Cow Poop pipes and pumps

[@280813jb]

Sarah’s tractor is looking like a new one. Lots of hard work Sarah and Alex. Great video, thanks Andy.

[@greg10469]

That 9560’s a lot of tractor in the shop. Takes up most of the bay. Sure glad the girls like it clean but what a project 😊

[@toddmatson4179]

Sara’s tractor is looking good...Only thing missing is some spinners and LED lights underneath

[@popswrench2]

no fuzzy dice ???😂😂

[@haroldwilkerson2026]

What about a foxtail on the antenna 😂

[@JB_Machine]

Don't forget the pink fuzzy steering wheel cover 👌

[@christisking7778]

They don't call him "Hollywood Hourigan" for nothing 🤷

[@mannsjm]

The amount of equipment and facilities it takes to milk 1800 or so cows is incredible. So many things to keep in snyc and to keep operating. I got out of dairy in 1986, small family farm, two guys doing everything. The manure operation was to clean a calf pen by hand, stacking the straw/manure in the back of the spreader to build a wall that holds the rest of the load. Then back under the "barn cleaner" to run the gutters into the spreader. If we didn't have a place to spread the load, or when there was too much snow to spread in the winter, it was stacked to be hauled out later.

[@williammurphy1592]

Thanks for the update team

[@FarmingFixingFabricating]

Anytime Bill

[@timmiller7037]

Ugh broken studs…I’ve had pretty good luck welding nuts on … I’ve also had very good luck using a left hand twist drill bit for the studs that broke off and are recessed back in .. as the left hand bit drills it a lot of time will catch and spin the broken stud out ..great diverse video…always something going on! Tractor looks great all shined up!

[@terrydarow8401]

Sarah tractor looks great nice and shine you did a fantastic job pump is cool first time that I ever saw that work cool nice job everyone

[@martinboilard2265]

Hi Andy very good looking tractor in the shop the wax is out there. the new crowler tasting the cow manure. haha! Thanks Andy for your time and everybody have a good day at the farm ! 🙋‍♂️

[@roba4297]

Hope the drinks bottles in the slurry don't block the crawler intakes !!!!

[@stevenclaeys6252]

Thank you for another great video. Stay safe out there. Cheers

[@larrymagill5422]

Holy crap you break lots of equipment. Glad I don’t have your headaches! Makes great content!!

[@FarmingFixingFabricating]

Do you think it’s broke from miss use, or wear and tear?

[@donniehodge2548]

Another good one Andy KEEP THEM COMING 🐄🚜🌽👍🇺🇲

[@johnnylindsey5808]

Good job Andy and family

[@mannsjm]

That crawler looks really good. Would be nice to see it working through the tunnel.

[@scottharvold6286]

That pipe fix looks pricey !!!

[@philglover2973]

Awesome video thanks Andy for your time and consideration top job top team very informative 🚜🚜🚜🚜🚜🚜

[@jamesmorrison1884]

Enjoyed your video thanks Andy

[@farmingfishingfamilyontari2814]

Canadian built and engineered. That Nuhn company is impressive. 🇨🇦

[@brirei4417]

Are the flashing lights on top to let you know if the pump is on or not? I know probably a stupid question

[@richardradawetz8788]

Put a cover over that ear port and run a tune😊

[@Adam_Poirier]

Your like me.. interruption after interruption, and then, when I go to look at some thing else I notice other issues that need to be addressed lol.. similar to you noticing the broken pipe on the fence and the gun off of the manure pump. That new crawler looks pretty good.

[@FarmingFixingFabricating]

Yes it all gets to be a pain sometimes

[@bigmackstruckstop9213]

Enjoyed your shop show Andy catch ya on the next one. 😊

[@wags9777]

There's no wonder as to why you can smell certain farms from miles away. He said "poop lagoon."

[@robertthacker495]

A question. I have wondered if it would have value to use stainless steel bolts on the exhaust manifold and turbo??

[@kaldudas9651]

Great video an the operation of the crawler 👍🚜

[@ronaldfeuerstein435]

Some LED's would be nice. On the girls tractor. But tks for sharing. The crawler fit in the tunnel all the way to the other Barn? There was alot of buttons on the belly pack.that thing must be amazing.

[@FarmingFixingFabricating]

No it won’t fit

[@ronaldfeuerstein435]

@FarmingFixingFabricating but just a piece of round stock to fit in the yolk. Would save welding on the table. Sorry just a suggestion! But I'm sure you know more and what does or don't.

