Precision Electric Screwdriver The Fanttik E1 Max

[@milivoje1111]

Love your content, keep up the good work mate!

[@nathanwildthorn6919]

@Cyber CPU Tech If you touch and hold the screwdriver bit on the magnetizer versus "swishing" the bit around quickly, you have a better chance of magnetizing the bit. Great video review!

[@uniqueangel]

Other thing would be to remove the bit from the screwdriver because it is hold on by magnetic

[@carlr2837]

I used to have a magnetizer. You just stuck it in, and pulled it back out. It worked fine.

[@FARDEENKHANQWE123]

chapters to know where the final thoughts parts starts would be nice. edit: found it at 15:36

[@godnamedtay]

lol thanks 🙏

[@mutazkojeh2061]

Keep going, you're awesome 👍

[@roylbates4155]

Mine can with instructions, and in the instructions, it tells you how to magnetize the bits. The man who can read and does not, has no advantage over the man who cannot.

[@ajanimandara9048]

W

[@godnamedtay]

Yea I agree. Dude is very knowledgeable, but comes off a little entitled & def gives off elitist vibes. As such can tend to look over things…

[@Spartan-ol7xk]

Thanks for the vid, helped me make a decision and earned my Sub this day! Look forward to future reviews for sure!

[@морс-ф3д]

Cool Desk setup!!!!! And great toolKit 👍👍👍👍👍👍👍👍👍👍👍

[@Jules_Diplopia]

Super looking screwdriver. I need an electric screwdriver, but most of them are too large and heavy for me. That looks light enough that I could actually use it.

[@ethimself5064]

Is quality thermal past much like various grades of Loctite? Real curious on this. Thanks

[@Dwayne-h2v]

your best bet for high quality thermal paste is thermal grizzly. they can be a bit expensive compared to other brands, but they have basically the best pastes you can buy. You can judge thermal paste quality by its W/mK (Watts per meter kelvin) thermal conductivity rating. W/mK is a measure of how well it is able to conduct heat. I've used almost all their grades of paste, including the liquid metal, and they are great. do your research on how to correctly apply the liquid metal if you decide to use it though or you could prick your device.

[@brandyboutwell9388]

my wife got me the wowstick a couple years ago. i love it and use it every time i can. it even comes in handy for non tech stuff like knives and models. only negative thing is that it isn't usb type c.

[@ethimself5064]

Curious - Permanent magnetic bits etc are not hard to manufacture are they? I can't remember any magnet I ever bought not being permanent. Was a mechanic when young

[@josephbargo5024]

Ive never seen permanent magnet bits. Most bits are ferromagnetic, meaning a magnetic field can reposition the spin of the electrons in the metal. This magnetizes the bit but isn’t permanent or very strong compared to a permanent magnet. Most manufacturers add a strong permanent magnet behind the bit holder that magnetizes the bits more than just altering the electron spin. In short size constraints and metal strength properties prevent making bits from permanent magnet material.

[@nobody1841]

I picked up a magnetizer / demagnetizer cheap on Amazon

[@richyrich5049]

I just caught this bad boy on Amazon for $41 with coupon and pre applied discount.

[@aemsignite7144]

Would this be good for moding gameboys because I don't want to strip anything if I am moding a gameboy? And does it have tri wing bits?

[@Mutation666]

You should be using coffee filters for this, they don't have the ability to shed paper fibers.isopropyl alcohol for cleaning as well to get it perfectly clean.

[@Falangist]

Since it's a direct die, wouldn't you get better thermals using Thermal Grizzly's liquid metal, rather than the thermal paste?

[@CyberCPU]

It's a 8th Gen i5 mobile processor who's primary job is to pull diagnostic data from my car. Thermals are not an issue. 🤷🏻‍♂️

[@TotallyNoAim]

Normal thermal paste is plenty anough. Light metal is risky and really hard to apply. And on most heatsinks and CPUs it's not even compatible

[@compustat]

I like it, just ordered one, thank you.

[@Haylo_]

Is it good?

[@angelacrew-dothard8302]

What happens when they all fall out ... Is there a guide to put them back in the correct spot or just use the illustration at the bottom? 🤷🏽‍♀️

[@DrClausTechTips]

Have you ever tested the iFixIt electric screwdriver? I wonder how it compares to this one.

[@fredfarnackle5455]

You didn't mention how the screwdriver is powered. I assume rechargeable via USB or USBC.

[@koiledkobra]

Usb c

[@mikebal7777]

16:02 Good overview/review...but you had me a Clumbersome! I appreciate real videos not edited all to hell

[@thenanook]

19:36 hahaha sooo true, i was 20/20 and as soon as i hit 45, i woke up one day and i couldn't read shit, so yes your time will come

[@GYTCommnts]

This is what the "big G." seems to don't understand with their freaking ads system. If you talk about a cool product related to a hobby I deeply care, you may have my attention. And I liked this review, with a practical example.

