CV Fabrications Ecoboost Mustang stock location intercooler install

We are back with another CV Fabrication piece. This time we are adding a stock location intercooler to Zach's Ecoboost Mustang. This stock location unit is for the budget minded spirited daily driver. Your will still experience a dramatic drop in temperature for your chair air temps and will be much better suited against the heat soak that plagues the stock plastic end tank units.
Message us to get your intercooler ordered today!
Follow us on facebook: Parker Performance
Follow us on Instagram: @parker_performance , @midiabl0,
, goodrun90, letscrea8
please support the channel: www.ParkerPerformanceFL.com
Get your upr stuff here: parkerperformancefl.com/t/upr
Get your Molygen: parkerperformancefl.com/t/oil
Tools of the trade:
1/2 in. impact: amzn.to/2XLZ2LE
1/4 in. Hex Impact: amzn.to/36O2VEa
Drill: amzn.to/2XI5QtP
35 ft lbs easy ratchet: amzn.to/3dheLc5
Battery: amzn.to/3diHflY
3/8s Easy ratchet: amzn.to/3dhe0Qx
cut off wheel: amzn.to/2ZSLyjN
basic tools: amzn.to/3cgleCT
tool box: amzn.to/2Xfmlyo
port a cool: amzn.to/3eF0gPT
jack stands: amzn.to/2XI1qTD
car jack: amzn.to/2TT1D5o
race ramps: amzn.to/2MeJ8Ec
oil drain pan: amzn.to/3ezuy6p
funnel: amzn.to/2MfkCmk
oil: parkerperformancefl.com/t/oil
impact socket set: amzn.to/3chDRGv

[@1pho3nixmatt]

“Wanna re-do that?”

[@robmarinella]

Thanks Parker Performance! Appreciate the install of this street intercooler and Cobb AccessPort v3 you did for me and look forward to working with you again.

[@guyver650]

Great video and thanks for the tutorial. On my 19 I had active grill shutters and the bumper is taken off differently from yours. 2 10mm nuts and a plastic fastener hold each side to the fender!

[@TheQuietOneADCG]

Thanks for the super helpful video guys! Keep up the good work

[@1cjoseph11]

Really appreciate the Ecoboost content guys.

[@photonarbiter]

Thanks for this upload! Do you think it's okay to only get the intercooler without the piping as your first mod? I'm not planning to go too crazy with the build. If i can get my 2017 to 350whp I think that would be more than enough. I've been in the forums and have seen these posted before and was just curious if this was the best place to start for someone who hasn't got much experience under the hood.

[@dnalor8753]

wish yall were closer to NOVA, I'm pretty bad mechanically and need a good shop to install mine lol

[@infinitelyyy]

So you didn’t have any trouble fitting this onto the stock charge pipes? I’ve heard people have issues with that, with the couplers being smaller, whatever. Idk I haven’t done it yet lol. But you didn’t have to resize anything?

[@xrmte]

Just ordered this intercooler for my 2017 ecoboost stang I think i made the right decision?

[@mak3830]

how much does it cost to get one installed? im in the area and need a company to install well for cheap

[@Nickyguapo]

Does the 15-17 come white grille shutters?

[@mrfreestyle50]

By any chance does anyone know if this intercooler will bolt nicely onto a mishimoto performance radiator?

[@1cjoseph11]

Wanted to ask if you guys would recommend a carbon buildup cleaner like crc?

[@Richard-Reloaded]

Does the package include the metal brackets and hardware? Mine didn't.

[@riowinardi7667]

Do you recommend the steert or Race version of Cvfabrication Intercooler ?

[@jameskelley2884]

Did it make a big difference in the temperature?

[@fcssensai]

Just dropped a sweep $2500 at y'alls store LMFAO