[@kellyburrell949]

Have a shop in shamrock, Texas. We work on big trucks we in the past have used pip nipple To center the drill in the manifold When it works that way, it says a lot of time. We use left in the drills a lot of time to manage to get it out without removing the manifold

[@FarmingFixingFabricating]

That one was in there pretty good

[@johnmaynard3445]

Will the crawler just keep pushing it around?

[@geesss8675]

/that sand is causing all kinds of problems.

[@lesterhertel2945]

Another very interesting video Thank you 😊😊😊

[@charleslynch7274]

Great video as always Andy

[@thelegendairyfarmer]

Do you have the option to blow the pipe out ? We have an 2 inch air inlet on the pump side. When it plugs with sand.....just blow it out with an big air tank or a big compressor

[@FarmingFixingFabricating]

Yeah we do…more to come you’ll see why it didn’t work

[@mikebonge7206]

It is amazing that a stud manufacturer does not a a suitable manifold stud. From car racing to the farm

[@mikebonge7206]

The ceramic coating i spray turtle ceramic coating will give best serve. U can use windows also

[@akfarmboy49]

How long does the pump last In orange manure mixer? Is the pump just made of steel? Or harder steel

[@FarmingFixingFabricating]

3-500 hours in sand, white metal

[@steveharrington301]

👍

[@dcw1540]

Does it take special paint on that plastic.mine is the same way.thank Andy😊

[@FarmingFixingFabricating]

No not really, just scuff prime and paint

[@niekc79]

How did you size that manure pipe? It just seems so small.

[@FarmingFixingFabricating]

How big of a pipe do you run?

[@niekc79]

@@FarmingFixingFabricating Well my friends pure gravity system runs like 200 feet and they run 18 inches granted they run shavings. Do you ever push a ball like they do when they drag line?

[@FarmingFixingFabricating]

Gravity is different that pumping manure…They should probably have a 36” pipe for gravity

[@Mainly-boy-outdoors]

Andy how many gallons of fuel does the new crawler hold?

[@FarmingFixingFabricating]

Not sure off hand

[@chevyguy-hf1yq]

Get those girls a buffer and have them watch a few correction videos please!

[@johnmaynard3445]

bottle in Lagoon.

[@johnhenderson299]

Great video

[@homey3051]

[@davidholder3207]

Constipation in the pipes.

[@kdel9776]

Sister piwer

[@coryfritz295]

Did you try to get your manure line jetted by a company with a JetVac truck by chance?

[@FarmingFixingFabricating]

Yes

[@davidkimmel4216]

Interesting 🧐

[@larryjones1774]

Your kids sure don't sit around on their cell phones and games councils. That are some hard working kids. They rather be running tractors and driving trucks.

[@mattphillips4260]

dang how deep is that pipe

[@FarmingFixingFabricating]

16’

[@mattphillips4260]

dang @@FarmingFixingFabricating

[@craigflatley7370]

🇨🇦👍

[@norcalray7182]

Awsome video..Have you received the new tractor?

[@FarmingFixingFabricating]

Not yet

[@stephensteen9058]

Andy, I love Alex sorry not sorry

[@Rodmanvt]

Water bottle

[@BennyMitchell-d3s]

How many cows do you milk and how many heifers do you raise. I am old and retired now but I was raised on dairy farm and milked til just a few years ago. I was small ran around 60 head and raised my heifers. To watch such a big family dairy working together is very interesting. I also run john deere equipment. Thanks for your videos. P.S. I am from indiana.

[@FarmingFixingFabricating]

Milk couple thousand

[@Planeiron]

Great Vid👍👍👍👍🌽🌽🌽🌽

[@bradolsen8629]

Andy, let me ask you a question what you’re suggesting sounds really painful why would you weld your nuts to the tractor? Ouch.

[@jonasadahl3323]

no rototilt or side tu side tilt. as an european what the fuck

[@FarmingFixingFabricating]

On what

[@MyDuckfoot]

Why is it everytime I see a shop video on youtube it a green machine ?? 😅😊

[@350mack]

Cause they get used an then some😮 then they break. 😊

[@kevink4914]

Called maintenance on. The other color ones are broke down dead in the water in fields 💁‍♂️😉😉😂

[@FarmingFixingFabricating]

Come right out and say it, what are you getting at?i promise i won’t make you look stupid. Come on you can do it, say it

[@edwhite6250]

👍