Рет қаралды 90,072
In the video I show you how to prep the RG 6 Coax cable. Then show you how to install all 3 type of connectors. Twist-on, Crimp, and Compression are three most common used and can be bought pretty much anywhere.
When striping the cable bite down to the copper conductor but not all the way through. You can start around 1/2" to 3/4" from the end of the cable and expose the conductor. Then remove 1/4" to 3/16" of just the outer jacket. fold the braided wire back and remove the foil from the dielectric. Now add your connector of choice.
You can always email me at sparkyinstructor@gmail.com