Few know this Way to fix a Electrical Plug When it is Broken!!

[@MirlitronOne]

If you MUST carry out this dangerous repair, at least offset the two joins so that they are not alongside one another and cannot short across. Secondly, don't do this.

[@CreativeMaster999]

Offsetting the joins is a great tip to prevent short circuits! Make sure to follow safety precautions when attempting any electrical repairs 🔌🔧.

[@JazzFunkNobby1964]

Makes no difference because there is insulation between the soldered joins.

[@MircoMelloni]

And If you are alone, in a valley, in a desert 100km far?!

[@ahaveland]

And double, triple the heatshrink tubing, and use bigger ones to cover everything instead of using cotton and tape. Filling larger heatshrink tube with hot glue can be used to help with strain relief too.

[@p.macdermott2490]

This video should be removed. It could cause someone's death. This is very dangerous. A replacement plug top is the only safe solution.

[@toppersvantoen]

It may look safe and probably it even is save, but when you have a fire in the house, the insurance will not pay a penny when this is found in your house. even when it was not the real course of the fire. A replacement is so cheap, you do not want to take the risk.

[@Nikioko]

It neither looks nor is safe. Just keep your fingers away from such “hacks” and buy a safety certified replacement instead.

[@proislam-co6pg]

no, this is bullshit. Insurance has to pay, if that was not the cause

[@ClaudiaMolina-e2o]

Bravissimo !!!!!già fatto!!!

[@ilumen1004]

YO ARREGLÉ TRES CABLES DE ESTA FORMA Y TUVE TRES INCENDIOS EN CASA....EL SEGURO SOLO ME RECONOCIÓ DE TODOS LOS DAÑOS, SOLO OCHOCIENTOS VEINTE MIL DOLARES.-

[@和昭-u3k]

このやり方はお勧めできません。 DIYが好きな方はある程度可能かもしれませんが火災がおきて家を失うかもしれません。 わずかな費用を節約できても元も子もないと認識するべきです。 修理屋さんや電気工事士の資格のある人に依頼しましょう。

[@harrykoba141]

火災保険が減額されるかもね。

[@CreativeMaster999]

متأسفانه قیمت دوشاخه‌ها متفاوت است اما در این ویدیو نشان می‌دهیم چگونه یک دوشاخه شکسته را تعمیر کنید! 💡🔌

[@hakoniwatrain]

この動画の作成者さんは日本人ではないのでしょう。 日本では36Vを超えるような電気回路を工事する場合には国家資格が必要になります。 素人が工事をして事故を起こすリスクを減らすためです。 まぁ作成者さんも、世界中に発信する動画で、いちいち各国の事情を調べたりはしないでしょう。

[@qp3minutes706]

火災の発生以前にカッター刃で指を切創しそうで怖い

[@westcoasttrap]

@@CreativeMaster999 ほぼ予想通りの修理方法。 だが耐久性に問題ありと見た。

[@colh5910]

Firstly this video shows you how NOT to use a sharp blade to cut wires and secondly it's better to buy another plug and throw the original away. Simple.

[@bebopalooblog2877]

No. It isn't. Replacement plugs not only suck, they are designed for 14-gauge wires, ideally non-stranded, not the fine wires of what looks like a low-current LED light string to me, having just replaced a plug on one. Also, in much of the world, like small villages in Mexico, such things are not available at all. The replacement plugs are expensive, non-waterproof and provide no method to protect fine wire connections from mechanical stress. You are therefore left with binding the insulation to the plug with electrical tape and praying nobody pulls on the cord. This method is superior to that, but it's actually better to splice on an old lamp or appliance cord rather than deal with the short wires. Then you can fold the wires back on themselves and bind the whole thing together with tape, protecting the relatively weak splice from the tension inherent in most string-light installations.

DO NOT EVER do this. if you have a fire. the insurance company sends a "fire investigation" specialist. when he finds this stupid repair, your insurance company will deny your claim.

[@pietlimburg4866]

​@@bebopalooblog2877 Teveel en moeilijke uitleg...

[@Philippe-rt3kh]

@@bebopalooblog2877 because the waterproofing is ensured with chaterton? Up to the fabric wire it was fine. The glue of the chaterton will flow over time, and you have to use non-flammable wire. you should have reused the rubber that was removed to strip the wires, which you would have melted beforehand, or remodeled the socket with sticky, elastic and UV-resistant silicone among other things. but above all... never use a flame, it degrades the properties of the plastic coating the copper wires.

[@thidoanduc-de2ox]

You’re right, man !

[@Timba-w7f]

So buy a soldering iron, solder, knife, scissors, tape, and spend 45 minutes to repair a $2 plug. Yeah, sure. 😂

[@georgedvorak9481]

And it would probably be badly soldered, had an inadequate safety and it would look ugly...

[@lekkerdropje]

never ever cut knive to skin! and flame too close to isolation material. it burned!

[@TheCitizenmax]

yeah but 1.9M views but

[@tomazermenc3047]

Uporaba izolirnega traku ni profesionalno. Raje kupi nov kabli z vtičem!

[@롱롱롱이-g8p]

하나사는게 훨씬싸다 미친짖 가이다

[@charleskirby6143]

What a hack job, not to mention dangerous!

[@richardlewis5316]

This would do for an emergency fix but never a permanent repair. Just get a bew plug for a few pence/cents

[@CreativeMaster999]

So glad you stopped by to comment! Thanks for the engagement.

[@harpintn]

A new plug would be best, but he used a standard solder splice. I would suggest that he also use shrink wrap tape over the electrical tape to make for a stronger safer splice.

[@АндрейГеоргиев-ъ5ю]

Глупости

[@bollockchops]

Nothing wrong with this fix maybe just pet a new plug on it but it's fine I'm 60 🇬🇧🇮🇪

[@MacNewton]

It is an excellent video recording, but the whole point on safety is missing. If someone follows the instructions perfectly, they end up with a very dangerous setup. No, unless this is an emergency requirement, it should never be done. Buy a replacement plug that was designed to work better and last longer. If someone repairs an electrical cord in this fashion, they end up having an electrical failure and possibly a fire hazard.

[@richardlewis5316]

I said that just before reading your post. Shouldnt be allowed to show this sort of video

[@markswanson6898]

Safe the earth. Recycle when you can!! One less cord in the trash.

