Red installs a D16 Cam and adapts the AEM cam gear to fit the D17 head. @Gravy_built #pnsearch needs a Honda show For your performance parts needs enter discount code "Pirate10" for 10% off your purchase at boostprojects-s...
Пікірлер: 325
@NWB19895 жыл бұрын
Would've love to see a comparison between the power that the OEM D17A2 cam produces compared to the swapped out D16Y8 cam. Can't wait to see what the horsepower ratings are with it on now.
@PirateGarage5 жыл бұрын
This motor has alot of miles and burns oil I don't think it would be good for a comparison I'm building a foundation for the turbo and plan to put a built motor when this one goes. Plus dynoing the car all the time ads up
@boxer9513 жыл бұрын
you should make a P&P AEM cam kit to be able to install the D16Y8 rocker assembly for the D17A2. you said u had to shave off some material on the AEM D16y8 cam and keyway in order to fit the D17A2 AEM cam.so would be nice to buy them already shaved and ready to install. great video like always.
@That1E_K11295 жыл бұрын
I was gonna juice up my em2 but for the money spent to get an extra 20-30 horse was just about the price of a k swap so thats the route i went with mine. This is interesting as all hell to see done tho. Very well spoken my friend
@youngfeezy79693 жыл бұрын
3 mins in and i can see how experienced u are. Wow. Im impressed and inspired. Thank u for ur content. I subbed
@oldchevyjunklover71442 жыл бұрын
Note use a rubber mallet not a metal hammer
@hondatrix5 жыл бұрын
There was a batch of these D17's that had the camshaft wearing or "walking" away from the cam sensor...
@jnutz48715 жыл бұрын
I figured that same thing happend to my d17 because it started limping but it turns out after checking everything all I had to do was replace the cam/tdc sensor and its been running fine ever since.
@ClumsyCars3 жыл бұрын
Yep, i think i got one. Get a cam code if go over about 4k rpm sometimes, ive replaced the sensor twice.
@KarsUpGraders5 жыл бұрын
Thank's mister Red!! now I will do the same to my d17a2 👌
@ksich81425 жыл бұрын
Man your videos are great I watched so many of them and your an absolute genius!! It’s amazing how intelligent you are and amazing at explaining stuff!! So detailed in ur videos keep doing what u do! Only videos I enjoy on KZbin are ones like these
@jonathanruvalcaba71893 жыл бұрын
Just picked up a clean EM2, been outta the scene for a long while now. Definitely gonna hit you up to build my civic bro, I stay in Chula Vista too. Good content man!
@MFDRIVE9092 жыл бұрын
Literally what I needed for my build THANK YOU!!!!
@beastlierect955 жыл бұрын
Ive got a crower stage 2 turbo cam in mine and was able to find it in stock abt 3 yrs ago ...nice video
@matthewb70495 жыл бұрын
So your saying they went to this camshaft and put it in motors as a stock part?
@beastlierect955 жыл бұрын
@@matthewb7049 no I mean places still had it in stock for sale even though it was discontinued lol
@matthewb70495 жыл бұрын
@@beastlierect95 yeah I have been thinking about getting a stage 2 crower cam and i can still find them.
@Yaboybash5 жыл бұрын
Are you doing D16y8 intake manifold swap too?
@pFbSpecV5 жыл бұрын
Well done!! I'm learning some info on the good old d series!
@dielikeaman3 күн бұрын
Wish i knew what exact cam gear and if it has to use a k pro to run with that set up
@805DrPepper3 жыл бұрын
Your smooth with it great work!
@hollywoodundead72 Жыл бұрын
Could you use a new stage 1 d16y8 cam ? Im curuois because it wont be easy to find a low milage cam
@Gsxforsale5 жыл бұрын
First of all that was bad ass
@andreasoliboni69174 жыл бұрын
Hey there! Very nice this little projetc, do you think abaout show us how does it runs? A street test...it should be very nice! See you!
@PirateGarage4 жыл бұрын
I'm working on that this car is mostly for showing what you can do but I'm trying to make it a reliable car for driving around
@andreasoliboni69174 жыл бұрын
@@PirateGarage Thank´s bro!!! Keep up on this videos!!! I love it...
@jesuspena31904 жыл бұрын
Hey red , so all I need for this conversion is y8 cam with y8 valvetrain and I order a adjustable aem cam gear , also do I got to shave off some like you talked about with yours , your a genius man goodstuff.
@PirateGarage4 жыл бұрын
You need a Hondata aem d17 gear and an aem d16y8 gear
@IrnMaiden3043 жыл бұрын
Could you use a stock cam gear from the Y8 or is there a difference in the way the censor reads it or difference in diameter between the A2 and the Y8 ?
