@CoolIdeasDIY-qv1nz]

Thank you and welcome my friend

[@gottmituns3225]

Happy New Year first and for the MAN who operates the lathe i want to tell that i really love and appreciate your skills, hat off to you sir❗️ We watch your videos with much interest, we love your work A LOT...

[@CoolIdeasDIY-qv1nz]

Happy New Year my friend! Thank you very much for watching and welcome!

[@MirzaShafiq-j2o]

❤MASHA.ALLAH.GOOD.WORK❤❤❤❤❤

[@CoolIdeasDIY-qv1nz]

Thank you very much for watching and welcome my friend!

[@nicholasgloc8555]

Check the runout with a DTI on the end of the end mill it looks like it`s about .015"/.4mm

[@CoolIdeasDIY-qv1nz]

Welcome!

[@birdman5jh]

Definitely runout. If all the taper setup was is going by the angle scale on the machine then I’d bet the taper isn’t very close to the collet spec. It’ll do for what he does I’d guess. Also, not the first person to ever make one.

[@wk7060]

You must have graduated eyes.

[@александрпетров-ь9в6п]

@@birdman5jh просто надо точить конус и посадку за одну установку

[@diannek4994]

nice work on all the things i have seen !

[@CoolIdeasDIY-qv1nz]

👍👍👍👍👍

[@Alejandromundial.]

Well done my friend 👍

[@CoolIdeasDIY-qv1nz]

Thank you and welcome to my channel!

[@jbproduction8703]

Perfect ✌️

[@CoolIdeasDIY-qv1nz]

Hello my friend, welcome to my channel!

[@ypaulbrown]

Well done my Friend…❤❤❤❤

[@CoolIdeasDIY-qv1nz]

Thank you and welcome my friend!

[@frankf.marcus7768]

It's nice and compact. It's nice if you are pressed for space on a tiny mill when doing tool changes or not enough Z like on my hobby mill. I can see it.

[@jklmnop8607]

Why on earth do you use a threading insert for turning an OD.?

[@johnn.eropkin9895]

Nice equipment.

[@metallantik]

Well done bro ❤

[@CoolIdeasDIY-qv1nz]

Thank you very much for watching and welcome!

[@fabiomorassi9974]

Top!

[@CoolIdeasDIY-qv1nz]

👍👍👍👍👍👍👍

[@lajosvozarik3747]

Az ötlet kiváló! :) Valószínűleg csak durvább munkákhoz alkalmazható, mert az adapter túlságosan hosszú, másrészt a kétoldali esztergálás miatt nagy lesz a maró radiális ütése (több, mint az edzett, köszörült, 42CrMo anyagból vásárolható terméké). a 3-4 mm-es hosszlyukmaró csak erősen csökkentett előtolással marad életben.

[@alessandroandrenacci2372]

Happy new year ...

[@CoolIdeasDIY-qv1nz]

Thank you very much for watching and welcome! Happy new year!

[@PedroAlbertoHernandez]

como me gustaria saber manejar esas herramientas y maquinas amo los fierros

[@wk7060]

It could be handy on my mill that has limited travel.

[@CoolIdeasDIY-qv1nz]

Thank you very much for watching and welcome my friend!

[@meddlehedd1194]

nice work

[@CoolIdeasDIY-qv1nz]

Thank you very much for watching and welcome my friend!

[@dagorithe]

For those who did not get it, I’m sorry. He made an adapter to fit the R8 shank so he could use ER32 collets. A shared tool..

[@CoolIdeasDIY-qv1nz]

That's right my friend! Thank you very much for watching and welcome my friend!

[@ammagato]

Non avevo dubbi, fai solo cose ottime, buon anno!

[@CoolIdeasDIY-qv1nz]

Thank you very much for watching and welcome my friend🙂

[@johnmignano7872]

Awesome product however may not be able to get patent because of public disclosure it is considered prior art 👍👍👍🙏

[@wilhelmvonn9619]

True. Once an invention/design/whatever is in the public domain it can't be patented.

[@CoolIdeasDIY-qv1nz]

Thank you, my friend!

[@chapman9230]

You beat me to it. I am a patent attorney.

[@viva1911]

👍👍👍👍👍👍👍

[@CoolIdeasDIY-qv1nz]

Hello my friend, welcome to my channel!

[@rasoulfarhadieh5785]

Exellent

[@jyvben1520]

excellent

[@CoolIdeasDIY-qv1nz]

Thank you, my friend!

[@CoolIdeasDIY-qv1nz]

@@jyvben1520 Thank you, my friend!

[@muhibcomertel1281]

her zaman güzel işler

[@CoolIdeasDIY-qv1nz]

Thank you very much for watching and welcome my friend!

[@odin823]

For christmas sake, clean those damn drill bits. It would drive me nuts to use a drill with rust on it.

[@takedeadaim8671]

What’s the runout when you switch to the endmill/ er collet. I guess I’m not sure what the benefit is.

[@fredmitchel1236]

Ah...ER collet holder. And shell mill Little long stick out You are a great machinist I may just buy Haas Old school dog hear I need one for my 8 x 36 Sheldon Good job

[@pbysome]

My collet chuck and shell mill have their own arbours do i dont teally see the point.

[@helmutschelle1676]

Mit welcher Stahlsorte erreicht man so eine glänzende Oberfläche beim Drehen ? Großes Lob für die Sauberkeit in der Werkstatt und der Maschinen.

