Could this Turbo MOON BUGGY be the MEANEST Farm Recovery Truck on the PLANET?

In this video, I give this rare and unique tracked dump truck a once over before I see how will it start and how it drives on wet slippery ground, in anticipation of it being put back to work. This machine is fitted with a powerful Mitsubishi Turbo Diesel Truck engine and is operated via a fully hydraulic transmission and drive system, with massive 900mm tracks. It has very low ground pressure, possibly making it the ultimate recovery truck on tracks. Thanks for watching.

[@fzr400rr100]

Bit of a spruce up (or Bruce up) and that old girl could still earn anyone a living today, absolutely fantastic. Well done.

[@bruceinaus]

Yes a few commenters have mentioned they know of these still reliably working

[@Golden-dog88]

just a coat of paint once sir Bruce is done n she’ll b right

[@kymmarshall1116]

Bruce I noticed that you are very thorough when you’re working and especially with battery terminals. That’s a good lesson to be learned.

[@bruceinaus]

Thanks Kym

[@Watchyn_Yarwood]

And I thought I was fanatical about battery terminals! Bruce is the master.

[@nhraandnascarfanatic5907]

What I like and appreciate is your attention to detail and going that extra step, little things like battery terminals, a simple fluid check, fuel treatment etc goes a long way… guys like you really open peoples eyes as to just how much of a giant waste land this world is, leaving these handy timeless classics left to rot all because of simple problems. Good on you Bruce!

[@vaitonl314]

Almost daily uploads of Bruce? Finally some quality content to look forward to nowadays. Great work fellas.

[@bruceinaus]

thanks very much for that

[@Rocco10104]

A vehicle recovery mission from the Moon Buggy would be an epic video!

[@bruceinaus]

Thanks for that see how I go

[@TerryLawrence001]

That machine with a boom for lifting and towing would be the ultimate rescue rig!

[@bruceinaus]

I agree Terry, thanks for the feedback

[@boostbogan]

The M113 ARVL (Armoured Recovery Vehicle Light) is exactly what you're talking about

[@aorchotika]

That thing is cool!! Bruce you're a legend

[@bruceinaus]

thank you for the kind words

[@CampbellSimpson]

Rubber tracks! And a diesel that started on the first compression... What a rare treat 😂

[@bruceinaus]

Thanks Campbell

[@Watchyn_Yarwood]

That had to be the fastest first start of an old machine I've seen on YT!

[@johnnyonnotice]

Hi Bruce yes a rescue is just about what aught to be next I’d say. Great work keep it up. Love the explanations about tools and mechanical methods you’ve used throughout your career. The young people who watch will definitely learn a lot from you. Even l who once had my own diesel repair business learn or relearn things you show. Thanks.

[@bruceinaus]

thanks for your kind words

[@benwaycool7625]

Hi Bruce, big thanks for all your time and videos. Nice to see some machines and references to shops from where I’m from. Not often I hear anyone talking about Bundy and Hervey Bay manufacturers haha. Also I used your grease on a screwdriver trick to pick dirt from a mud wasp nest out of a transfer case the other day - lifesaver.

[@bruceinaus]

Thanks very much Ben, there are some really skilled people in wide bay

[@trevorzealley729]

I did have a Morooka MST 600 I used for dam clean outs . It was awesome . Also a handy easy addition was that I welded a box receiver hitch on the rear . Then you could tow , scull drag stuff from difficult to get at places or precision placement of water pumps etc . Also good for placing topsoil on steep banks to protect from erosion . It handled both steep and boggy ground . I reckoned if I could work the bottom of an old dam than I could work pretty much anywhere. Love your videos . they bring back so many good memories .

[@bruceinaus]

Thanks for sharing that Trevor, lots of others are sharing some interesting facts and stories about them aswell

[@user-xl5np5dp8n]

Now you gone and done it, Bruce. You set the barre high with this one! A very unique farm implement, indeed....

[@bruceinaus]

Thanks very much

[@laurencehastings7473]

Let the rain come. You've got your buggy, you've got your wellies. Ready to go.

[@bruceinaus]

I’m set you recon, lol

[@laurencehastings7473]

@@bruceinaus Love to oblige mate but I'm in Berlin Germany. By the time I get there the rain will have stopped and if it hasn't you'll be needing waders not wellies.😂

[@zonie70]

No drama getting that one to start Bruce , the old Mitsy was ready to go. Your granddad would be amazed for sure to see that machine doing the work he used to do. Cheers , Scott 🌵

[@bruceinaus]

Thanks very much Scott, appreciate your ongoing support, Bruce

[@chaswalker2038]

Love to see these old machines given a bit of TLC and got back to doing useful work again.