@es2_civic792 жыл бұрын
I think he said it’s because of the cam position sensor
@mooseman69263 жыл бұрын
Evey time you work on it and you move around the ac compressor lines(the thick black hose) make sure you tighten the hoses that go into the ac compressor because it will become loose and you'll loose freon
@zReignYT2 жыл бұрын
No shit
@KietK4t3 жыл бұрын
So has anyone done this and there car is still running?? I just bought a y8 head for this
@rjaybruhhАй бұрын
*_Yo that's crazy_*
@jorgecruz98153 жыл бұрын
esos motores son muy buenos d17A2 MUY BUEN VIDEO
@sicckarrimail65253 жыл бұрын
This is similar to vtec e but truly isn’t. Honda refined the vtec in these to turnover at 3k for a smoother transition and a smoother HP curve... These systems actually create more low end torque and high end power then the older 4500 BWUAAA vtec system. Yes it doesn’t make the cool turn over sound but all in all is actually more powerful just much less noticeable. It’s said that the d17a2 with the stock vtec system breathes better then a b16a2 and pulls smoother then the y8 and other vtec systems of that era. This also makes tuning easier because you work off a smoother hp and torque curve rather then tuning around the huge jolt of power at 4k-4500 on other models. This is what I’ve learned doing extensive research because I’ve been considering switching mine out too but now I’m indifferent.... What’s your experience with it over a period of time?
@presinald Жыл бұрын
I mean even if most of that is true, doesn't seem to be much aftermarket support for the D17A2. I just bought on a couple days ago and there ain't shit the Crower cams are still gone and everyone says it doesn't take bolt ons particularly well. Would love to just have a few small things to do to keep this as a daily driver and still have a little fun and knowledge but doesn't seem like there's much.
@vunree9744 Жыл бұрын
@@presinald these can receive the k20 and k24's, alot of the rsx parts swap over as well. give it a look
@presinald Жыл бұрын
@@vunree9744 yeah if I end up really liking the car I might do that down the road it'd be a fun learning experience, but really just wanna slap a header and get rid of that weird plastic intake but there's little support other than a few people who hacked up Y8 intake manifolds
@sotikmaster4 ай бұрын
Не сильно понял, кулачки больше на d16, а можно на d15 примерить
@Acc3l3ratoRАй бұрын
Cool ! what about the ecu ?
@vieira2402 Жыл бұрын
hello, answer me there with the swap of the intake manifold D16Y8 the Honda Civic D17z3 1.7 16v 130vc vtec will gain about 10% more hp ???
@joeymasterson43954 ай бұрын
Awesome stuff.
@xlSpeakalxАй бұрын
Are you still doing the d17.....?
@matthewthaxton9344 жыл бұрын
Part list?? Thanks
@jnutz48715 жыл бұрын
Bro this is seriously fucking awesome im doing this to my d17a2
@unique13915 ай бұрын
Why did you have to Shave .001ths off the back of the D16 cam gear center? Was it to make sure that it would bring the cam gear it's self closer to the engine or ?
@KarsUpGraders4 жыл бұрын
Bro i made a custom adapter to install d17a2 pulley into d16Z6 cam
@PirateGarage4 жыл бұрын
Good for you 👍
@Brock_Landers5 жыл бұрын
I boosted my JDM D15B VTEC in my EJ8 Civic coupe and it was so much fun. Then once I swapped to a B series it lived on boosted in my buddy's EJ2 for years until he sold it and the douchebag that bought it blew it up intentionally.
@reacechalmers9474 Жыл бұрын
did you shave off 100,000th of a inch or 10,000th? sounded like u said 100,000 but that's insanely small.
@presinald11 ай бұрын
This is very impressive but how does this work out to be real 3-lobe VTEC? Wouldn't it just be stuck on either the low lobe or high lobe?
@abdulmaliktayeb16732 жыл бұрын
The D17A1 have a modified stroker
@hammadsaleem7082 Жыл бұрын
Cam noise solution please
@leonardandrade5563 ай бұрын
Is this the A2?
@spankthemonkey34374 жыл бұрын
I wish I could take out and swap the k20 for a d16y7
@Taytilla4209 ай бұрын
im gonna do the same swap to mine, what cam gear should i buy?
@user-gu2sd5po1f3 жыл бұрын
do like this the standart vtec can work ?
@joeymasterson43954 ай бұрын
Great video 👍🏼
@hotboi.status3 жыл бұрын
How much exactly did you have to shave off from the y8 cam gear to get it to fit
@andrewdoucette755510 ай бұрын
Hey, can you please send me a parts list and that special price you got for the timing belt that you shaved ? I really would like to do this in my car I just got 2 heads a d17a2 and the d16y8 both from a pull junkyard with 100k each and onlt paid 115 for ECU harness and 2 fully loaded heads
@axeljitt62465 ай бұрын
are those d16 rockers ?
