Creo Parametric - Drawing Bills of Material (BOMs) | Tutorial

[@MARIUSZSPQR]

I have not seen a better video instruction how to prepare my own BOM. Thank you very much, Mr. Dave

[@CADPLMGuy]

Thanks! I'm glad to hear that.

[@Shhhpablo]

You are the best men! Thanks a lot, i need a while to watch all your videos, but i will!

[@CADPLMGuy]

There's over 600, so that might take a while :-)

[@alfredocordero4984]

Because sometimes I can't generate balloon notes in representations or in detail views?, I can only do it in the isometric view, thanks for your contribution.

[@jamesfranklin7622]

Well done sir!

[@CADPLMGuy]

Thanks, James!

[@jamesfranklin7622]

@@CADPLMGuy your welcome, you've helped me get through a lot of work seemlessly, so I say ...keep it up and keep'em coming! 🙏

[@SadhguruTimeYoutube]

It's a nice video. Step by step clear instruction. I have a doubt. I want to arrange my bom table as per the description. For example, my assembly has different type of spring. i just want to keep all these spring in one place in the table. How do we do this in Creo. Please help me regarding this. i want to move all fasteners also in one place. Thank you.

[@CADPLMGuy]

Use Filters. I show that in the BOM video on Bulk Items.

[@SadhguruTimeYoutube]

@@CADPLMGuy Nice tip to get the result i was looking for, i just saw bulk item video. Thank you for that. But is this the only way? can't we do this within one repeat region using sort region?

[@marymccormick7806]

When you are adding the equation for Total Weight... or any equation, open "local parameters" and type parameter JUST like it is stated here. This is explanation why there are underscores vs dot.

[@abdulaziza]

Very useful, Thank you so much,,

[@MotoScootMech]

super helpful thank you!!

[@Bruno_MECL]

I need replace the .asm file on 2D drawing. Is it possible?

[@cheenu1965]

EXCELLENT

[@CADPLMGuy]

Thanks!

[@bonwookoo9074]

Wow, that's good information. Thank you.

[@CADPLMGuy]

Thanks for watching and the compliment, Bonwoo.

[@yousefabdelsamie5983]

Thank you for the video In my assembly I have several masses set to different units Is there a way of displaying asm.mbr.Pro_MP_Mass to one unit Or at least get the unit of the pro_mp_mass without having to set a relation for each part individually This will really help!! Thanks in advance

[@CADPLMGuy]

The mass properties should be reported in the assembly's units.

[@lomvartus]

Hi there. You mention in this video that you refer elsewhere how to define the PRO_MP_MASS. Can you put the link of that video, in the description?

[@CADPLMGuy]

See my video on Mass Properties.

[@RoyWickrama]

Thanks a lot for your excellent instruction video(s). For the applicable parts, I am interested to incorporate say length, width and thickness (height) data to appear in the description column in BOM,. Could you help, please. I usually do "= x x LG." Still, I could not get around this. I appreciate your help.

[@CADPLMGuy]

If you just want to have that appear in a BOM cell, I would probably do that with a Report Relation.

[@vickyoo5]

@@CADPLMGuy hi for qty the numbers are not showing what would be the problem

[@CADPLMGuy]

@@vickyoo5 As I show in the video, you have to change the attributes of the Repeat Region.

[@vickyoo5]

@@CADPLMGuy sorry for not mentioning this before...but I did repeat region as you shown in your video even after that it's not showing ...also I tried in another pc the result is same

[@Intherescu]

Can the "Paginate" command split a table where the Repeat Region was not applied?

[@mahmoudibrahim5556]

Hi, thank you Dave for your amazing videos, I'd ;like to ask you if there's any document or appendix that I can use to search any BOM parameter?

[@rajeshds1410]

Thanks for video But how to include length width and height of model in BOM which is very much important Please get back with the video

[@mechengineer8312]

Pls share some of creo models for sample trial. If you have this assembly pls share gdrive link. I need this assembly.

[@mydesigncentreindia]

I have entered exactly all the things but the weight of the part is not showing, please suggest to me what are the possible reasons.

[@marcelvanvilsteren4826]

I m looking for a method to add empty lines in a BOM. Can you tell me whether or not that exists?

[@CADPLMGuy]

Not that I'm aware of. But more important question, why do you want blank lines in a BOM?

[@yousefabdelsamie5983]

Is there a way to filter hidden parts in model tree from the BOM?

[@CADPLMGuy]

See my video on Simplified Reps and BOMs.

[@motamarriramanjaneyulu9920]

I am not getting actual path of the exploded lines Sir.

[@joohomie]

7:25 bom relation

[@cokcury]

can we export bills of materials to excel directly from assembly . without doing drawing tables in any of the creo versions. without EMX extension..

[@CADPLMGuy]

You can export the Product Structure to Excel in Windchill. You used to be able to export to CSV from Pro/REPORT but I believe that module has been deprecated.

[@cokcury]

@@CADPLMGuy i dont have windchill interface licenced in my company

[@shashankpotbhare2600]

can you give information about gd&t symol used to crio parametric urgent 😊😊😊😊😊😊😊😊

[@CADPLMGuy]

I don't understand your request.

[@adhithasimhanraghavan7516]

@@CADPLMGuy He's asking for Geometric dimension and tolerance

[@CADPLMGuy]

@@adhithasimhanraghavan7516 I have videos on GD&T. I still don't understand the specific request. kzbin.info/www/bejne/bHfNd6Wuitx1jrs

[@eamonahern7495]

What if you want grams and kilograms?

[@CADPLMGuy]

I don't understand your question.