[@DomingoDeSantaClara]

If it's just going to be used for recovering other vehicles, might i suggest calling it the "cane towed"😅

[@matrix54190]

Cool,the down under harvest tank😁. Thanks for the video👍👍 👋🥖🇫🇷

[@SilverJ56]

You NEED that machine, Bruce!!!! It's you!!

[@bruceinaus]

lol thanks

[@roberthevern6169]

Back in the 60s, my step-dad had a pair of battery terminal 'spreaders'! They worked like snap ring pliers,so if before his arrival, someone had overtightened the battery terminal, this handy pair of pliers could open the terminal back up! Cool rubber tracked 'moon buggy'!

[@bruceinaus]

Thanks Robert, i think i have seen a set of them but it was a really like time ago, thanks for sharing that

[@Watchyn_Yarwood]

That brought back some memories. I was a teenaged wanna be mechanic in the 60s and I had a pair of them. No idea what happened to them. Dad bought me a set of socket wrenches and a set of combination wrenches for my 14th birthday. I am 79 and still have some of them, but not my battery cable terminal spreaders!

[@LoganJohnson-lm2bh]

Fun as always sir .I hope your surgery went well and your recovery will be swift .In the mean time thank you for these videos .and looking forward to more from you as you are able .

[@bruceinaus]

hi Logan, not just yet, couple more videos to go before hand

[@LoganJohnson-lm2bh]

@@bruceinaus Hello sir I guess i got ahead of myself there .I do like your videos though .I'm a retired long haul trucker here in the U.S.A. i did oversize and heavy haul loads for 45 years .and in my younger days i spent time every summer working on my uncles Dairy farm and Since i live in Washington state in the U.S.A. I live close to the ocean so lots of boats so Lot's of different types of engines and equipment And yep i did subscribe after the fist video .Have a good day sir and thank you for your reply .

[@lionelfelix6631]

Another rusty beast brought back from the dead. amazing. love the work.

[@Hjerte_Verke]

Definitely put the old machine to work rescuing or recovering, or whatever you want to do Bruce. This was a delightful episode. 💯

[@bruceinaus]

thanks so much for that feedback, greatly appreciated

[@christopherhampson265]

Nice one Cheers Bruce . Anything you get to tinker with is good fun to watch 👍👍👍👍👍🇬🇧

[@bruceinaus]

Thank you Christopher

[@MrTrundleon]

Greetings from Oregon! I've been enjoying your methodical rescues for a few months now, keep 'em coming. I see many KZbinrs make that same sequential-mistake with battery terminals, I've learnt the hard way myself.

[@daddybob6096]

I enjoyed this video Bruce, you have a very simple way of explaining to us novices what you are doing. I was surprised how well the Mitsi fired up and ran so sweet, and you were too, LoL. Bob (Across the ditch.)

[@bruceinaus]

thanks very much bob, im still a bit surprised sitting here at my computer out of the wind and rain!

[@user-fn7or8fw7s]

I’ve known brand new direct injection diesels that don’t start nearly as well as the Moon Buggy. Love to see it doing a rescue or recovery.

[@silverback3633]

I thought the siphon is a straight pipe. That Mitsubishi engine is a pleasure.

[@bruceinaus]

it runs like a swiss watch

[@chrisbailey459]

Seeing a recovery would be good Bruce. Regards Chris

[@ajaks7636]

Another Great Revival and Video! What a Fantastic piece of equipment. Thank You.

[@54mgtf22]

Always interesting. Thanks Bruce 👍

[@harls9287]

Onya Bruce, as always appreciate the time and explanations always a learning in your vids. Thanks

[@scroungasworkshop4663]

Hey Bruce, I’ve been with you for quite a while now and look at you go, +50k subscribers and you’re so much more relaxed in front of the camera. Way to go mate, Cheers, Stuart. Canberra.

[@SuperLaplander]

Lovely vehicle and a very nice video, thank you Bruce&crew!

[@deeferdownunder]

Excellent work Bruce. Keep it up.

[@criswagemansbophadoung8081]

Great video... good to see the moon buggy working again.

[@dangdang3970]

Thats a awsomr bit of machinary, well done bruce

[@matthewsquires423]

Another amazing vid bruce. Loved the walkthrough on how to clean and tidy the battery terminals.

[@user-gs6rx8pm6b]

Wow amazing how it started Bruce 👍👍

[@keithgarland3404]

Always enjoy these, getting machinery up and running. I admire the effort you put in, to try to do the job properly.

[@Tuilaione]

Man, your Amazing Bruce... Love your Engine Big Rig Knowledge...

[@bruceinaus]

thank you

[@alexbilzerian5682]

Always enjoy your videos Bruce. You are such a wealth of knowledge. Thank you and keep the videos coming!

[@NapierNimbus]

Wow way engine sprung into life. Great video.

[@DJVybeBeats]

Excellent video! Thank you!

[@RustyShackleford9000]

So sick!! This is my favorite vehicle you’ve worked on, hope to see it more!!

