Cummins L10, M11 & N14 Cummins Engine Unwsitched Power to the ECM...Important stuff!

FREE Tech support for a ECM hp power upgrade kit route=product/product&path=57_69&product_id=89
Call 810.653.6300 or Texy 727.494.5514 or [e-mail] or www.n14parts.com Thanks Terry Chron

[@scottreed5460]

I want to put a more modern N14 in my 85 K100. Are the harnesses referenced here what I need to make the conversion? I will need throttle pedal etc.

[@ivangutierrez4434]

Wat function did that sensor do

[@amayricafort1008]

Hi ser how problem no assilarator m14

[@ivangutierrez4434]

Q funcion ace ese sensor

[@oscartorres333]

Hi Sr I have problem with my L10 cummins, the fuel injection pump is all ready repair and install but start no problem, just when I switch to drive or reverse the engine stop why??? automatic transmission, the line from the tank was opening and air go in so the fuel filter was empty every time, I fix the line and now star ok but I can't move the truck because when I engage drive engine stop, help me please, I am only driver of my own truck International 87 with cummins L10 engine dump truck somebody help me to fix

[@MikeFerguson-is1ix]

How much is. That. Wiring set up will it work on a 08 Volvo vnl. With the 14.9 think its called 860 Cummins motor

[@truckinnuttz7038]

good info great music

[@breannachron392]

Thanks Kelvin, glad it helped ya

[@ivangutierrez4434]

@@breannachron392 buenas soy de panama tengo problema con mi camion no tengo corriente en los ijector tengo corriente en itnition como me puede ayudar porfabor

[@maximomartinez8596]

Do you have a phone# where we can reach you in the future?. Right now l have my truck in the shop l'm having compression in the coolant but l'm needing the harness of the engine.

[@breannachron392]

Yes Sir 727.494.5514

[@georgecoco30]

Where are you and what’s your phone

[@maximomartinez8596]

Do you have parts for Cummins ixs to?

[@breannachron392]

Most of the ECMs in stock all other cummins parts What is ur Cummins ESN make and VIN#? and what are you looking for? Thanks Terry!

[@breannachron392]

Yes sir! Sorry for the delay

[@josephmasdo5210]

Hi sir can i request engine schematic for n14 engine tnx

[@breannachron392]

Sorry for the delay! Here is a link for ya n14parts.com/terry.pdf

[@ivangutierrez4434]

Soy de panama tengo motor cummis m11 celes plus ai corriente computadora pero para ijectore no tiene corriente no arranca como me puede ayudar

[@dantito3]

Tengo el mismo problema n14

[@ivangutierrez4434]

@@dantito3 y ya resolbite o todabia

[@ivangutierrez4434]

@@dantito3 el señor sabe mucho de cummis no abla español

[@ivangutierrez4434]

@@dantito3 en este video el sensor q el abla es de arbol de leva influye mucho con lo q es arranque un amigo me traducio lo q el dise ay

[@dantito3]

Revisaste el fusible que va en la batería ? Ahí va un cable con un fusible que envía corriente a la computadora del motor

[@easytopleez33]

No offense, but, I sure don't see any justification for $ 125 for your setup. How about doing away with the WeatherPac connector all together. And run 3 lengths of wire (two hots and 1 ground) with 10 or 12 guage wire and solder and shrink tube the connection along with your inline fuses. Never have to worry about that weatherpac connection that corrodes on every one I have worked on. Just my two cents. Oh and and it's a total investment at NAPA for maybe 20 bucks.

[@graygryphon2008]

Well we know that you cannot do it yourself Proud Boy. Proud Boy sounds like the name of a gay male stripper.

[@breannachron392]

We all network together and do and share what we are good at. Makes the world a better place for all of us to live and grow. Thanks for ur input!