High Beam Lights won't go off: fix on the 2003 - 2007 Accord 4cyl

[@jasonvanderm983]

I had the same issue with high beams staying on all the time. I replaced the entire fuse box assembly with a used one from eBay for $59. This video helped me replace it, and it was very easy. Thanks for the video!

[@DIYAutoworksNG]

You're welcome!

[@m-c-m-]

Incredible instructions. Videos like this are what make KZbin great

[@DIYAutoworksNG]

Thanks. One of my older videos 😀

[@m-c-m-]

FYI anyone watching this, if you replace the whole fuse block and don't get one from an identically optioned car, you will introduce new problems. In my case, the HVAC controls and heated seats stayed on with the key out when I swapped a fuse block from a 4cyl LX to my v6 EXL. Now, if you remembered to turn everything off every time you shut the car off it was fine, if you forgot the battery would drain in a few hours. Ultimately I repaired mine like in this video.

[@DIYAutoworksNG]

One of my earlier videos🙈 Glad it was helpful.

[@jayc3110]

​ @Piyke DIYAutoworksNG UPDATE ON HIGH BEAMS NOT SHUTTING OFF: It was NOT a faulty switch as i had guessed. - I took it to a trusted and Skilled mechanic who solved it! - It was a faulty Headlight BULB! - The bulb worked but it was discolored with a blackened base. - He replaced BOTH high beam bulbs, and put back the 2, 10 AMP High Beam fuses and the problem went away! - No "DRL" light on dash and everything seems ok after that simple fix...

[@jasonvanderm983]

I had this issue come and go over time. Don’t be surprised if it comes back again.

[@YouTubeCertified]

Very helpful. Thank you very much sir.

[@DIYAutoworksNG]

You're welcome!

[@wolfdad1512]

I really appreciate this sir.

[@DIYAutoworksNG]

Thanks!

[@aamirbukhari2954]

Hello Sir, This vdo i have just seen as having same problem, once using high beam, wont come back until unless i knok / hit on Fuse boxes panel, i have change my indicator switch assembly as well, but no use, kindly suggest me should i need to change my complete fuse box with relay with same model or all 2003 to 2007 are the same? i hope i get your reply... as vdo seems long back in past

[@peacefin9503]

Will this also fix the parking lights lights as well?

[@DIYAutoworksNG]

I haven't really checked the circuit diagram to confirm if the relay for the parking light is on the same logic board. I will have a look and revert.

[@chachiquete]

Greetings from Argentina. I thank tour very detailed video! ¿does anybody know part numbers of the circuit board and/or the complete fusebox so I can buy it? Thanks a lot

[@DIYAutoworksNG]

Let me look this up and see what I find. Thanks for the compliment!

[@m.m1048]

Hi, I have 2019 civic and high beam on passenger side turns on and off( not flashing its more like dimming) some times even with car off. Is there way to determinate if its fuse box or bcm?

[@DIYAutoworksNG]

I haven't looked at the schematics for that car, but could be related. Do a wide search online on the issue and see if it reveals some leads.

[@chachiquete]

Another question: is it just plug an play or after installing a used board (or box) from another car it requires programming or something? Thanks

[@DIYAutoworksNG]

Plug n play!

[@kdr-ql7pz]

my lhb light doesnt work. switched bulbs checked fuses, etc (even though not the wiring), but my question is; does the circuit board have a failure mode for only one HB not working?

[@DIYAutoworksNG]

If you've checked bulbs & fuses, my money will be on the wiring. Do you have rodent activity around? On the circuit board, I'll have to check wiring schematics and revert.

[@kdr-ql7pz]

@@DIYAutoworksNG hello. No rodents that I know of. I believe the relay control module may be at fault. I just wanted a second opinion. Tnx

[@DIYAutoworksNG]

Great. Do update if you get to the bottom of it. Maybe the relay control module splits the 2 sides, not sure. Haven't been able to see the schematics though I'm leaning more towards wiring. Here's where a multimeter/power probe will earn its bucks!

[@kdr-ql7pz]

@@DIYAutoworksNG yes, i believe it is the wiring. I found the problem. it was close engough to the bulb and found it broke close to the end of the loom. My problem now is the washer. i believe its the same issue, but further into the harness where i cant reach. thanks for the reply...