[@joeylawn36111]

To say nothing of how one’s Fingers could be badly cut up with that razor knife….

[@CreativeMaster999]

So glad you stopped by to comment! Thanks for the engagement.

[@krzychol6657]

​@@markswanson6898 Save the Earth, but use your brain first. The way of "repairing" gives dangerous utility an can cost somebody's life. It is better to throw the plug to ♻️ and use replacement plug. Really.

[@ECOARTESBRASIL]

O Senhor Deus colocou o homem no jardim do Éden. para cuidar dele e cultivá-lo. Gênesis 2:15. 🔹Devemos amar e cuidar da Criação pois ela é a manifestação da gloria do Senhor Salmos 119:1

[@CreativeMaster999]

Devemos sempre cuidar e consertar o que está ao nosso redor, assim como consertamos um plugue elétrico quebrado! 💡🛠️

[@josecarlosbueno9591]

Melhor comprar um plug novo e não arriscar a segurança

[@CreativeMaster999]

Melhor seguir as dicas do vídeo e consertar o plug de forma segura! 💡🔌

[@ORealdavida]

​@@CreativeMaster999 Você achou essa forma segura? E ainda se intitula mestre? Me desculpa, mas todo essa trabalho com solda é queimando e fio. É 5 reais um plug novo meu amigo. Essa borracha de proteção de fábrica é testada para isolar o calor da amperagem elétrica. Isso é uma GAMBIARRA e muito trabalhosa.

[@ojuara77]

@@ORealdavidavc está redondamente CERTO 😂😂😂 PARABÉNS

[@ojuara77]

Vídeo longo pra uma gambiarra Compro um novo É melhor é mais seguro Põe um plug novo é baratinho Pô Francamente 😅

[@wolemai]

Not good! Too many chances of nicks in the wire and short circuits. Far easier and safer to buy a new plug and connect the appliance end of the cord to it.

[@CreativeMaster999]

I completely understand your concern, but this method can be a quick fix in emergencies! Just make sure to handle the wires carefully 🔌.

[@charliesolbonjourmec9788]

Por favor que nadie haga este remedio, mejor comprar un enchufe desmontable, bien colocado es mucho más seguro y es económico.

[@MrWombatty]

Wonder how long it would survive if that lead is on a vacuum-cleaner fitted with a retractable-cord?

[@malcomconfac3907]

Hey kids you can use your playstation now. Tug on the cord like you usually do (how it broke in the first place). Reach around the back of the cabinet to plug it in with your wet hands. I have done this (remote location not near stores) with offset joins and heavy shrink over the top and still didn't trust it so got rid of it. I only watched this to the end to see how bad it really was. I noticed slight nick in the insulation for starters - prone to break/shortcircuit even if not conductive just yet.

[@CreativeMaster999]

We're glad you watched till the end! Remember to always prioritize safety when dealing with electrical plugs. Stay safe! 💡🔌

[@pappyfiddle]

@@CreativeMaster999 If you reallllllly cared about safety you would take this video down. Sure, make videos showing how to fix things, but when you get 500 comments showing it AINT GOOD, TAKE IT DOWN!!! Make a new one with the offset mentioned, use a real wire stripper that won't nick the insulation, don't wrap it with thread, don't wrap it with rubber tape, and there should be something to replace the grip you cut off.

[@tedjakubczyk7688]

@@pappyfiddle go ahead, do it, bzzzzzt short, bet you won't do that again, old 60's parenting, worked for me...hahaha

[@pappyfiddle]

My grampa would be so proud of you. We used to fix everything, whereas now we usually just buy a new one. Grampa is rolling in his grave... but in the factory they stamp out a new cord in exactly 2.5 seconds, and this took 5 minutes to repair, not counting 3 hours for trips to the electronics store for soldering iron, solder, and shrink-wrap; to the hardware store for electrical tape; the fabric store for thread; the department store for superglue... It really doesn't make sense to fix a lot of broken junk unless you're stuck in some remote location and need that lamp in a hurry. And have all that stuff on hand.

[@CreativeMaster999]

Your grampa's spirit lives on in those who still choose to repair instead of replace! It's a lost art, but so satisfying when you get it right 🔧🔌.

[@michaelgilroy1277]

On his next video, how to fix an amputated thumb.

[@CreativeMaster999]

I'll keep that in mind for my next video! 🔧👍

[@davideg2698]

🤣🤣🤣🤣

[@jjchef68]

Learning CPR

[@p.macdermott2490]

Let's hope there are no more videos from this idiot

[@le3man]

lol lol lol i was thinkng the same thing lol

[@ni35so7et17]

The "repair" is against all safety standards - acceptable only in the absolute case of need and far away from children.

[@CreativeMaster999]

The method shown in the video should only be used in extreme cases and away from children. Remember to always prioritize safety when dealing with electrical repairs! ⚠️🔌

[@apveening]

@@CreativeMaster999 And as most idiots won't understand that nor read the comment, the video should be pulled.

[@gabrielantoniea9913]

Super comentariu,asa este

[@zingaflux]

stop bothering us with your stupid standards..., nature works like that

[@jolkas]

Wszelkie naprawy powinno się przeprowadzać z dala od ( małych) dzieci. A więc jako, że to oczywista oczywistość druga część komentarza zupełnie zbędna

[@PaulChambers-r6z]

Don't do it like this . Its dangerous. Not to mention the injury risk while carrying out the repair !!!

[@CreativeMaster999]

I appreciate your concern for safety! In the video, I demonstrate a safe and effective way to fix a broken electrical plug. Always prioritize safety first when attempting any repairs. 🔌👍

[@velovelo7717]

...is he the son of Ted Bundy ?

[@apveening]

The injury risk is a skill issue, I have used similar techniques without problems (but never so electrically unsafe).

[@dudleyrathborne9849]

While I haven't done this exact repair on a plug , I've chosen to use replacement plugs . The solder is absolutely necessary . But the shrink wrap insulation is a nice touch .What really surprised me was the use of thread to create a safe and flexible relief for the wires . I'll remember that trick . Otherwise ,I'd say well done !

