Cub Cadet Dealer Training Video for the Series 2000 Tractors

[@russlumley4974]

Oh how rechargeable tools changed everything

[@rudedawg5087]

Thanks for the video! My series 2000 2166 is 13 years old and this as a great reference for removing the fender to perform a thorough cleaning of the transaxle and fan blades.

[@MikeOrazzi]

Sounds like something I should do on my 2166.

[@Twobarpsi]

Great info!!

[@gobrowns1201]

Is there a rear axle pin release on a 2140 that is easy to get to w/o taking the entire fender assembly off?

[@philliphall5198]

Why are we replacing trans ??? Is it junk ??😢😢😢 Who makes it and is parts available???

[@simonk9729]

What kinda of transmissions do theses mowers have?

[@ken3700]

They didn’t put oil in the axle ?!?!?!?!?!?!

[@paultaylor7691]

Cannot find this information anywhere, not even in this video ... rear wheel lug-nut & hub-assembly on GT2523 ... What are the torque ratings?

[@paultaylor7691]

@@JoshAllen17Goated actually, I have now established that it is considerably more than 10ft/lbs! Wheel nuts @ 75ft/lbs Hub assembly central bolt @ 200-295ft/lbs!

[@paultaylor7691]

@@JoshAllen17Goated the figures I quoted, came directly from a Cub Cadet technician by phone, in connection with the wheels of my GT2523. The very reason I spoke to them, was because there was no detail in the manual accompanying my 2004 model.

[@7gymbo]

Good video and information.

[@markroth5129]

Tks, very helpful!

[@michellecameron206]

Still running my 1996 model 2165, will be 20 years next year. Only problem was needed new engine after 1000 hours, but found a good buy a couple years ago. Why I need this video - the deck lift assist stopped working and not much out there to help. Probably pins gone somewhere - the handle operates, but not attached to deck lift, somehow. Thanks for this training video - it shows how to get the body fender off so I can see what's going on, and hopefully I'll be back in the field again by June.

[@michellecameron206]

Michelle Cameron Now that the body is off I can see that the lift handle assy. weld is busted - the springs are ok, the spiral spring pins OK - but with the weld gone it from the handle to lift mechanis, the whole thing just free-plays up and down. Off to buy some parts.

[@marandaseager6943]

We have a 94 hds2135 bought brand new with 1000hrs running strong and have only changed the oil 3 times, buying a second today

[@sheamileto8124]

Conrail6370 What Happened To The Series 2000 Safety Video?

[@LeonardFShanerJR]

What do you mean?

[@mc22367]

I have a Cub Cadet 2206 was working great then all of a sudden it stopped moving and made an awful grinding noise. Is my transaxle shot?

[@tomsiebert1701]

Is there a KZbin how to remove engine coil model 2146 Cub Cadet unbelievable Onan engine

[@mowerman0718]

I have a 3205 replaced parts in transmission / how many inch pounds on oil pan

[@mrdeanv4414]

My 2166 Kohler motor 16 horse...just started burping fuel out the carburetor... any ideas..?

[@wandadean2283]

That happened on my 18hp Kohler. I replaced the carburetor.

[@mulishaworld1]

I bought one of these tractors from a pal. Do you know about what year these were built? It has a 12 1/2 hp Kohler.

[@askthegreentractorman98]

How long will the transaxle last I'm my ltx 1050 ?

[@andrea4809]

500+hours if it does not leak and you keep it clean.

[@markjohnson7508]

Cheesy early 2000 vids

[@LeonardFShanerJR]

Don't for get to rate and comment on this video.

[@andrea4809]

1.5 hours..... huh

[@geraldwilcox2427]

Only on New machines. Tacks longer on used.

[@banshee8989]

Cant agree with you more there :) last good cubs where the 82 series.

[@rzrsmrt]

ever look into the 3000 series? I have a 3184, 3185 and a 3206. All excellent machines. shaft drive decks, no bullcrap with the mule drive that spits belts.

[@ad356]

2000 series? place ramps on dumpster, drive tractor into dumpster. close lids and walk away. your 2000 series tractor is now fully serviced. my parents bought a 2135 brand new and it has been terrible. its ready for the junk yard. i have a 1971 IH built cub cadet 147. i rebuilt the engine now it runs awesome. IH built some great cub cadets but MTD puts the name to shame. cheap, thin metal and bad paint are a terrible combination

[@nickbishop8930]

MTD = Missed The Dumpster.

[@rzrsmrt]

Yup. Only good thing on the 2186 I bought was the motor which is going into my bobcat soon. The rest is junk. I love my 3000 series tractors though. Excellent machines and extremely robust and reliable.

[@GTObearclaw1]

Sounds like 1.5 hrs ain't enough time for all this work. Can you engine performing this repair an a Nasty used tractor? A mechanic would have to do this same Repair on 5 tractors in one day to get paid 7.5hrs. That's not even a full days pay but I bet the average mechanic would think 1.5 hrs is fair pay. Iv worked for a dealer and been screwed plenty on warranty pay, never again in my lifetime. Pass

[@stoneyswolf]

LOL 1.5hrs are they fucking insane. I get 2 for a front break job alone and it's only 4 bolts not counting wheel removal. I work 30-35 hours a week and pull down 65-70 hours no wonder the guys that work at small repair shops always look like drinks and drug addicts who else would do that shit.

[@jackcarroll702]

Andrew Manet if you didn't treat it like shit it would work

[@tomrobinson9108]

Video shows how to remove transaxle only. No other info.

[@jackcarroll702]

Probably the only good thing mud made was the 2165

[@jackcarroll702]

Thank you I own one works like a mule 1,000 hours

[@jackcarroll702]

I just realized I replied to my own comment

[@jackcarroll702]

😕

[@zacharycoslic1274]

Old ccc cubs were good too

[@robertthayer489]

these are junk

[@philliphall5198]

Other words it’s junk 😢😢😢