@Joey-op4ve10 ай бұрын
How can I use a y8 when the cam on the d17 has cam censor plates
@Austintravismusic7 ай бұрын
Where did you get the timing belt clear cover?????
@choicardinio80143 жыл бұрын
Thanks for sharing!
@deansanderson83013 жыл бұрын
great video bud just a thought if the d16y8 stock cams fit this d17 would the d16 road cams fit
@johnmiller6494 жыл бұрын
Do you use y8 valve gap or d17 valve gap
@SpoonerTV2 жыл бұрын
Would this work on a D16v1?
@totalallrcs9001 Жыл бұрын
So you had to get two different cam gears an make one out of the two?
@rubenchavez1104 Жыл бұрын
Will it be possible to change a rocker arm from a d17 to a d16y8?
@kevinashcroft60604 жыл бұрын
Could you actually feel and hear the crossover after doing this?
@asherq86463 жыл бұрын
Yes it is very very pronounced
@cesarcastrogoncalves203711 ай бұрын
Hello pirate. I want to ask you a question. I have a 7 with a d16v1 very similar to your d17. I have a camshaft and 8 to install. Do I have to install a vafc? Thank you
@therez63639 ай бұрын
Can the head be switched to the d17 as well or a proformance cam for the d16. Also have you tried the stunk 2 on it as well
@gregturley75802 жыл бұрын
Will you have a check engine light after doing this only asking because I got the same engine and Id like doing this but i gotta do e check
@98ek95 жыл бұрын
Nice install! Hell of a job!
@matthewthaxton9344 жыл бұрын
Finally found a good video!
@kaseymeadows55314 жыл бұрын
Didn't the head gasket blow after this
@PirateGarage4 жыл бұрын
The cat was bad and because it's a d17 had nothing to do with the cam swap it ran great after I fixed it
@wingmanz14 жыл бұрын
Nice work! I have one concern - the cam caps are specifically machined to the head, you should definitely measure the clearance otherwise in pretty sure that you will ruin the head and the cam.
@PirateGarage4 жыл бұрын
the d17 cam caps work also with the d16 rockers so no issue. i didn't do it on the first video bit i swapped them later
@wingmanz14 жыл бұрын
@@PirateGarage Okay mate, everything clears up now. I just tested the swap on my spare head and everything looks good and the camshaft spins freely. I'll try to see if i can use the oem pulley with some kind of custom flangr cause d17 parts in Europe are non existing
@hotboi.status3 жыл бұрын
Were you still able to get vtec to engage??
@blue_lancer_es Жыл бұрын
Is the jdm d17a cam 3 lobe?
@jamesdiaz25563 жыл бұрын
Can I do this to a AD17A1 or only the V Tech model or can I just put a v tec head on and what does that take to happen do i have to change the ecu as well 🤔
@beierkeagan Жыл бұрын
Where did you order the camshaft I'm having a hard time even finding a stock one
@robertolozano54634 жыл бұрын
Does this work with a stock ecm?
@loskposdeltaladro2 жыл бұрын
Really good video and idea mate! please tell me that now with this mod the poor d17a2 have a decent VTEC..? I'm planning to do it on a d16v1 its the same right?
@klemen2987 Жыл бұрын
Have you done it?
@isaaces26225 жыл бұрын
Please video for install d16y8 intake manifold for d17
@PirateGarage5 жыл бұрын
That's next week
@isaaces26225 жыл бұрын
Nice
@brianbejado32375 жыл бұрын
Yes second that
@brianbejado32375 жыл бұрын
Looking forward to this mod
@isaaces26225 жыл бұрын
Hey bro and install mod in my car intake d17 stock is so bad the d16 intake manifold is good and change throttle body and more power
@uhoh49612 жыл бұрын
Can I do anything like this with an R18? I'm guessing no because of the economy iVTEC .. great video smart budget minded build, showing some ingenuity which is cool to see in a build video. Thanks for taking the time to film this and upload it
@Casey_and_Cars2 жыл бұрын
Not really. The R20 cam might be an upgrade. But other than that, Skunk2 is the only option for R series cams
@alixs_life2 жыл бұрын
@@Casey_and_Cars @uh oh : pretty much what he said you can port and polish heads and get the r20 and you will not technically be a 2.0l displacement
@Michaelhood02 жыл бұрын
I'm test fitting this in a spare engine now. I have hondata on my car but with oem pullys sizing up im not seeing why shaving the inner y8 portion is nessisary. Perhaps the offset of the 2 aem parts push the t belt into the relucror ring? I dont have a lathe. If the belt is pushing is The ring I could either shim the reluctor ring back some or shim where the outer and inner meet no?.