[@captaintoyota3171]

Gotta love the old mechanical stuff started on like 2nd revolution

[@bruceinaus]

It ran really well, I couldn’t believe how easy it started

[@benwinter2420]

Engines & machines well made , have a basic form of life & like to perform their intended purpose

[@lordieshepherd]

Great work again Bruce and video man. Love your uploads and what you do.

[@boatingboy5337]

Very interesting video. What a great cold start. Thanks for sharing Bruce appreciate it. John

[@bin_chicken80]

This was a good one Bruce. Nice one!

[@JP5isalive]

Another brilliant video Bruce. Well done sir 😊

[@stephensimpson5283]

That thing looks like a tonne of fun!

[@GAIS414]

That is an amazing bit of kit! It was rearing to go.

[@seanys]

Tell us a few more stories like that one about your Grandad, Bruce. I enjoyed that.

[@Brad_The_Truckie]

Great video Bruce, and what a weapon

[@josephprettyman2178]

That is the coolest machine yet.carry on

[@stuartbatcheldor5978]

What an awesome machine! I can't wait to see it in action as a recovery vehicle.

[@donaldhalls2189]

I recon it would be great to see one doing a rescue, excellent rig,thanks for sharing, all the best to you and your loved ones

[@paulmaul2186]

You're a handy bloke to have around. I'll add that started up more readily than a lot of vehicles I've seen. Hands off to Mitsu also. Open cabin notwithstanding, this would be an asset in Canadian winters too!

[@reuben9213]

That Moon Buggy is something else Bruce . Really cool watching your video's. Learning something all the time . Thanks

[@bruceinaus]

Very welcome

[@ericvonwiegen5672]

Awesome ride 👍👍

[@user-mb9tz1om1s]

liked how you did the battery terminals well done.

[@jameslovering9158]

Looks a fun vehicle to drive !

[@donfinch862]

I used to make felt washers (1/8" thick) with wad punches and soaked them in oil or grease 'em to put around the base of the battery post. Worked a treat. The posts aren't hollow - I've drilled into them for odd reasons. Great buggy that, and seems to run well. Cheers Bruce

[@wercs4me]

That's got a sweet sounding Motor... Mustang Bobcats had the same T Bar for movement... Keep the Videos coming Bruce.... Great to watch :)

[@roryheggie7633]

Love to see that machine again bruce good video cheers

[@bruceinaus]

thanks i will see what i can put it to use

[@vidstjepanvlahovic856]

so glad i found your channel

[@marcfournier823]

I loved this. I'd like to see you restore this beauty complete with mirrors, lights, new hoses, paint and maybe even a bin camera and backup camera.

[@billblock8090]

Hello from West Texas. I very much enjoy your videos. I look forward to your " storytime" as it is not only entertaining but informative. I hope you keep providing us with great downloads. Good day mate.

[@robertjospeh1097]

Now that's a cool machine. If they get rid of it, you should add it to your collection.

[@arthurmann578]

Really nice video! Glad I found ya'! Subscribed! 👍👍

[@Lex-Hawthorn]

Brilliant work Bruce, fast start too. I want one.. LOL what a little ripper.

[@potrzebieneuman4702]

What a seriously cool machine, I'm a sucker for anything with tracks.

[@alans.7733]

Bruce I havent heard you speak of having any kids or grandkids (maybe I missed it) but I hope for their sake that you do. I surely do miss following my grandad around on the farm and watching his every move. You have a lot to offer and a great countenance about you.

[@mejselq]

Amazing machine! I think I need one!

[@pouwakaruwhiu8349]

A Job well done Bruce 👍

[@ozybikesanbits4574]

Love ya brucey Your content is gold

[@bruceinaus]

Thanks very much

[@darcyw8995]

Yet another great videos Bruce, I’d love to come met you one day as I believe I don’t live too far away from you (being from Bundy it’s awesome to here you mention our own Austofts) and learn some cool tricks on a revival. Keep up the good work old man!

[@runsolo7418]

What a sweet machine!

[@paulw3182]

Another Great Video!!! Its great they are keeping the old tractor working - Yet, the Moon Buggy is an excellent platform for a custom build. Good point on the stainless steel strainers - especially on the hydraulic tank. A good invention for someone to create and add to existing equipment.

[@jayjones6904]

Love rescuing ole equipment retired operator and new subscriber Bruce ty

[@fetus2280]

Reminds me of vehicles made here in Canada for logging and the far north, for use in snow. This is pretty cool to see mate, appreciate it. Cheers.

[@jimclarke1108]

You are doing a great job of finding all these machines, and repairing them, night have the same luck with a gold detector😁

[@paulmcdonnell9734]

Great video Bruce , we had an old Mooraka to launch our lifeboat here in Ireland

[@EssentialComment]

The T bar system was very common on Mustang Skidsteer loaders 2044 and 2054, I have one and have worked on them for years, they are not made anymore but they were great in their day. That machine looks unstoppable.