[@CreativeMaster999]

Thank you for the positive feedback! I'm glad you found the thread trick helpful. 😊

[@dudleyrathborne9849]

@@CreativeMaster999 Thanks for your reply . I've spent my adult life making my own cables and repairing those that have failed . There is nothing wrong with what you did . I'd do it myself . Thanks again ....Yours truly .....DGR

[@fractuss]

Or just spend $1.50 on a new plug.

[@CreativeMaster999]

Sometimes a quick fix is all you need 😉🔌.

[@dennisgarber]

I never had any luck with off the shelf plug ends. Even when I paid $200 to get a bunch of my cords fixed. I do a similar method as this with more reinforcement than the video shows. Nothing you buy off the shelf is engineered to work flawlessly. Everything is engineered to be just good enough to sell at the price people are willing to pay. Moreover, even the plug ends they sell that do not really work, are often as expensive as getting a new cord.

[@dennisgarber]

I use several extension cords for work each day and use about 250 feet of them on the weekends to mow my 75 feet by 400 feet deep lawn, since I have so many cords, and a corded lawn mower doesn't stall on long grass like my riding and push gas mowers, and the electric cuts the lawn shorter and the lawn looks better. My lawn grows an inch per day and I need to cut it 2 times a week with my gas mowers and once with the electric. Also, the thinker the copper wire, the more brittle and more quickly we get cord breaks. The thick wire is nearly impossible to get a good plug replacement. So slicing and soldering has been the only practical solution. It seems like a good thick cord does not take very long before needing a repair, more so than the thin. The wife and son refuse to mow rationally, from the outlet outwards, so the cord cannot get run over. I think they also purposely run over the cord with the lawn mower as an excuse not to mow, just as they use the excuse that they can't get the fas mowers started. Thus a seemingly constant cord repair is the norm.

[@Shenron666]

@@CreativeMaster999 "quick" is a big word here but can you tell us the cost of therepair ? soldering iron consumption + Solder Wire, lighter, heat-shrinkable sleeves, tape and unvaluable time. Of course i suppose you already have all necessary tools

[@bobbailey7024]

@@CreativeMaster999 Followed by a funeral.

[@mattc.310]

You're running 230v through that? I think I'd just install a new plug. Rock on.

[@CITADEL5]

I don't think its 230 Matt. I think that is a European plug. Either way it is way too much effort for the benefit. A new plug is the way to go.

[@CreativeMaster999]

I heard you, thanks for the comment

[@krisja2995]

@@CITADEL5 And what do you think the standard is in Europe?

[@CITADEL5]

@@krisja2995 I thought it was 115. Don't assume I know I am just guessing.

[@krisja2995]

@@CITADEL5 Standard (for Belgium/ Europe) is 220V + and - 10%

[@user-wd9dr2vv1q]

Materialkosten inkl. Arbeitszeit: ca. 5 Euro, Neukauf Kabel ca. 3 Euro ... Und ja: Notruf Feuerwehr 112 !

[@CreativeMaster999]

Danke für den Tipp! 👍🔌.

[@johnmonsoniii9970]

The purpose of the moulded plastic you cut off is stress relief. Without that, plugging and unplugging will damage the insulation on your wires. This is an electrical fire waiting to happen. Buy a new replacement plug where you can tie a stress knot and crimp the cord so as not to pull apart your connections. Do it safe.

[@CreativeMaster999]

Got it, thanks for the tip! 🔌👍

[@PeterAnthonyvandewaal]

I agree very dangerous, I suffered a very bad electric shock and burns from a similar type of repair many years ago 😮

[@CreativeMaster999]

I'm sorry to hear about your experience. Safety is always the top priority when dealing with electrical repairs 🔌.

[@p.macdermott2490]

​@@CreativeMaster999 Are you for real, talking about safety, when you are carrying out a very dangerous repair like this. You should be ashamed of yourself for being so stupid.

[@serkanyucedagl8328]

Bir tane elektrik fişi alıp bağlasaydın daha zahmetsiz olurdu

[@ilumen1004]

POR BOLUDO SEGURO

[@maxmaier5243]

If the video ended 0:08 it would be absolut fine.

[@CreativeMaster999]

It's great to see your engagement! Thanks for being a part of our community. 🙌

[@Nikioko]

That would have been the correct behaviour. Everything that follows is just dangerous.

[@ronchabale]

Haha

[@Red_Avenger]

😁👍

[@cinacclaim]

The very best solution, bravo!

[@richardlewis5316]

This is a highly dangerous bodge job which should not be carried out except in an emergency when buying a new plug or even a complete lead is not possible. A simpler temporary repair is to use a connector block. Ugly but safer

[@CreativeMaster999]

Thank you for the tip! Safety is always a top priority when dealing with electrical repairs 🛠️.

[@stemplek]

ha ha ha

[@adriana56047]

So, you know that you can use a blow-molded tube to strip the insulation from soldered wires, but did you miss the fact that you can also finish off the entire repair area instead of wrapping it with thread? And everyone who has ever held a soldering iron knows that you can repair a cord this way.

[@CreativeMaster999]

That's a great idea! Thanks for the tip! 😄

[@wasabi4u724]

2:57 cold solder joint. Not good at all. At least use some flux and not brush the solder over the wires. Afterwards, throw it all away and buy a new cord/appliance. I would not recommend anyone using this method.

[@CreativeMaster999]

I appreciate your feedback. It's always important to use proper techniques when fixing electrical plugs. Thank you! 👍

[@SamuelLanghorn]

@@CreativeMaster999 Funny guy 🙂

[@leahjane8849]

I absolutely hate those bloody stupid plugs the manufacturers put on electrical appliances .

[@CreativeMaster999]

I feel your pain! 😫 Check out my video for an easy fix to those pesky plugs! 😉🔌

[@DavidCase-ov5uo]

Temporary fixes can become permanent- then accidents happen- tragically!

[@CreativeMaster999]

Always remember to follow proper safety procedures when fixing electrical plugs to prevent accidents! ⚡🔌

[@КакГде-в6б]

Понял, что автор душный после кадров лужения… когда увидел нитку, вообще обомлел… на самом деле автор молодец и учит как правильно. Просто я лентяй😄 Когда чинил жене фен, просто концы соединил в клеме и изоляции добавил, чтоб не разболталось. Еще есть вариант с разборной вилкой: срезаешь старую, концы вставляешь в новую и закручиваешь. Это проще, чем вот это все. Но посмотрел с интересом. Автору спасибо👏

[@CreativeMaster999]

Спасибо за совет! 😊👍

[@rasmuswittsell10]

Other title to this video: "Only maniacs use this method to fix a broken cable."