[@VincentPochet-c9d]

hello can we turn a metal drill bit into a strawberry? if so could we see it on video please thank you

[@CoolIdeasDIY-qv1nz]

Welcome

[@bobsbillets]

Those spindle bearings sound aweful when you spun it by hand with the indicator on the material.

[@CoolIdeasDIY-qv1nz]

It's not the bearings, it's the gears, as I'm spinning at speed, not neutral! Thank you very much for watching and welcome my friend!

[@frankf.marcus7768]

I've been designing machines for 47 years. Patents are almost useless these days. It takes a $million to defend a patent therefore whatever you have must make multi millions to even justify a patent, and even when the patent is challenged and resolution is reached nothing happens. Utility patents are skirted around by the slightest redesign. I'm not really sure what's patentable here, any unique feature is easily skirted. If you patent it yourself and do all the work yourself then it is probably worth it, but good luck enforcing it.

[@KD-ss7rf]

I think I’ll go buy a 150,000.00 dollars worth of shop equipment so I can make one😂😂

[@watchdogu.s.a.8973]

😂 Yeah... because without a doubt that is the exact and only reason he has a fully equipped shop. He did it JUST to make that collet/adapter.

[@jacquesjuan6815]

Les porte-outils à pince comme celui-ci existent depuis plus d'un siècle et si sa fabrication est bien excutée telle que sur cette vidéo il n'en est pas moins un outillage ordinaire en fabrication mécanique/ usinage , utilisé depuis très longtemps dans la majorité des ateliers et usines .

[@jarwik]

güzel ama boy uzamış. buda çok sert kesimlerde zorlar biraz.

[@CoolIdeasDIY-qv1nz]

Welcome!

[@DIY-xx1dv]

🎉🎉🎉🎉🎉🎉🎉

[@CoolIdeasDIY-qv1nz]

Thank you!

[@papalevies]

They already sell ER to Morse taper collets

[@JiriUryc]

Na frézování se to moc nehodí. Je to příliš dlouhé. Nechápu naco je to dobrý.

[@musap6660]

o parçayı yaparken uzun uzun firezeleme işlemi gösteriyorsun neden yaptığın parçayla fireze işlemi yapıp göstermiyorsun işe yarayıp yaramadığını senin el hareketlerindenmi görecez yaptığın parçayı birkezde olsa deneyip göstermen gerekiyordu ?

[@CoolIdeasDIY-qv1nz]

Welcome!

[@iiredeyeiiredeye1569]

Respect for the effort...but I'm really not getting this. Completely unnecessary tool. Thanks for the content though.

[@CoolIdeasDIY-qv1nz]

Thank you very much for watching and welcome my friend🙂

[@necattornac7774]

İsten anlamayanlar icin muthis bir is anlayanlar icin cok siradan 😂

[@marekstypczynski2522]

mam warsztat sam dorabiam podobne redukcję do frezarki i tokarki od lat Z całym szacunkiem za fach dla Pana ale bicie powyżej 0,01 mm uważam za ryzykowne

[@aj7utu]

I don’t know. He spent 1-1/2 hrs making an ER collet holder in a 3-jaw chuck. Probably with .002in runout at the tool. But if he bought this quality tool from China for $9, he’d probably be dissatisfied.

[@brianjones3439]

You can't patent anything that is the public domain, so publishing this prevents it being patented.

[@hansmichael7013]

Thats correct. If you want to get a patent, dont publish it. File a patent application.

[@peti1948]

What is new's?

[@stanstead560]

I can buy an er collet chuck balanced to 12000 rpm for 25 quid

[@gtavxelidze]

The tool has a lot of runout and less rigidity, because you made it very long

[@CoolIdeasDIY-qv1nz]

Welcome!

[@100ampscurrent]

It's made not for tool. He made it just for video and monetize from KZbin.😊😊

[@ButchBerry-e7g]

Ya gotta love all these armchair machinist commenters !

[@LOOKATTHISRAFFF]

Frez ma bicie kolego :(

[@CoolIdeasDIY-qv1nz]

Welcome!

[@MarcinREPART]

Fakt. Choć koncepcja jest ciekawa

[@CoolIdeasDIY-qv1nz]

@@MarcinREPART Welcome!

[@MehmetaliAkbuga]

Yapılan malafa burcunun boyu fazla vibrasyon titreşim yapar yüke fazla talaşa gelmez

[@VK-yg8fu]

Sowas gibt's auch fertig zu kaufen...

[@ianlangley987]

I am sure its a good idea but it will chatter like a you know what. Good luck.

[@CoolIdeasDIY-qv1nz]

Thank you very much for watching and welcome my friend!

[@RM-fj6ro]

🐕👍

[@CoolIdeasDIY-qv1nz]

Thank you and welcome to my channel!

[@teddrosenthal]

Are you wearing your pajama pants?

[@CoolIdeasDIY-qv1nz]

That's right.Thank you very much for watching and welcome my friend!

[@vandalsgarage]

I can sometimes be found in my shop late at night in my red plaid pajama pants and crocs. First time I saw one of your vids, I laughed out loud. The safety police can have a moan about it, I don't care.

[@gistem6005]

En mécanique, on dit " ça tourne comme une patate " pour info, un porte pince en CM3, ça se trouve dans le commerce, c'est cémenté et ça tourne rond.😉🍻

[@CoolIdeasDIY-qv1nz]

Thank you very much for watching and welcome my friend!

[@jguadalupegonzalezguajardo3883]

No veo por que deba patentarse, es un simple "sopolpe" como cualquier otro