@Michaelhood02 жыл бұрын
I'm also curious what d16 cams will fit before smacking the piston into the valves. The valve reliefs are very shallow on d17 as apost to d16 but perhaps that's because the ste stroke move the pistons further away from the same crank position? Thoughts?
@jesusvalentin80883 жыл бұрын
Hi I like your video 👍🏼 question can I do that to my 2005 Honda Civic lx special edition 1.7L 5 speed
@nissaarwz46452 жыл бұрын
I have the D16W7 engine with VTEC E , same as in the video. Will this cam from the Y8 fit the W7?
@matthewthaxton9343 жыл бұрын
Hey when you switch from the a2s cam to the y8 what cam gear did you use the one for a y8 or an a2 and why thanks any info be welcomed
@danialiskandar7651 Жыл бұрын
Are u able to fit a stock cam gear on there? And if so, wht needs to be done to get it on? Or will i need the cam gear and kpro? Cuz i was planning on doing the doctronic ecu
@thapreludedude55912 жыл бұрын
i did this exact swap and now my low oil light wont go off but its full it has good pressure i replaced the vtec switch and the oil sensor
@patrickfrehner45823 ай бұрын
You switch the vtec and oil from the d16 or what did you do? I didnt understend
@hockeyfreak0435 ай бұрын
Hi.luke ur channel..i have a d17,wondering how to get a little more power..not sure if im good enough to put a cam an all that other stuff..in a get it right..lol..can u change the air in take to ? To something else..?
@randomdude34425 ай бұрын
If u want a bit of power either hot or cold intake,new manifold (don’t cheap out), and a new Exhaust Yokohama or Magnaflow, then maybe new fuel injectors I heard you can get some prelude injectors to fit in don’t remember which tho
@almatsailaukhan91812 жыл бұрын
i wonder if a d16y8 cam will fit in a d16w7
@stevencarvalho685 Жыл бұрын
If your still answering questions, does the timing portion of the cam gear sit flush with the part that the cam slides into?
@mrbigbuds17452 жыл бұрын
What was the special part u needed
@effervescentrelief5 жыл бұрын
You got a new subscriber.
@DMUC3602 жыл бұрын
U know how much u shaved off that keyway? Thx
@jacobcruz75613 жыл бұрын
Can you jus put the d16 cam with it instead of swapping it ?
@tkd_diy50214 жыл бұрын
Can I go stage 3 crower camshaft with stock valves? Love your videos man
@PirateGarage4 жыл бұрын
Probably, valve springs no
@jesselongden64902 жыл бұрын
Hey red do you need the k pro ecu to do this swap? And do you need the kpro to install the y8 manifold? Im curious due to im looking to do this all but the k pro is expensive... Any place i could get it cheap? And also lmk about needing it to do these swaps thank you
@timbo19751975 Жыл бұрын
I would say yes- cos the factory ECU is going to switch the cam profiles at totally the wrong RPM and the fuelling / timing will be way less than ideal with an ecu that is programmed to run a Economy / Normal cam profile as opposed to a Normal / Power profile.
@abdulmaliktayeb16732 жыл бұрын
Is the D16y8 modified cam fit for D17A2
@operatoncreation63965 жыл бұрын
Nice
@matthewthaxton9344 жыл бұрын
Big duh on my part thanks I got it. Just panicked checking out eBay cams
@cookszn45244 жыл бұрын
How much would it cost for the parts and labor? An estimate ofc, great video
@PirateGarage4 жыл бұрын
Hard to say all depends on what you get the parts for, and I could only do the labor if your local
@whatthe3635 жыл бұрын
Hell yeah ive literally been waiting for this video lol
@BlackHmong85 Жыл бұрын
Will valves hit piston once vtec hit?
@johnwilson36623 жыл бұрын
Ware can I p buy that spacer to do that cam swap
@BTB_Works3 жыл бұрын
Could you please tell me what is the external diameter of the throttle body in a d16v1?
@snayderherrera21203 жыл бұрын
Where do you buy the manifold?I’ve been looking for it for 8 months and I can’t find it! Maybe you can help me??
@maxnguyen224 жыл бұрын
That was fast. How do you know if the timing belt didn't get off the bottom gears? What's holding it up from falling off?
@PirateGarage4 жыл бұрын
The belt tends to hold it's shape and I can check the timing after I put the belt back
@leroycompton623 жыл бұрын
I have the same car, and working on some of these upgrades. I have had a serious power loss in 3rd-5th gear, any ideas?
@NM-pl8so3 жыл бұрын
Does anyone know if I can do this to a d17a1 ? I have an 04 coupe 1.7l. I think its d17a1
@isaaces26225 жыл бұрын
I can use d16y8 stage 3 cam for d17a2
@PirateGarage5 жыл бұрын
Yes, that's why I did this so i can use a turbo cam when I put a turbo on this car