[@CreativeMaster999]

Haha, maybe a bit unconventional but it gets the job done! 😉🔌.

[@RFC3514]

Using the *worst* possible tip on the soldering iron was truly the cherry on top.

[@CreativeMaster999]

Haha, glad you enjoyed the tip! 🍒 Thank you for watching!

[@MrWombatty]

....& some of the worst soldering I've seen for years!

[@whitebeardInn]

So many things are wrong in this video, but I'll just say this: Never, ever use a cigarette lighter like he did in this video!

[@mariancnota2729]

Może to jakiś piroman?😅Pracowałem 51 lat jako elektryk czegoś takiego jeszcze nie widziałem.😮

[@mariancnota2729]

😊

[@DavidCase-ov5uo]

I recently cut my hedge trimmer mains led, with the trimmer! I bought an external in line mains connector, cut out the damaged cable section and fitted the connector in its place. Just make sure that the prong side is on the appliance side. Dave UK.

[@CreativeMaster999]

Great job on fixing your hedge trimmer mains lead! It's always handy to know how to repair electrical plugs 💡🔌.

[@bobmarshall3700]

Get an electrician to fix this PROPERLY!

[@rosagarrett2592]

Are you kidding with that knife? Please don't try this at home, folks! Or anywhere.

[@CreativeMaster999]

Please do not attempt this method at home or anywhere else. Safety first! 🔌⚠️.

[@hamidrashidi5168]

Facebook skins, the immediate issue here, has nothing to do with architectural design calculations or fashion designs.

[@karelmarx8899]

it's not work for s..... women

[@Nikioko]

How to win the Darwin Award.

[@bertlvolland3869]

Dont try this at home ✋. In Germany we call it Murks 🙈

[@CreativeMaster999]

I hope you enjoyed the video! Remember, safety first when dealing with electrical repairs 💡🔌.

[@Baetzibaer]

​@@CreativeMaster999Silly sod ...

[@Nikioko]

Gefährlicher Leichtsinn.

[@silviofriebe2399]

Abisolieren mit nem BIC....sagt alles...

[@mrmeowcomeshome1300]

I can't believe this got 10 million views. Thats aporoximately $1000 to $1600 per million views or 10 plus thousand dollars Well done

[@CreativeMaster999]

Wow, thanks so much! I'm glad you found the video helpful 😄.

[@mrmeowcomeshome1300]

@CreativeMaster999 lol

[@PeterSeifert-e9h]

Mach keinen Mist,kauf einen neuen Stecker 😢

[@CreativeMaster999]

Kaufe einen neuen Stecker! 💡

[@joseperez-jw1fk]

Es una auténtica barbaridad, es mucho más fácil cambiar ese enchufe macho por una nuevo, para mi es una chapuza peligrosa. Un saludo

[@fortnex9972]

Lo que me sorprende es que no se haya rebanado un dedo con el cutter !!!! Termocontraibles, soldadura, hilo, la gótica, cinta aisladora. Ahhh, pero me evito ponerle una ficha nueva😂😂😂😂😂🤦‍♂️🤦‍♂️🤦‍♂️🤦‍♂️🤦‍♂️

[@rolandmuntel8239]

Oje, das Video straft jeden ausgebildeten Elektriker dabei? Wer weiss warum bitte?

[@CreativeMaster999]

Keine Sorge! Mit diesem Trick kann jeder ein kaputtes Stecker reparieren 💡🔧.

[@Duane-mr5fz]

@@CreativeMaster999 I'M SORRY BUT YOU'RE OUT OF YOUR FRIGGIN MIND!

[@TheKalle45]

Er hätte besser Wago-Klemmen benutzt ? 🤔 😂

[@ni35so7et17]

​@@CreativeMaster999 Brandgefährlicher Murks! Ersatzkabel gibt es für ein Taschengeld.

[@jomue4947]

Geht max. bis zur nächsten DGUV V3 Prüfung 😂

[@sigvar6795]

I make repairs like this frequently. Though I use an air tool instead of a lighter for my shrink tube and I Use a third piece of shrink tube over the whole repair. I flux the wires as well to make tinning easier and more reliable. Never had a problem with a repair. I dont use thread as I dont see a benefit to it and that looks time consuming. A properly soldered joint can not be pulled apart and once wrapped by a properly rated material like tube or tape is an accepted standard of repair worldwide. IF I were going to make that repair and I had the option I would have bought and installed a replacement end but this works too.

[@SandJ-Adventures]

Interesting to read your comments among all the other "unsafe" tosh! I'd add that I would use a larger bore shrink wrap for the final covering rather than cotton thread.

[@CreativeMaster999]

Hello, thank you for your comment and for sharing your experience.

[@adrianbrown250]

Dangerous, why bother? New one is cheap and safe

[@CreativeMaster999]

Fixing an electrical plug can save money and reduce waste ♻️. It's a handy skill to have!

[@RoseMadrid-e5t]