[@peterdewolff6650]

5 minutes into the video: first time screwdriver is actually working.

[@nls3081]

i know is not the right place here, but has anyone problems with KB5034123 on Windows 11 ? (and actually there is another update related to this, the KB5034204). I can't install neither ! The Windows is original, 11 Home, came with the laptop.

[@EquatorialVillager]

I recently had issues with one of them dated October 2023. Clearing caches and manual updates didn't work. I ended up downloading a new Windows ISO and installing over my existing one to skip over the failing ones. If you do this ensure you get the same language as what is installed on your system.

[@Slurgical_3D_Terrain_Channel]

WEtVAc...I use it on my beard, that's probably why they reached out to you. :P I just got their precision soldering iron I will use on my tabletop game terrain.

[@GumbyPW]

Just stick A small Neodymium Magnet on the bit, It'll keep the bit magnatized as long as its on it

[@pauldelisle8175]

Magnetized bit don't work with stainless screws!

[@gotbordercollies]

It is like magic...

[@Fred2-123]

Whoh!! $70 for a screwdriver. Oh, but discounted from $80. What a deal.

[@TaxEvasionUS]

I got mine for $50

[@craigconway4093]

With coupons I'm seeing it on Amazon for a little less than $40 shipped (8/8/2024)

[@icetray2727]

I actually ordered this off of TikTok shop

[@vla2uv]

Too bad that due to your infomercial on your channel there is no discount to Amazon for those interested about this precision Electric Screwdriver The Fanttik E1 Max! That you didn't make any deal/arrangements with Amazon, that is.

[@blakepace]

You make a much, much better Doctor Who....

[@eltorocal]

Fantic Motors manufactured Observed Motorcycle trials bikes back in the 1980's and 90's.

[@srvuk]

Nothing megnetic ever comes close to my dats storage. All the tools I have needed to take apart any machine likely cost me less than £30 total.

[@TheWatcher-wb1hc]

Man is there anything you don't do thank yoU!

[@pdjhh]

When you gonna make a video about Microsoft’s latest disaster that ignores the will, want and needs of its customers? Which one you might rightly ask well this time it’s outlook mail of course!

[@Slobodan26]

is that Thermal Grizzly 26 grams syringe ? :O sooooo big lol

[@colt5189]

Ifixit sell an electric screwdriver.

[@waycool1969]

I got one from Ali Express .

[@MrFistxx]

You got trash from Ali Express

[@waycool1969]

@@MrFistxx Not at all. It's all made from China!

[@AriR6R]

@@waycool1969 😯

[@PazLeBon]

Not as good as a sonic screwdriver tho is it :)

[@michaeljavert4635]

I have one. Basically exactly the same tool but mine came in a card board box and less bits. It did come with a USB C charge cable, but it's only about 6 inches long, so that cable is useless. Otherwise I love it. Yours is better and I really like that storage case. I didn't get a spudger or tweezer either. I've not had any luck with magnetizing my bits either. I played with magnets when I was a kid. They seem nowhere near the quality, strength, or just overall greatness they were then, and sadly, I think it's because China sends all their junk over here and not good stuff. Back then more things were made in America and Japan. Except for (American) flags, made in the Republic of China. Sad. I have another toolkit though not called I Fix It, it's got the same stuff including what looks like a wrap of nylon or cordura around tools. And I also have those picks. I don't think either one of mine costs that much unless I was in one of my shopping stupors. Pretty sure the electric screwdriver was around under $30.00 I did get them on The Amazon though... Looking back through history I see I paid $ 23.99 for what you're calling "I Fix It" Kit. Mine has a different name but all those tools. And the electric driver is $ 24.99 Never even considered The Amazon until this pandemic came about and taking care of my Mother while she was dying, of the cancer, and I couldn't leave the house. But anyway. Those little magnetizers never really worked for me. I had a horseshoe magnet when I was a kid and that thing stuck to anything and you had to have some strength to get it loose. It worked great at magnetizing things.

[@ethimself5064]

Sounds screwy to me 🤣🤣🤣

[@sergioontiveros4984]

You not knowing how to use a magnetizer is not the tool's fault your supposed to just insert it and pull it out not jiggle it in the magnetizer

[@godnamedtay]

HOWEVER!?!?!?!?!!

[@tommiller1315]

I thought Windows 10 was free. All I needed to do was use my old Windows 7 key on install.

[@ethimself5064]

This may be too late. Check the details.

[@tommiller1315]

@@ethimself5064 Oh, but I kept the SD card with the upgrade. Not impressed with the Windows 10 online updates that interfere with my use of older programs, and changing what opens photos' and whatever else. I am on the verge of returning to Windows 7, and ignore the hacking warnings, so I will not have to replace more software as Microsoft decides to make it obsolete.

[@ethimself5064]

@@tommiller1315 I don't have those issues with 10.

[@RawadHanna1]

I paid 35$ from TikTok shop