How To Repair A Cold Spark Machine (CryoFX® Cold Spark Machine Repair)

[@Cryofx]

Thanks for watching! Comment questions and we will be sure to answer them! More info available here: CryoFX.com

[@DJSpoon318]

Thank you so much for this video. Your instructions and trouble shooting helped me fix my JMAZ Firestorm F3 that was not working. It was actually the belt was not turning and just need to be cleaned good. Thanks again.

[@timbrownproductions11]

Great Video!! Really informative and it helps to see the unit unboxed.

[@jodasingh2345]

VERY HELPFUL!!! This video was a life savor for me!! Thanks for sharing and making videos!!

[@Cryofx]

Thank you. More to come!!

[@davidchamberlain3838]

Very helpfull thank you for sharing such a good video .. manufacturers should hire you to do there videos on maintenance ... well done .. needed info for 2 of my cold spark machine ... and i think by looking at this i see what could be the issue but didnt know we had to clean them like this 😂😂 like i sais very usefull information

[@bidon7701]

I'm just curious about the temperature of the heating element. Can you tell us ?

[@chorizogrande8340]

Can you tell me where can I get a replacement heating element from?? I have the vevor 700w machines, thanks 😊

[@Cryofx]

Yes, CryoFX sells heating elements for the machines, as well as other spare and replacement parts: CryoFX.com and search "spark" Heating element www.cryofx.com/cold-spark-machine-heating-element-cold-spark-fountain-heating-element.html

[@DavidGrinham-l1q]

Hello - Do you have any ideas as to why powder ( sparks) will be coming out in clumps when the unit is activated with remote - showven mini sparkular - medium powder

[@gabrielchdj7852]

tengo unas que si conecto mas de 2 hace saltar la terminaca, si pongo 2 hay veces cuanto estan calentando salta, vuelvo a subir la termica y andan sin problema, que puede ser?

[@roman25610]

why is the green ice on the panel flashing? but the external control shows that everything is working ok - but the machine is not working?

[@jeromeo6911]

My machine stays on the warming up mode. I can only assume the heating element is bad. I can't find where to buy the part. Any guidance would be appreciated

[@oscarmendoza8760]

My machine keeps having a E4 time error. How do I resolve

[@bryanaguilar6966]

What if we insert the granules in the hole where sparks fly out? Had this happen today

[@TeyYoung]

did you ever figure that out? I'm having that problem sadly lol

[@leidyjohanaestradapalomo6903]

Hola saludos una de mis vevor no enciende que debo hacer solo se ve rojo e boton de encendido y apagado Alguna solución?

[@rggila1955]

how can I contact You guys ? I have 4 Cold Spark Machines I think the motherboard might be the issue. Basically They are brand new maybe used 7x. They heat up and go off without me pressing the button on the remote but not always.

[@rentalsoundsystem8440]

HELLO! We also have a problem with this model! E4: TIME ERROR appeared Can you help us how we can solve this error? thank you very much !

[@noeibarra8610]

I’ve used my machines a few times. They are fairly new. But they have a hard time heating up and don’t heat up to 500 like they should. You think it’s the heating element?

[@mvick21385]

The gears make a lot of noice. Anyway to fix that? Or can u use a lil grease?

[@jacobjimenez6205]

My cold sparks are coming out of the little hole on the heating element do you know why or how I can fix it?

[@noeibarra8610]

Is there a certain temperature I should turn it off?

[@VIDEOSPACHANGA]

Is there a site I can order parts from? The heating element on mine doesn't work anymore.

[@mjeevents2758]

Following

[@kvnkrz271]

your supplier is your best bet! Do you have the same machines as in the video?

[@Cryofx]

www.cryofx.com/cold-spark-machine-heating-element-cold-spark-fountain-heating-element.html

[@rylightbourne]

Hello, my machine keeps saying error 5 we think it’s the temperature sensor. Can you help?

[@19Jose91]

Yo guys, my sparks maxhines dont seem to suck the powder, but the mechanism works perfectly, I feel like the powder is wet and it’s not flowing as it should be.. but I opened a 2 sealed bags already and same.. any ideas??

[@torireigle4623]

One of my machines keeps tripping the breaker… HELP

[@djkaz4289]

Is there a quick way to test the heating element with a multimeter? My machine is not heating, but I do not believe the heating element has gone out it shows just under an ohm resistance. If the heating element was bad I would assume that it would show open. Also what should the voltage be running to the heater? I am reading anywhere from 3 to 6 volts running to the heater but no more. This is a vivor brand spark machine and I would assume that the voltage going to the heater is reduced somewhat because the wires going from the main PCB to the heater PCB are fairly light. I hope that you are able to assist, thank you!

[@silverfoxproductions6923]

I have the same issue from Vevor with 2 fixtures! It won’t heat above 200°F. Do you have a solution?

[@djkaz4289]

@@silverfoxproductions6923 My issue was the control board. I was able to find control boards on aliexpress that, while not a direct fit, did work. I know the manuals on these are pretty basic, but I know there is a button sequence you can hit to adjust the temperature. I'll try to figure out how I did it and post

[@hariskokanovic262]

Have a Spark machine. Everything is working except the heater. Won't heat. How can i solve the problem?

[@discomovilvip]

change the element

[@teacsmith9184]

How can you bypass the pos rdfi crap ... you can never use all the meda and it time out 😞

[@majedagha9309]

The bearing on my rod keeps jamming, I open it and loosen the bearing, clean. Run the machine it works for 5 seconds then same thing happens. Jams, any way we can clean the internals with any safe solution?

[@majedagha9309]

Or do I just need a replacement piece

[@mukhtar052000]

nice

[@kvnkrz271]

Can anyone share the video to repair the heating element?

[@jeromeo6911]

I'm in same boat

[@DJ.Kvn_]

How many are you guys connecting to a single circuit?

[@Cryofx]

Hi, this depends on machine power draw (watts). Amps*Volts=Watts (Also as W/A=V and W/V=A). Circuits only should support 80% load. 15amps*0.8=12amps available (with nothing else on the circuit). Therefore, if you have a 500w cold spark machine, and its on a 120vAC circuit, this equation would be: 500w/120v=4.1666Amps EACH machine is drawing. Then 12amps/4.5 (actual 4.1666 but added extra)=2.666 machines on the circuit before popping breaker. 3 Would work but breaker may blow and it is unreliable.

[@mfpro6204]

hello my error E008

[@kamalkoli9363]

This video send in Hindi audio