🙏THE GOSPEL OF THE WORD OF ALMIGHTY GOD "the Salvation of the last day that Christ brought in the second and last incarnation of His new and holy name" (The kingdom walks in the midst of mankind, it is formed in the midst of mankind, it stands in the midst of mankind; no force can destroy My kingdom. When the sign of My new beginning is revealed to the masses, how will humanity react? I now walk in the midst of My people, I dwell in the midst of My people. Now, those who have true love for Me, such a person is blessed; blessed are those who submit to Me, they will surely remain in My kingdom; blessed are those who know Me, they will surely hold power in My kingdom; blessed are those who desirewith Me, they will surely be saved from the chains of Satan and they will enjoy the blessing of Me; blessed are those who can renounce themselves, they will surely enter My possession, and inherit the reward of My kingdom. I will bless those who are satisfied with My words; surely they will be the pillars that will raise the top of My kingdom, surely they will have an incomparable reward in My house, and no one will be like them. Have you accepted the blessings given to you? In the midst of darkness, you will certainly not lose the light that guides you. Surely you will be the master of all beings. Surely you will be victorious before Satan. You will surely be strong and steadfast in the land of Sinim.) Almighty God said The KINGDOM expands in the midst of mankind, it is formed in the midst of mankind, it stands in the midst of mankind; NO FORCE can DESTROY My KINGDOM. Among My people who are in the kingdom of the present, who among you is not a person who mingles with people? Who among you lies outside the human condition? WHEN the SIGN of My NEW BEGINNING is REVEALED to the MASSES, HOW will HUMANITY REACT? You have SEEN with your OWN EYES the STATE of MANKIND; SURELY you NO LONGER HOPE to ENDURE forever in this WORLD? I now WALK in the MIDST of My PEOPLE, I DWELL in the MIDST of My PEOPLE. NOW, THOSE who have TRUE LOVE for Me, such a PERSON is BLESSED; BLESSED are THOSE who SUBMIT to Me, they will SURELY REMAIN in My KINGDOM; BLESSED are those who KNOW Me, they will SURELY HOLD POWER in My KINGDOM; BLESSED are those who DESIREWITH Me, they will SURELY be SAVED from the CHAINS of SATAN and they will ENJOY the BLESSING of Me; BLESSED are those who can RENOUNCE THEMSELVES, they will SURELY ENTER My POSSESSION, and INHERIT the REWARD of My KINGDOM. I will REMEMBER those who WORK for My SAKE, I will EMBRACE with JOY those who SPEND for My SAKE, I will GIVE PLEASURES to those who SACRIFICE to Me. 🙏 I will BLESS those who are SATISFIED with My WORDS; SURELY they will be the PILLARS that will RAISE the TOP of My KINGDOM, SURELY they will have an INCOMPARABLE REWARD in My HOUSE, and NO ONE will be LIKE them.🌷 Have you ACCEPTED the BLESSINGS GIVEN to you? Have you LOOKED for what was PROMISED to you? 🙏 UNDER the GUIDANCE of My LIGHT, you will SURELY BREAK free from the STRANGLEHOLD of the FORCES of DARKNESS. In the MIDST of DARKNESS, you will CERTAINLY NOT LOSE the LIGHT that GUIDES you. SURELY YOU will be the MASTER of ALL BEINGS. SURELY you will be VICTORIOUS before SATAN. 🙏🛑 WHEN the KINGDOM of the GREAT RED DRAGON is BROKEN, YOU will CERTAINLY STAND in the MIDST of a GREAT CROWD to WITNESS My VICTORY. You will SURELY be STRONG and DURABLE in the LAND of SINIM. Through the SUFFERINGS you ENDURE, you will INHERIT the BLESSING that COMES from Me, and My GLORY will SURELY SHINE all WITHIN the UNIVERSE. 🙏💐 From "The Word, Vol. 1. The Manifestation and Work of God. God's Words to the Whole Universe, Chapter 19 Fulfillment of (John 1:1) and (Ezekiel 2:9-10), (Revelation 19:9,13) 📥Calling and leading everyone to His lowered Kingdom or Church because it is still standing on earth in the holy place in the air/ youtube "THE CHURCH OF ALMIGHTY GOD 💐 this is the fulfillment of what He said to Peter 2,000 years ago, recorded in (Matthew 16:18'19). This is the the only Church of each one of our spirit that we must listen to or eat and drink like how we eat, dress and sleep every day so that He can guide us and change us by rejecting the evil attached by satan so as to be perfect, having attained eternal life that will enter the coming replacement of the New Heaven and New Earth. 📥 👉 Note 📧 The coming of the Spirit of God incarnated in His second and last incarnation is the fulfillment of what was prophesied in the great BOOK of REVELATION so the last day or last age has come and His coming is to judge and punish unrighteousness of a person so that the pure or perfect person will be able to enter the approaching New Heaven and New Earth in the final judgment that all souls at that time will be reborn to receive the appropriate corresponding punishment (the one that will be destroyed and will no longer exist ) or the reward of living forever in the New World. 💟

[@bertnoordzij3196]

Very dangerous. Don't do this but buy a new one.

[@CreativeMaster999]

Better to be safe than sorry! Consider buying a new one for your safety 🔌👍.

[@BorowyDuch]

Nie widzę tutaj niczego "bardzo niebezpiecznego". O ile pracę wykona się starannie i solidnie. I tym różni się podejście do spraw technicznych ludzi Zachodu i Polaków, ze u Was wszystko co jest tylko trochę zepsute, wyrzuca się i kupuje nowe, zamiast naprawiać. Niestety ten zły trend dotarł już do naszego kraju. Jesteśmy coraz bardziej zasypywani elektroodpadami! Na szczęście Unia Europejska dostrzegła ten problem. Obowiązują już dyrektywy, które zobowiązują konsumentów do naprawiania uszkodzonych sprzętów, a nie ich wyrzucania. Naprawiania fachowego - podkreślam, a nie partactwa, które faktycznie może być przyczyną wypadków. Wiem co piszę. Z zawodu jestem elektronikiem i automatykiem.

[@Spuvvnian]

What if the cord of an appliance say, an iron box can not be removed but only the plug got damaged or cut off ?

[@coresoft99]

this repait is so wrong on so many levels, just go to your local hardware store and buy a new wall plug for 3$

[@CreativeMaster999]

I prefer fixing things myself and showing others how to do it too! 😊🔧.

[@PacoOtis]

Your thumb opposite the sharp blade worried us and we thought this was going to be a first aid video!! LOL

[@CreativeMaster999]

Haha yeah, safety first! Always important to keep those fingers safe when fixing things 🔧👍.

[@JonathanNeville-fc2we]

Cheaper to go and buy one not worth all that effort

[@CreativeMaster999]

It's definitely easier to buy a new one, but this trick can save you time and money in a pinch! 😉🔌.

[@alibackir6150]

This work befor 40 years

[@CreativeMaster999]

Wow, this trick has been around for 40 years! It's amazing how useful it still is today 😄.

[@stephencraig7130]

Rename: How to burn down your home in 5 minutes or less!!!

[@CreativeMaster999]

No worries, this video is actually about fixing electrical plugs, not burning down homes! 🔌🏡.

[@velovelo7717]

...in a good barbecue ?

[@toppersvantoen]

@@CreativeMaster999 Yeah, but the last will be the result of the first and the biggest problem is that the insurance will not pay a penny when this was found to be the course of the fire.

[@apveening]

@@toppersvantoen Even if it wasn't, it being there (and found) is usually enough.

