👉 How to clean fuel injectors yourself: kzbin.info/www/bejne/bqOrnoFodqiSo80
@Soupy59 Жыл бұрын
By far the best through rebuild injector on the internet!
@timothymundy96610 ай бұрын
got the whole setup there for super cheap. I'm throwing a 30 year old intake and injectors on this motor I'm installing and i feel a whole lot better about it now. appreciate the video
@oskar_eklund Жыл бұрын
I'm glad KZbin recommended me this video! Had a hard time finding the o-rings available in Sweden, so I purchased your kit. Thank you!
@CycloneCyd Жыл бұрын
Awesome! Thank you! It'll be on it's way soon
@anrshfАй бұрын
thanks you for tutorial how to remove micro filter, just brought the tools make it myself, the best video i found how to do it
@danikays45055 ай бұрын
Hi! I want to say thank you. I bought the kit and my injectors are renovated. My filters were like non-existant so the filter removal tool did not work for me. But a regular wood screw and some muscles did the trick. Thanks from Sweden! :)
@frankerat7 ай бұрын
Thanks for a great video and the rebuild kit. Purchased a kit for my 9-3 Biopower -08. 🇸🇪
@raiderman28 Жыл бұрын
Excellent video. Straight to the point.
@paulcohen1555 Жыл бұрын
Very clear and concise explanation and video.
@CycloneCyd Жыл бұрын
Thank you, that's good to know as it's what I aim for.
@aidandude33 ай бұрын
I did this with my Denso Toyota injectors, same injector pulser, similar ultrasonic cleaner and submerged the injector nearly fully (as he did in the video). Did each injector for around 10 mins taking a break halfway through as everything gets very hot. Rebuilt with new rubbers and pintle caps. Car started misfiring on cylinders with cleaned Injectors. Also started leaking fuel from the body of the Injectors. I had to buy a new set of remanufactured Injectors off eBay, runs perfect now. If you're going to do this, I suggest only submerging the tip of the injector in the ultrasonic bath then manually pulsing through some carb cleaner. Do at your own risk.
@CycloneCyd3 ай бұрын
When the injectors were in the bath did you connect them to a battery to hold them open? If so, no wonder they got too hot - that would have possibly caused the leaking. You can see in the video that I used an injector tester to pulse the injectors open and closed for about a minute. let themrest and repeat. That should be plenty. When the injectors are in the bath, no fluid is running through them to act as coolant.
@GoodBadAndUgly-oc1dr7 ай бұрын
Very nice and detailed process. Can you please give me a tip how or best way to remove the retainer at filter side and not breaking it?
@drivewaygarage156110 ай бұрын
Best video I've seen on this.
@natvega13 ай бұрын
This is very good but if you don't change the pump low pressure mesh pre filter and the high pressure side filter you may still encounter a problem with acceleration. And the end side of the fuel rail where gunk usually piles up.😅
@esales20019 ай бұрын
Great Video ! Can you please share where you bought the rebuild kit?
@MrOikono2 жыл бұрын
Cyd can you please do a step by step of the areas that we can change the vacuum hoses on a B207 engine ? A how to for vacuum hose replacement please ….
@alexandredionisio92802 жыл бұрын
Do the entire vacuum system not just some hoses, start with the pump itself. Indeed it would be nice if we had a complete schematic of the vacuum system.
@ArcadeCabNBud2 жыл бұрын
@@alexandredionisio9280 that would be so rock n roll
@CycloneCyd2 жыл бұрын
I'm gonna do a video. I suggest using blue vac hose - that way you can see at a glance which ones you've done and not done. You'll need some 4mm and 5mm. A 3m coil of each should do.
@MrOikono2 жыл бұрын
@@CycloneCyd thanks man. Looking forward to it. You teased in a previous video that you had changed some vacuum hoses if I remember correctly
@jesusvargas16203 ай бұрын
Excelente video amigo, tengo una pregunta 🙋🏻♂️, este kit de reparación servirá para inyectores Infiniti 2011 M37.? Gracias 🙏🏻 si pudiera orientarme. Excelente contenido
@vijaysundar52502 жыл бұрын
Clear & nice 👍 keep going
@CycloneCyd2 жыл бұрын
Thank you Vijay, I will.
@Rxb_k24na Жыл бұрын
Hello I have 1000cc grams injectors for k series it seems they are not rebuildable?
@steadyteddy25522 жыл бұрын
Awesome tutorial as usual 👍
@CycloneCyd2 жыл бұрын
Glad you think so!
@outfield19882 ай бұрын
Great video.
@WHEELSRODSADVENTURE6 ай бұрын
regarding the removal of the micro filter. using the filter remover. it can only takeout the plastic part ofmthe original filter. the metal part will remain inside. how can you pull it out? you cannot just leave it inside and just push the new filter because it will cover the half of the new filter when you tap it in and the flow of the gas will not be normal as before.
@churchking2527 Жыл бұрын
What is it 50/50 mixed with and how long did you leave it? And do I need to worry about a short?
@hdsmotorsltd47011 ай бұрын
Hi, I have a Honda Civic 2012 1.4 I-VTEC EX. I was wondering if it is possible to rebuild its injectors? If so, is there a link you can send for the rebuild kit required? We are based in London. Other than that, is there another solution? I have checked the injectors, one has an electric problem the other doesnt spray but I can hear the ticks.
