I just bought a 71 Elco,,, can't wait to get a set of these. looks killer!
@klowny19697 жыл бұрын
i just did a complete fully detailed install on my channel on one of these systems on a camaro..great dash
@klowny19697 жыл бұрын
install video that is..
@Blaze_12212 жыл бұрын
I need a tutorial for 80-86 F series trucks!!!!
@cjones5821918 жыл бұрын
Wow I wouldn't want you working on my car using a pair channel locks to tighten down the coolant temp sensor and no Teflon sealant, not setting a good example!
@dalehall29936 жыл бұрын
CJ CJ GREG IS actually USING water pump pliers..NOT channel locks!!!😉
@DanneyTanner3 жыл бұрын
Still trying to figure out how to hook up the turn signal wires on my 70.
@DakotaDigitalTV3 жыл бұрын
Hey Thoran, We can help! Contact our Tech crew at 800-852-3228, or techsupport@dakotadigital.com.
@bigjon.62584 жыл бұрын
Coulda shown how the voltage and oil psi sensor was installed...Any hoo great video!
@DakotaDigitalTV4 жыл бұрын
Oil pressure installs in place of the stock sender/oil line (1/8"NPT) and there is nothing to install for the Volt gauge; the system monitors the power input to the control box.
@bigjon.62584 жыл бұрын
@@DakotaDigitalTV wow...thanks!!
@Turbochapman9 жыл бұрын
I would like to use this system in my 74 Nova with a LS1 & 4l60E conversion. I'm using the new Holley Dominator system to control the engine a transmission, is the VHX compatible with my set up?
@DakotaDigitalTV9 жыл бұрын
William, Thanks to the supplied sensors, our VHX systems can be used in nearly any application! The flexibility afforded by the solid state sensors for Oil Pressure, Water Temp and Speed, complete with weather-pack style harnesses allow VHX systems to find a home in hot rods of all types, regardless of drivetrain choice!
@Roguestatus6506 жыл бұрын
Ok but how did you calibrate the speedometer?
@DakotaDigitalTV6 жыл бұрын
There are two methods to calibrate the speedo; both listed in the installation manual. Do you have a system you need to dial in?
@Roguestatus6506 жыл бұрын
DakotaDigitalTV yes I’m trying to calibrate mine
@lawrencestelzer37728 жыл бұрын
Have it all hook up need zero the speedo for the tires with the GPS
@shaddtshudy99844 жыл бұрын
I did an ls swap in my 69 chevelle and my th400 had a vss connection that I currently have my psi harness connected to. The vhx kits says to plug your supplied sensor into the vss, would i wire my vss wiring from my swap harness into the dakota digital box?
@DakotaDigitalTV4 жыл бұрын
Hello! There are a few options and details we need to nail down here; please contact us directly at: techsupport@dakotadigital.com.
@blakebiltwell57 жыл бұрын
Is this the silver face or white face?
@DakotaDigitalTV7 жыл бұрын
Silver Alloy.
@ribbels22 Жыл бұрын
that showed me absolutely nothing but how everything is hooked up afterwards, I need to know where each wire goes. Detailed instructions not oh its simple, no its not
@abdullaalsuwaidi397110 жыл бұрын
Does it work with ls conversions
@DakotaDigitalTV10 жыл бұрын
Thanks Abdulla, Absolutely! That is one of the benefits of this package, our sensors are designed for either stock, modified late-model LS conversions. Because our system includes the proprietary sensors, this allows a wide range of flexibility.
@alcc49649 ай бұрын
Water temp sensor is fugly. Wouldn’t want that looking at me when opening the hood. Relocate it
@soychingon.68087 жыл бұрын
somebody in Dakota digital speak Spanish
@DakotaDigitalTV7 жыл бұрын
Hello Eduardo, Unfortunately not, however feel free to email our crew at sales@dakotadigital.com, we can utilize online translate tools!