Customize 2d to 3d files. Bambu Studio Tutorial Intermediate Level

Had an excellent comment that asked if we can raise certain parts of the 2d(jpeg/png) to 3d conversion model(SVG). Of course we can! This goes through an entire workflow of a couple of ways to do it.
#3dprinting #bambulab #tutorial #timelapse #diy

[@tufftimesbc]

Your videos are always practical and so spot on. Thank you and I always look forward to the next one.

[@ashleys3dprintshop]

😁Thank you. I have a bunch more for everyone.

[@loopers822]

Hi, awsome! really appreciate you putting the video together to answer my question! It worked a treat however, I have 38 filament changes over 2 colours ha ha......so I'll work on reducing these! Many thanks from the UK 🙂

[@ashleys3dprintshop]

Glad I could be of assistance. Your question was perfect for a video. It comes with a lot of manually tweaking though. Thank you again for your question and comment. Cheers from your neighbors across the pond. 😁

[@hawtdayum]

Exactly what I was looking for. Flush was cool but I want 3d! lol

[@ashleys3dprintshop]

Thank you for the comment.

[@rache5399]

Loving your vids! Can't wait to get my printer, you've given me some great ideas!

[@ashleys3dprintshop]

@@rache5399 Thank you very much. I'm glad my vids are helpful. I have a bunch more in the wings. Do you know which items you want to print first?

[@rache5399]

@ashleys3dprintshop I bought a P1S so probably some accessories for it like a poop chute, AMS stand and desiccant reusable desiccant trays!

[@mikeshawbrook-selfreliance]

Instead of lowering the red and then go in and lower all the tiny red pieces, why not just raise the white instead ? Then you could make the whole thing thinner afterwards ?

[@ashleys3dprintshop]

Yes you are absolutely correct. I took the long way around so people get the concept. That white horse logo was all one piece so there were only so many ways to show now to manipulate the parts. That's why the 2nd half was "reversed" from lowering the base to raising the black areas. Good catch. Thank you for commenting. 😁

[@snart]

Your videos are really useful!

[@ashleys3dprintshop]

Glad you like them! 😁i'll try to keep more coming.

[@steadytrousers9813]

Great video thanks

[@ashleys3dprintshop]

Thank you for the comment. More videos in coming.

[@tonymarreiros3186]

As always just to the point and practical, thank you Ashley. Just a quick one if i may. When you place the model on the plate it says the the edges are non manifold, do you repair them or just leave it. Thank you once again.

[@ashleys3dprintshop]

Hello. You can handle the "non manifold" error one of 2 ways. You can run the repair. It will try to fix the parts of the model that triggered the error. If you do a repair *do them in the very beginning* otherwise it will undo any painting you have performed. I have seen in some places it messes with the model in a weird way. I typically ignore them unless they look "funky" or full of errors. I could have run it at 6:30 but it would have reversed the painting. Not the end of the world with only 2 colors. In the slice phase I look over the model and correct from there. You can go layer by layer for a spot check .

[@tonymarreiros3186]

@@ashleys3dprintshop Thank you so much. That's what i do. I was just wondering if it is needed.

[@nealwitt]

I’m sure you r explained this in a video that I haven’t watched yet, but what’s the difference between global process and objects process?

[@ashleys3dprintshop]

Hello Thanks for watching and asking about the different process options. The explanation is scattered in my other videos so I just made a quick one to answer your question directly. kzbin.info/www/bejne/eorQfquVZtGhia8

[@BoosmannTV]

Hi I‘m searching for a selution to ad a logo on a cup! You‘ve got a idea for me? 👏

[@ashleys3dprintshop]

Cool idea! Sorry about the long delay. It can be done but it will be kinda difficult(not impossible) to do on a curved surface.

[@BoosmannTV]

@@ashleys3dprintshop That’s no problem, we all have todo some little other things than 3D-Printing 🤣. So we read us next time and i‘m excited for next few vids. Thank‘s your great work 👍

[@kcpatricktrucking1613]

Can’t hear you

[@ashleys3dprintshop]

Upgraded mic since that video. Audio quality should be improved going forward.

[@waynemenzi4288]

Your audio is always very low.

[@ashleys3dprintshop]

Yeah... My older catalog was a struggle. I had a subpar microphone. It was hit or miss on the "loudness" depending on if you listened on phone/tv or computer.

[@luisperez4386]

Is this software free?

[@ashleys3dprintshop]

The slicer (Bambu studio) is free and the website(vectorizer) is currently free. They have a disclaimer about going out of beta, and charging, but it has been like this for a long while.