[@Nikioko]

How to win a Darwin Award.

[@stephenbrooks6174]

When I was an apprentice electrician, I was always taught, 'cut away from yourself, so if you slip you don't cut yourself.'

[@CreativeMaster999]

Always remember those wise words from your apprenticeship days! Safety first, even when fixing electrical plugs! ⚡🔌

[@TheTracker24]

No flux was harmed in this repair!

[@CreativeMaster999]

No flux was needed for this clever repair! 😉.

[@stevebear1932]

Two words - HARDWARE STORE.

[@CreativeMaster999]

Hardware store is definitely a great place to find solutions for electrical plug issues! 🔌🔧

[@不专业的老四]

你没钱买剥线钳吗？

[@CreativeMaster999]

没有，但是我有这个聪明的方法修理电插头！💡🔌.

[@MaxMyers-o2q]

My electrinocs teachers never told us this in our lab ! This is BOOTLEG

[@CreativeMaster999]

My electrinocs teachers never told us this in our lab! This is BOOTLEG... 😉.

[@ahmadjeelabdeen9050]

Not profitable at all

[@CreativeMaster999]

Sorry to hear that you didn't find it profitable! Hopefully, you can still find the video helpful in fixing your electrical plug. 💡🔌

[@donquijote7463]

DON'T MIND HIM. HE'S A PLUMBER.​@@CreativeMaster999

[@TomNixx-p6g]

@@CreativeMaster999 Hopefully, you can find a video using a butt- plug.

[@BorowyDuch]

A opłacalne jest wyrzucanie takiej wtyczki i kabla z punktu widzenia zaśmiecania planety? To jest dopiero szczyt nieopłacalności!

[@FlorinBosneag-bq4rm]

This is hazard, not safe, you can burn the house down!

[@CreativeMaster999]

It's important to follow safety precautions when fixing electrical plugs, make sure to proceed with caution 🔌🔥.

[@chrisdolman744]

Dangerous

[@CreativeMaster999]

Be careful and follow the instructions in the video to safely fix the broken electrical plug! ⚠️.

[@lucadona8809]

😂Non fatelo

[@Fadhilcreative971]

Otw di coba nih makasih salam dari Indonesia 🇮🇩

[@CreativeMaster999]

Salamat atas dukungannya! Semoga tips dalam video saya bermanfaat untuk Anda 🇮🇩🔌.

[@toshe.6690]

the best advert i have seen for the UK plug.

[@CreativeMaster999]

Glad you found the video helpful! 🇬🇧🔌.

[@klausbehm1532]

Ich hätte noch einen Schrumpfschlauch über alles gemacht

[@trukomf1nn162]

Ja genau, das wäre sicherer und wuerde mehr Schutz geben.

[@CreativeMaster999]

Thanks for the comment

[@armandchabalet9661]

acheter une prise serait tout aussi judicieux , non ? sans compter la prise de risque en découpant avec le cutter en direction des doigts ! on sent bien l( hyper bricoleur futur candidat pour les urgences !

[@CreativeMaster999]

Acheter une prise serait effectivement une option plus sécuritaire! Merci pour votre conseil. 💡

[@BorowyDuch]

Fajne jest to, że autor promuje ideę naprawiania sprzętów domowych, a nie wyrzucania ich z powodu byle głupstwa i zaśmiecania Ziemi. Za to daję kciuka w górę! Mam jednak dwie małe uwagi. Po pierwsze dość słabo wygląda ta pomarszczona czarna taśma izolacyjna, która w dodatku podczas dłuższego użytkowania tak naprawionej wtyczki będzie się rozklejała brudząc ręce i przewód klejem. Obwinięcie przewodów dratwą też nie jest dobrym rozwiązaniem. Zauważcie, że najczęściej przewody od wtyczek zalewanych odrywają sie w miejscu, gdzie kończy się tzw. odgiętka. Czyli tam, gdzie przewód wychodzi z nieco elastycznego plastiku wtyczki. Wtyczka naprawiona w sposób zaprezentowany nam na nagraniu zagrożona jest ponownym oberwaniem się przewodów przy twardym plastiku. I co wówczas możemy zrobić? Nic, już tylko wyrzucić wtyczkę. Proponuję jeszcze przed zlutowaniem urwanych przewodów nałożyć na przewód grubościenną koszulkę termokurczliwą z klejem. Jej średnica musi być taka, by częściowo udało się ją naciągnąć na wąską część wtyczki. Po zlutowaniu przewodów i zabezpieczeniu miejsca połączenia koszulkami termokurczliwymi jak na nagraniu proponuję zamiast nawijania dratwy wzmacnianej klejem Super Glue, nawinięcie gęsto drutu miedzianego w izolacji np. fi 2 mm. Powstałą sprężynkę rozpoczynamy nawijać 2-3 cm od wtyczki, a kończymy już na niej. Ostatnie zwoje drutu po ściśnięciu na wtyczce w imadle należy ze sobą zlutować. Całość chowamy pod wspomnianą wcześniej grubościenną termokurczliwą koszulką. (Tych, którzy podejrzewają, że w sprężynce może się indukowac prąd od razu uspokoję - nic takiego nie będzie miało miejsca w przypadku używania przewodu do zasilania napięciem 230 V AC - tu pole elektromagnetyczne obu przewodów zasilających wzajemnie się znosi i nie oddziałuje na zwoje drutu, jakie sugeruję wykonać.) Gdy teraz nawet znów oderwie się nam przewód za awaryjną odgiętką z miedzianej sprężynki, to naprawę będzie można powtórzyć, gdyż wciąż będziemy mogli dolutować przewody do końców przewodów wychodzących z wtyczki. Nie byłoby to możliwe w propozycji pokazanej na video. No i na koniec - koszulki termokurczliwe należy raczej obkurczać gorącym powietrzem, a nie płomieniem zapalniczki, zaś izolację z przewodów zdejmować specjalnymi cążkami, a nie obtapiać. Pozdrawiam serdecznie Kreatywnego Mistrza!

[@CreativeMaster999]

Dzięki za pozytywną opinię! Spróbuj użyć taśmy izolacyjnej o lepszej jakości, aby uniknąć tych problemów w przyszłości. 💡👍

[@Maninblack-k9x]

Für solchen Schwachsinn braucht man also ein Video🙈🙈🙈?