[@DIYAutoworksNG]

Glad to know you found it. Half solved already.

[@bonscotty67]

Well.. there goes your extended warranty.. LOL my issue is my high beams won't go on. Would that be in the switch? The light comes on the dash showing high beams but the headlamps themselves don't go into high. Any help? Love your videos. Very helpful

[@DIYAutoworksNG]

😂. For yours, I'll start by checking the fuse for the high beam, and also see if there's 12volts/good ground at the electrical connector to the high beam bulb. Let's see what you find. Thanks for the compliment!

[@bonscotty67]

@@DIYAutoworksNG I've only been able to locate the left headlight high beam and right headlight high beam fuses and they're both good. That's why I'm wondering if it's in the switch. Although it feels sturdy, rigid and a good "click"... I was hoping I didn't have to take it out but unless there's another way..... Thank you for your quick reply BTW

[@DIYAutoworksNG]

I get. And just to be sure, it's not dead bulbs? Depending on what car it is, the relay may be easy to access...

[@bonscotty67]

It was just the bulbs!!! I'm an idiot. I should always start with the easiest fix first. Uuugghh..lol. I guess I just assumed the chances of both bulbs being blown were too slim. Nope. That's all it was. Thank you for "guiding" me back before I had the whole front clip dismantled. Lol....

[@DIYAutoworksNG]

😂. Happens to me too. That's why going from the easy to the hard is a good approach. Glad you got it sorted. I know a friend who was told her AC system was low on charge and needed a proper recharge. When I saw the car, first thing I observed was that the temperature setting was almost close to the midway mark. Next, I pulled the cabin filter... oh my gosh, one of the dirtiest I've seen! Took care of these 2 and things were back to Arctic temperature again🤣

[@fatihsorgun4452]

Hey, high beam never shut down. Can Eld change solve this issue?

[@DIYAutoworksNG]

Hello, I had exactly a high beam that refused to shut down no matter what. What solved it was the replacement of the circuit board I replaced in the video. I doubt an ELD replacement will solve the issue.

[@DIYAutoworksNG]

I should state that the actual problem is with a relay that is permanently attached to the circuit board. Because its permanently attached, the circuit will have to be changed.

[@fatihsorgun4452]

@@DIYAutoworksNG Thx for the quick answer

[@DIYAutoworksNG]

You're welcome!

[@Hoeech]

I had the same problem whereby even pulling the fuses did not turn the left highbeam off.

[@Monica-bd5pe]

How much does that cost to fix?

[@DIYAutoworksNG]

Hello, Thanks for watching this. Cost to fix will depend on your location and whether you source just the logic board I replaced in the video. In my location (Nigeria), I was able to get a used fuse box for less than $10.

[@GavinAM23]

Every time I start my cl7 all light flashes and the battery and the alternator is ok

[@DIYAutoworksNG]

You mean the lights flashes without being turned on? It sounds like a ground/short issue.

[@GavinAM23]

@@DIYAutoworksNG thank u for replying it flashes when di lights turn on roof lights head lights all lights ones its on

[@DIYAutoworksNG]

My money is on a shorts issue. You'll need wiring diagrams for the lighting systems to identify potential components e.g. relays that control the interior lighting. One thing you may do, is just to also check the underdash fuse panel, especially the ones connected to interior lighting. Ensure there aren't corrosion deposits causing a short.

[@GavinAM23]

@@DIYAutoworksNG thanks alot will do

[@DIYAutoworksNG]

👌🏼

[@anthonymccallister9295]

Why wouldn't you just change the whole fuse box instead of taking it all apart. Seems like a lot of extra effort.

[@DIYAutoworksNG]

Very good question. The cost for a brand new OEM fuse box was just much at the time.

[@ericjimenez8130]

I have this problem but with my fog lights

[@DIYAutoworksNG]

I see. Is this on the same year of Accord (2003 - 2007) or a different car?

[@DIYAutoworksNG]

This definitely sounds like a stuck relay. It's just about knowing the location of the relay and swapping it out.