@joshualopez2247 Жыл бұрын
Hello I’m doing the same procedure bt I hav plastic o-rings n the bottom unlike yours doesn’t remove can I still wash em
@BJ-fk9sq Жыл бұрын
Does the rebuild kit fix clogged injectors? Or do you still need to clean them and use 12v power source?
@CycloneCyd Жыл бұрын
If your microfilter is clogged, you'll be replacing that from the kit, but otherwise you'll need to clean them as well. With age, the o-rings become prone to small air leaks so there's a big benefit in replacing them. Follow this guide to clean the injectors kzbin.info/www/bejne/bqOrnoFodqiSo80. It's cheap and easy to do.
@mr.o20612 жыл бұрын
Did you ever do a video on keeping the ECU cooler?
@CycloneCyd2 жыл бұрын
No video yet, but I am trialing something at the moment to see how effective it is (got a 100 mile motorway dash coming up in a month and hoping for HOT weather for the test run). It's something cheap and easy to do, so fingers crossed it has a positive effect. Assuming it seems to work, a video will follow.
@dfitgirl219611 ай бұрын
Hello. Can you please give me the part number for the 3.0L, 6 valve kit on Denso? I need the package that includes the "retainer rings" you mentioned. Thanks. DC
@peterm.coulton72592 ай бұрын
Do you have kits for Mercedes OM617 diesel injectors
@BimBumBamAbove-Beyond3 ай бұрын
Need an service kit for Volvo Xc60 T60 engine i think fuel injectors are Denso 0620 7G9N-AC if u know where to find em will be great help
@Iriegreenfarm Жыл бұрын
Do you have injector kits for the 2001 Toyota Corolla
@jacobthebluesman5 ай бұрын
Hi, does you oring set found on your "buymeacoffee" store fit a Saab 9-3 1.8T BioPower 2008?
@octymocty132 Жыл бұрын
But one thing you havent mention is why your servicing them in the first place In my opinion shouldn't use silicon grease as it could mess with 02 sensor ( if ya look a head gasket sealants you can get same issue )
@CycloneCyd Жыл бұрын
Over time and use, the injector pintle becomes blocked with deposits and also wears. This affects spray pattern and fuel metering resulting in poor atomisation. O rings harden and split or shrink and leak.
@goro702 жыл бұрын
Where can one order this injector service kit? Thanks
@CycloneCyd2 жыл бұрын
Sorry not to see this sooner. There's a link in the description, but here is is too: www.buymeacoffee.com/CycloneCyd/e/79386
@amitvtr10 ай бұрын
Legend 😊
@isakeriksson1183 Жыл бұрын
I suspect I have one (or more) leaking injectors in my B207. Would this kit stop the injectors from leaking?
@MrRusell867 ай бұрын
Most likely, yes. The o-rings work as gaskets.
@frankerat6 ай бұрын
Still waiting for the rebuild kit. Ordered it a month ago??
@Mdbikeservice Жыл бұрын
Nice 👍👍👍👍👍
@DarySmith-hc4ub Жыл бұрын
Do you sell the fuel injector rebuild kit for Saab 9-3 ?
@CycloneCyd Жыл бұрын
YES, for the Denso: www.buymeacoffee.com/cyclonecyd/e/79386 If you need the Bosch blue or green, get in touch by email (see 'about' from Homepage), I can get those at the same price.
@badrhari14 Жыл бұрын
Hello mate! How many cubics (cc) is these injectors?
@CycloneCyd Жыл бұрын
Don't know, but the siemans green fitted to earlier B207Rs were 176ml/30s, these will be similar if not a shade more 'cos they are fitted for bio fuel engines
@badrhari14 Жыл бұрын
@@CycloneCyd is there any chance when replacing the stock injectors on the video with the green ones fitted to earlier B207R without a remap and sometimes after 1-2 hours of riding the car record P0201-04 Codes?
@CycloneCyd Жыл бұрын
@@badrhari14 Normally those codes mean the ECM has had it, BUT I don't know if changing the injectors from Denso to Bosch would also cause them. Can you fit the Densos back in to see? Service them first though
@nathanielramirez89972 жыл бұрын
This couldn’t be better timing for me, cleaning mine today. What did you mean by take pictures of orientation for the retaining rings?
@CycloneCyd2 жыл бұрын
Whenever you take anything apart, take pictures as you go. You can use them as aide memoirs to help put things back correctly.
@alexandredionisio92802 жыл бұрын
As I told you earlier, did "sealing" service for Bosch but I didn't get inside of injectors cause I didn't know. Could you also do kits for the Bosch injectors?
@CycloneCyd2 жыл бұрын
I'll look into that for you. Is it problematic getting them in your locale?
@ArcadeCabNBud2 жыл бұрын
Thumbs up
@CycloneCyd2 жыл бұрын
Thanks 👍
@slidewayskrew Жыл бұрын
Prize?
@billb78763 ай бұрын
Is it Saaaab or Sab ? I always say the latter lol
@douglasjre28 күн бұрын
Your labor is $120 an hour. Why don't you just order all new injectors?
@joesphanlu336928 күн бұрын
@@douglasjre a set of good injectors are expensive. This may take only an hour
@ivanrousseau50662 ай бұрын
the first thing you need to do is collect about 4 thousand different o ring sizes . until you find one that actually fits.
@dr.z3426 Жыл бұрын
Just for the record I have a box of hens teeth just dm me