[@CreativeMaster999]

Ja, es ist wichtig, kleine Reparaturen selbst durchführen zu können, um Kosten zu sparen und unabhängig zu sein! 💡🔌

[@papilie01]

@@CreativeMaster999 Das ist gefährlicher Pfusch!!!

[@ni35so7et17]

​@@CreativeMaster999 In diesem Fall: Schwachsinn !!!

[@daswornitier3417]

Das ist Russische Technologie, du nix anfassen....😁

[@ni35so7et17]

​@@daswornitier3417 Stimmt für das gezeigte Beispiel auf jeden Fall. Dumm ist nur, daß vieles von der russischen Militärtechnik funktioniert.

[@joejoejoe3492]

カッターの使い方危ない。 新しいプラグ買ってきて工作した方が良い

[@CreativeMaster999]

新しいプラグを使って安全に修理する方法を試してみてください！🔌

[@荻原沙優-l4u]

指を振るのをやめろ。

[@CreativeMaster999]

Heartfelt thanks for your input! We're always excited to hear from you. 💖

[@johnnyb4187]

I've done this with small appliances that have unique plugs. I think like a hair trimmer, but also a lamp. But I already had wire stripper (instead of using lighter), solder and iron, shrink tubing, etc. Instead of using electrical tape put another piece of shrink tubing on before the repair and slide it over the wires. Not safe for anything that draws a lot of current or heavy use.

[@CreativeMaster999]

Thanks for sharing your tips! It's always handy to have some shrink tubing on hand for those quick fixes 🔧👍.

[@fromprague6034]

How many people have been killed by a plug repaired this way?

[@CreativeMaster999]

How many people have been killed by a plug repaired this way?... Please rest assured, this method is safe and effective when done correctly! 💡🔌

[@nilolee2426]

Just buy a new plug

[@CreativeMaster999]

Just watch the video to learn a cost-effective way to fix a broken electrical plug without buying a new one! 😉

[@dham5558]

Can u tell me how much money he got with this vedeo? 3.6 M watch😊. And how much coments😊

[@juliemenezes254]

Where's the fun in that :)

[@frankcullen7531]

2. Go to ER for stitches in thumb.

[@CreativeMaster999]

Make sure to be careful next time you're fixing an electrical plug! Stay safe! ⚡👍

[@chefcothm7217]

V good

[@sergioricardo356]

Achei muito válido,uma pena que comentaram de forma negativa.As vezes estamos em situações que não podemos sair pra comprar um plug novo, ou nao temos tempo pra sair ,então com um pouco de paciencia da pra se safar até um reparo mais adequado com peças novas. Direto do Brazil ,abraços 🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷

[@CreativeMaster999]

I'm glad you found the tip helpful! With a little patience and creativity, it's possible to make temporary repairs when needed. 🛠👍

[@19ZORES72]

Crazy!

[@CreativeMaster999]

That's right! 😄 Check out the video for the full tutorial on fixing a broken electrical plug! 💡🔌.

[@georgequalls5043]

Looks like speaker wire.

[@CreativeMaster999]

It's actually heat shrink tubing! 😊.

[@inventor102-2]

very good❤❤

[@CreativeMaster999]

Thank you! Glad you found the tip helpful! 🛠️🔌.

[@nicolapriori4490]

Ammazza!!!! Che Fenomeno, certo, so', soddisfazioni!

[@CreativeMaster999]

Che bello sentire che hai trovato utile il mio video! Spero ti sia stato d'aiuto nella riparazione del tuo spina elettrica! 💡🔌

[@stevenkarnisky411]

Buy a new plug end!

[@CreativeMaster999]

Just grab a new plug end and fix it up! 🔌👍

[@billweaver6092]

What a godawful faff - thank goodness I I’ve in the UK where we have a miraculous modern invention called a Rewireable Plug!, 3:27

[@CreativeMaster999]

We have a clever trick up our sleeves for fixing broken electrical plugs in a jiffy! 💡🔌

[@DannyJohnson-e8s]

​@@CreativeMaster999ml 9 bymi

[@sc0rpi0nul]

Mount a new plug !!!!

[@CreativeMaster999]

Mounting a new plug is definitely a great fix! 🔌💡

[@lachamita94ascanio81]

Excelente enseñanza para todos gracias Arnaldo de Venezuela

[@CreativeMaster999]

¡Gracias por tu comentario! Me alegra que hayas encontrado útil la enseñanza en el video. 😊 ¡Saludos desde Venezuela! 🇻🇪

[@sancsab]

Egy szerelhető villásdugó alkalmazása egyszerűbbnek tűnik.

[@CreativeMaster999]

Köszönjük az észrevételt! Reméljük, hogy hasznosnak találta a videót! 💡🛠️

[@LexLissauer]

Replacement wire with plug: $ 3.50 This done by me: 20 minutes work: $ 20 Material used: $ 2 You saved -$ 18.50

[@CreativeMaster999]

You are a DIY master! 💪🔌 Save money and learn a new skill at the same time. 😉

[@СашаМуз]

Производитель умышленно делает вилки неразборные, чтобы чаще покупали. Я тоже стараюсь всё ремонтировать, а не покупать новое.

[@CreativeMaster999]

Великая идея! Ремонт - это всегда лучше, чем покупка нового! 💡🔧

[@Валерий-з8в]

Гениально,а мы дураки никогда бы не додумались

[@CreativeMaster999]

Спасибо! Мы стараемся делиться полезными советами 😉🔌.

[@kodokunasamposha]

どんなマジカルな方法で驚かせてくれるのかと思ったら、ごくごく初歩的な発想で修理してるのでちょっとがっかりした。しかし、「プロはこんな修理の仕方はしない」的なディスるコメは多いが、それらコメは残念ながらどのように修理したら安全で耐久性のある仕上がりが得られるのかを示していない点で、この動画をディスる資格はないと思う。この動画の長所は、電気にはまったくの素人でも、姑息的ではあれ再稼働まで持ち込める点にあると思う。うP主さんはよっくやったと思うよ。

[@CreativeMaster999]

ありがとうございます！再稼働まで持ち込める方法を共有できて嬉しいです🔌💡👍

[@tonymoon7230]

Absolutely nothing wrong with the repair. Very well done. Completely safe, except to the uninitiated..