[@sasquatch5680]

Great videos Bruce

[@bruceinaus]

Thanks very much, there’s no shortage of videos to make but time is the issue

[@graeme9679]

What a brilliant little mule.

[@bruceinaus]

yes something different and great for the weather we've been having here

[@markclifton14]

Great machine Bruce. Would love to see it run a bit more . 👍👍👍👍👍👍👍👍

[@not-pc6937]

What a machine Bruce !!! Well done mate 👍😃

[@bruceinaus]

thank you

[@a-jey5406]

I love all bruce videos!

[@lewiemcneely9143]

I grease my terminals too and even on flashlight batterys. A pal of mine used to get building rocks out and haul them out on one of those. It scared the boss to death to watch him but rubber works fine on slick rochs opposed to steel. And as to the 'T' steering, I had to load a truck load of gypsum with a bitty articulated rubber tired loader that had that for direction and steering. Powered by a 2 or V-4 Wisconsin and it had a lot of slack all over. The owner of the place loaded the 1st but I had to load the 2nd load going to a tree farm. It was on a loading deck and had to load by turning the truck around and over both sides. Do anything and God willing I'll watch! CHEERS!

[@benwinter2420]

I have greased the whole terminal too from decades back with no ill effect , it is the lesser of two evils in regards to the white oxidation/electrolysis of different metals on terminals in contact , between that loses the conductivity first , when apart crusty demons pour a bit of water to dissolve the white oxides & then a bit of file & then grease . . & Bobs your uncle

[@lewiemcneely9143]

@@benwinter2420 I also replace the stock terminals with big washers and a 3/8ths bolt with a couple of nuts so I can get jumper cables on easily if needed and instead of electrolytic I just use gun grease or red-plex, whatever is in there OR wheel bearing grease. It's always worked. No felt washers soaked with whatever. Just lay the grease to it's hide!

[@flir67man84]

Great video bruc, would to see it rescue something

[@bruceinaus]

thanks very much, stay tuned

[@rodneymiddleton9624]

Nice machine!!!

[@nevillegoddard4966]

Moon buggy alright! Paint it silver with orange highlights, enclose it in glass & you have yourself the "Lost In Space" chariot! You can leave Dr. Smith behind though! I was imagining the dramatic, panic-inducing background Lost In Space music as you were driving along Bruce!

[@benwinter2420]

Take it to small town shows then & watch all us oldies get watery eyed from nostalgia

[@mcjdubpower]

G'mornt Bruce 💪 great vid, thank you from the UK

[@bruceinaus]

thanks very much

[@robleary3353]

Brilliant old school mechanics!. Love the simplicity of the fuel syphon!. Always a joy for this mechanical 'Noddy' (has an idea what needs to be done, hands don't have a clue! 😂) watching these vids!. Nuff said!. 🙂 👍

[@bruceinaus]

thanks for your ongoing support Rob

[@robleary3353]

@@bruceinaus Like I said previously, you keep making em, I'll keep watching them!. Have had battery issues with my old ford focus, will use your grease trick!. 👍 Till next time!. 🙂

[@DougAskin]

They used to call the machines that picked up the cotton modules a moon buggy, maybe it's a name for unusual looking machines. Grease around the base of the battery terminals is a good idea I think

[@noorzaidi220]

Enjoy your job pup ...! 🎉

[@bruceinaus]

thanks for the ongoing support

[@tomwheeler9244]

Please enable captions for us older fans with hearing issues..love the channel but hard understanding talking..THANK YOU

[@bruceinaus]

Thank you, I will try to do this, in the next one

[@tomwheeler9244]

@bruceinaus thank you! Just learned about the grease and terminals watching that..never seen that before but guess what I'm doing on my car tomorrow? Thanks again!

[@Catcher5632]

As far as I know, captions are working for me. I believe they are enabled. I could be wrong!

[@ridhobaihaqi144]

Australian accent. Hard to hear 😂😂😂

[@StevenMilne-sm4fk]

@@ridhobaihaqi144ha, yea😉

[@jasonshull3106]

Are you neer Cairns AU. I was there 25 years ago and was told by people that it was the largest unfenced asylum in the world. I thought that they were joking, but no, that was accurate. Love your country. What a space.😊

[@adamk3390]

These are great thanks Bruce and camera man! More greetings from England. Keep up the great work

[@bruceinaus]

thanks very much

[@wesstephens7809]

We’ve used these in the southern states pipelining for along time. They make an excellent tack rig on the front end, I couldn’t tell you how many miles I’ve walked along side one of these rigs laying pipe. Great video mate!

[@bruceinaus]

Thanks for the info!