Ford Explorer high beam stays on, Stuck on, high beam, ford lights

[@V.Hansen.]

This saved me at 3 am in 20 degrees when my high beams stuck on. Thank you!

[@carservicepro]

You welcome!

[@sonnycreativemedia9494]

This was definitely helpful!

[@carservicepro]

👍

[@JoeyJr702]

Good video. I had to change one in a 1997 lincoln Town Car, and that required the steering wheel removed first. Now I have to do a 2004 Ford Expedition, which the column looks the same. Спасибо

[@carservicepro]

Glad it helped, thanks 👍

[@javehrio]

Thanks man that really helpful cheers for that

[@carservicepro]

No problem 👍

[@malicksolutions8286]

Thank you. I’m experiencing the same issue and I’m about to go through the replacement process. Please send link for the part (2004 Ford Explorer )

[@carservicepro]

Hello, this is the OEM # 2L2Z13K359AAB for the vehicle I was working on and it is the same 2002-2005, You can get aftermarket from your local auto parts store like AutoZone or Advanced Auto parts, also plenty on Amazon, search for combination Switch,,,,let me know in a comment how you make out after installation, good luck 🤞

[@malikthompson4776]

just did this for my 2003 thanks 👍🏿👍🏿

[@carservicepro]

Glad this video helped you 👍

[@bodake2557]

Thanks for this

[@carservicepro]

My pleasure!

[@RalphNader-i9c]

dit dit dit dit dit dit ditdit dit dit dit dit dit ditdit dit dit dit dit dit ditdit dit dit dit dit dit ditdit dit dit dit dit dit ditdit dit dit dit dit dit ditdit dit dit dit dit dit ditdit dit dit dit dit dit dit LOL thanks tho, helped tons

[@carservicepro]

My pleasure 👍

[@verycaring2387]

Thank u❤

[@carservicepro]

You're welcome 😊

[@billhill839]

Good job!

[@carservicepro]

Thanks!

[@timothybutler2574]

I'm having an issue with my 06 Lincoln navigator that the high beam indicator does not show on the instrument panel, nor do the high beams come on. I've only changed out the 20A fuse. I switched out the Relay with my neighbors identical vehicle. Any help is greatly appreciated.

[@rebeccalankford9810]

I have a 2001 Ford focus with this issue. Any help to turn them off? Would it be the same process as this vechile?

[@carservicepro]

I am sorry I don't have the wiring diagram at this moment, however the easiest way is to check is to go to the switch controls the high beam and disconnect the harness while lights on if they turned of most likely it is the switch. Good luck!

[@killer13324]

so i have a question, because i just replaced that switch. the high beams work when i pull the switch back, but they don't turn on when i push the switch forward. Did Rockauto send me a faulty switch?

[@carservicepro]

Make sure it is properly installed first and try with ignition on, if still don't work it may be the wrong switch or it is faulty.

[@killer13324]

@@carservicepro it is. all connectors clicked in place. so what you're saying is rockauto sent me a faulty unit. great... 2nd time i used them and both times they've sent me faulty parts, never using them again

[@TheMcs33]

Low beams don't come on just high

[@carservicepro]

There is no magic answer to your question, you need to diagnose wiring, fuses, relays, switches, bulbs and etc.