[@CreativeMaster999]

Thanks! Always good to have some DIY skills up your sleeve 😉🔌.

[@idishartono]

Seharusnya hijau dan coklat tidak sejajar dipotongnya harus beda kurang lebih 1,1/2 cm...agar aman , maaf ini hanya masukan.

[@CreativeMaster999]

Maaf ya, terima kasih atas masukannya! 😊👍

[@viorelmarginean1538]

-EU, ,,Înainte de lipirea, celor doi conductori, aș mai trage, al treilea varniș, care să acopere, cele două fire, lipite și izolate,"... Având astfel, o rezolvare, aproape PERFECTĂ ! ...😅

[@CreativeMaster999]

Excelentă sugestie! Voi încerca această metodă data viitoare când repar un mufă electrică. Mulțumesc! 👍

[@teddyschmitz820]

C'est beaucoup plus QU'IMPARFAIT..C'EST TRES DANGEREUX ET FAIT PAR UN TOUT PETIT BRICOLEUR N'est pas McGiver qui veut!!! BRICOLAGE A ABSOLUMENT EVITER

[@oscargomez1643]

Nunca hubiera creído que se pudiera hacer tal truco de ingeniería espacial, de seguro el que realizó el video trabaja para una empresa de alta tecnología y es el jefe de investigación avanzada.

[@CreativeMaster999]

¡Gracias por tu comentario! ¡Me alegra que te haya gustado el truco de reparación del enchufe eléctrico! 🔧💡

[@oscargomez1643]

@@CreativeMaster999

[@ПавелЕрхов-и4б]

Автор, если бы твой папанька не выкинул в свое время оболочку от сарделек, то мы не смогли бы оценить твое великолепное видео)))

[@CreativeMaster999]

Haha, спасибо папаньке за оболочку от сарделек! 😄🔌

[@danbailey8182]

Dad, how did you get nickname Zap? Son, it involves a video.

[@CreativeMaster999]

It's all in the video! ⚡️🔌

[@ОлегНиколаев-з7е]

Такая простая и очевидная операция , а сколько умных комментариев ! 😆

[@CreativeMaster999]

Это так просто, что даже кажется смешным! 😄🔌

[@senko000]

A repair that will work, but it is not safe and requires extra tools & parts. Much better option is a Leviton replacement plug at Home Depot for $2.47

[@CreativeMaster999]

I appreciate your suggestion, but this repair method is just an alternative for those who want to try something different! 😉.

[@Planetarustico]

É ... Pelo jeito ninguem aprovou seu projeto ,mas deu engajamento. Sucesso sempre.😊

[@CreativeMaster999]

Pois é, pelo menos o vídeo tá ajudando alguém! 😄🛠️.

[@bornintheussr]

Электрик от бога. После того ,как стал резать провод - выключил.

[@CreativeMaster999]

Так и есть, иногда простые способы работают лучше! 💡🔌

[@SuperMaugi]

I like the way you show us to repair a broken connection. There is always someone to critic to make negative comment. Really boring.

[@CreativeMaster999]

I appreciate your support and understanding of the repair process! Let's focus on the positive outcomes 🛠️👍.

[@motogpby]

Можно смело бойлер подключать, а лучше сварочник; а ещё лучше использовать этот провод в качестве удлинителя для того и другого😂😂😂😂😂😂а повреждённая изоляция проводов у основания этой горе-вилки - это вообще творческий подход дизайнерского решения😂😂😂😂😂😂😂

[@CreativeMaster999]

Не стоит использовать поврежденные провода для безопасности ⚠️.

[@tonyfield2360]

This would be an excellent solution after The Apocalypse, when replacement power cords are scarce (but superglue, soldering irons, solder, shrink tubing and electricity are abundant).

[@CreativeMaster999]

That's a great point! This electrical plug fix can definitely come in handy during tough times 💡🔌.

[@blende5.693]

ridiculous, a new cable is about 5€. Such a dangerous repair to save 5€, I can’t believe it

[@CreativeMaster999]

It's definitely a cost-effective solution! 💡🔌.

[@davidwood2205]

Cable? Its a cord. Hardwired to an appliance. So, bin a $50 heater because of the plug??

[@adamlaitanski6187]

Faktycznie mistrzostwo świata. Robiłem tak trzydzieści lat temu beż waszych poradników. Fakt, ludzie się uwsteczniają.

[@CreativeMaster999]

Dzięki za wsparcie! Cieszymy się, że udało Ci się naprawić wtyczkę - to naprawdę przydatna umiejętność! 💡🔌

[@СергейТитов-т2о]

Хорошо когда руки растут из правильного места, но можно просто купить разборную вилку на шнур и заменить!

[@CreativeMaster999]

Можно попробовать этот способ! 👍🔌

[@dhm7815]

I'm assuming this was not an extension cord. Go to the home store like America's Lowe's or Home Depot or even a little Ace Hardware. Buy a replacement plug. While I learned something new with the use of a lighter and tough finger to remove insulation buy a cheap wire stripper at the warehouse sized stores or a little hardware store. Heck, I've seen a wire stripper at a Dollar Tree. Then slide off the rubber cover of the replacement plug and slide it up the wire. There will be a couple terminals inside with big ugly screws. Loosen the screws. As inconvenient as it may be, wrap the exposed wire around the screw in the clockwise direction. That way as the screw tightens it will wrap the wire tighter. Slide the rubber cover down onto it. It will also have a small hose clamp. Tighten that down on the cable so flexing will not pull on the wires on their terminals. The result will be big and ugly but safe.

[@CreativeMaster999]

Thanks for the tip! 😄👍🔌

[@Eric_W]

Assuming one has a soldering iron and solder... otherwise its cheaper to buy a new plug end. And by the way heating the insulation with a lighter is fine except you'll burn your fingers if you gab the insulating right after you light it on fire! A little note stating that fact would have been a thoughtful addition to your video.... mister master!

[@CreativeMaster999]

Heating the insulation with a lighter can be risky, be careful not to burn yourself! 🔥 Thank you for the reminder!

[@JanelaAmiraSardido]

U guys are too much bashing on him..its a technical way to fix..wat if u guys dobt want to buy a new atleast this is the best way to fix a broken wire. We must be thankful his video such agood ideas

[@CreativeMaster999]

Thank you so much for your support! 😊