Counter Pressure Filler/Carbonation Cap Review

#carbonationcap #homebrew #review
Testing out a counter pressure filler carbonation cap, great bit of kit, no more beer all over the floor when filling bottles off the keg!
Support the channel by using this link if you want to buy a carbonation cap:
rover.ebay.com/rover/1/710-53...

[@bentosan]

I recommend filling the bottle with water/sanitise, home the bottle upside down, connect to gas and slowly unscrew the lid until all the liquid comes out. That way you only use enough gas as to replace all the oxygen while sanitising the bottle at the same time killing two birds with one stone.

[@Whatisgoingonhere2021]

I've had these for ages to clean lines and only just thought about using them for bottle filling. I'm going to use a picnic tap so I don't have to keep opening the cap to vent gas.

[@indiekiduk]

Great video I'm new to kegging and learned so much, thanks for sharing it!

[@MultiChef888]

A very good how to video Rich mate well done , thanks Ivan

[@frankshomebrew7759]

Top video mate. Great idea

[@b.e.d.brewing3909]

I picked a pair of these up; I used one in my carboy cap to apply the pressure instead of breathing in it which always grossed me out.

[@CreweWolfCraft]

Great little tool, Brill review mate

[@garethsharp4039]

Great video! I must have another crack with mine. I only tried to use it for cleaning. Cheaper than a beer gun!

[@imperia1999]

Nice one bud I bought one a while back just to clean my lines, it works well as a cleaning not used it for anything else.

[@apexbrewhouse]

Nice one!

[@norfolkhillbilly]

Great gadget I made a line cleaner from one a couple of years ago same as DrHans vid, saves on gas. Cheers

[@reddogales9029]

After viewing your new video i had to give this a watch, why haven't i bottled like this before. Im all over this now.. Atm i just bottle from party tap but carbonation is just lousy. Thank you so much for sharing.

[@DudesBrews]

yeah it definitely preserves carbonation better than the tap method and its really easy too, great for beermails off the kegs

[@beanhamhomebrew1808]

Nice one just how I do it and 2 litre bottles are great cheers

[@cadencebrew]

Silly observation perhaps but when cleaning, you could just squeeze the bottle gently with your hand to not need co2

[@Whatisgoingonhere2021]

Exactly what I do

[@MRGIT999]

Co2 is heavy than air so when you pressure the bottle there is no need to open the cap releasing it just connect beer line and then realise cap to start filling

[@jeffbrislane5782]

I using these to carbonate a bunch of PET bottles filled with pilsner that didnt carb probably in the bottle because too much w3470 yeast dropped out before i bottled.

[@18centwood]

I imagine I could make this work with pin lock system as well by substituting parts. I would rather force carb along with shaking to get a few bottles drinkable straight away than doing that with my keg and let keg Force carbonate at slower pace. Great vid!

[@DudesBrews]

Should be easy enough if you create your own adaptor, to change from one to the other. Yes it’s definitely a good way to force carb a small amount without potentially overdoing it on the whole batch. Cheers