Daniel Defense DDM4 PDW 300 Blackout Review

Рет қаралды 13,588

Жыл бұрын

In this video, we review the Daniel Defense DDM4 PDW 300 Blackout. Does it live up to the Daniel Defense hype?
Disclaimer: These videos are strictly for educational and entertainment purposes only. Imitation or the use of anything demonstrated in my videos is done AT YOUR OWN RISK. All work on firearms should be carried out by a licensed individual and all state and federal rules apply to such. We (including KZbin) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any our videos. We do not endorse any specific product and this video is not an attempt to sell you a good or service. We are not a gun shop and DO NOT sell or deal in Firearms. Such a practice is heavily regulated and subject to applicable laws. We DO NOT sell parts, magazines, or firearms. These videos are free to watch and if anyone attempts to charge for this video notify us immediately. By viewing or flagging this video you are acknowledging the above.

Пікірлер: 39

@paulg1827 7 ай бұрын

If the gas port was misaligned, it would constantly jam, not intermittently. DD is a high-end manufacturer; they are not going to put their rifles together incorrectly. I have contacted DD, and they said the largest issue they find with jams, is cheaper ammo that is not always correctly charged. It would have been an important item for you to describe what brands of ammo you were using, there are real differences in ammo quality in 300blk and in todays inflated market, lots of people are buying substandard cheaper ammo that can cause issues.

@JayMatts 6 ай бұрын

Love the videos keep up the good work

@dcsking9042 20 күн бұрын

With a much as it jammed in this video, I wouldn’t spend my money that❗️ Especially at its 2k+ price point. For that amount of money it has to be more reliable. Thank for the review, great video.

@mwmag 2 күн бұрын

That's what we were thinking. Trued both springs and same results.

@johnbeyke8486 Ай бұрын

I had the same jamming problems the first time I ran a supressor. The bolt fouled after a few mags, so I swapped out the bolt to a nitride coated bolt, lubed it, and the weapon has run perfectly since. The old bolt (total of 300 rounds) I attempted to clean but Lord, it was carbonized and completely funky.

@taddhoward9975 Жыл бұрын

Did you guys review the stock gun? Doesn’t look stock. Looks like y’all put a longer hand guard on there, which brings to question the integrity of the review.

@mwmag Жыл бұрын

That was stock. Only adjustment was wave supressor. Nothing else was changed.

@gregoryrock1926 Жыл бұрын

I agree with the comments here. 1) yours doesn’t look like stock. 2) I have one, never had any issue and just about all of the reviews on it, and yours is the only one with these issues. 3) if you altered the stock, then you negate your review…try again!

@1rstTry 10 ай бұрын

@@mwmagwrong. Something is off here

@vmigrad1 3 ай бұрын

Hey guys when is your part two coming out? I’m experiencing the same thing with my DDW

@Skinski7 Жыл бұрын

Good review. Mine runs pretty flawlessly with no malfunctions to speak of. I don''t have a can and just run supers though.

@mwmag Жыл бұрын

Thanks Skinski7. Once we get this going it is going to be a great gun for sure. Thanks for watching.

@deebee4575 2 ай бұрын

Just got mine. Suppressed and threw the red spring away. 500 rds with not a single failure.

@ericward9159 Жыл бұрын

Mine came with 2 buffer springs. One for use with a suppressor & the other one without a suppressor sub or supersonic.

@1439Smoke3914 Жыл бұрын

They just had the wrong spring. You nailed it.

@mwmag Жыл бұрын

For what we were shooting we had the wrong spring. Owner didn't bring them both. That's why we mentioned the need for an update video. Thanks for watching!

@EverythingFilmmaking Жыл бұрын

I will tell you from experience..changing the spring made mine do this.. put original back with my can..runs great

@blackmane8949 7 ай бұрын

Exactly mine came like yours with the same explanation

@DH5354 Ай бұрын

Which spring is suppose to be used for suppressor?

@Piscis1949 Жыл бұрын

Now I am confused. You guys say that one spring is for subsonics and the other is for supersonics, but DD says one is for suppressed and the other for unsuppressed, sub or super. I'll wait for the clarification, but meanwhile I've just bought one to be run unsuppressed, as suppressors are illegal where I live.

@richardj3715 8 ай бұрын

That is correct.

@EXOTICLEX 3 ай бұрын

I have the same issue with mine. Jams a lot.

@cphilip33 6 ай бұрын

Is there a follow up to this video on how to fix? Mine has the same issue with both supers and subs

@jaysondee7733 5 ай бұрын

Apparently not and that is kinda lame of them! Did you swap your spring per the user manual?

@timb8970 10 ай бұрын

I thought the springs were for suppressed and unsuppressed? But I’ve been wrong before.

@deebee4575 2 ай бұрын

If you’re always gonna shoot suppressed, throw the red spring away.

@BlazingGunner Жыл бұрын

Nice video, I have the DDM4 PDW and yours does not look correct there is no way to get a suppressor under the hand guard like yours. I use the spring that came in the gun with a Omega 36M suppressor on it and it runs flawlessly with super or subs. The only thing I changed was the trigger I put a CMC flat trigger in it. the spring that is not in the gun is for unsuppressed subsonic ammo.

@terrycurry6515 Жыл бұрын

Agreed. They tweaked it and, maybe they are having a cycling because of the physical modifications to that gun. I have this with a dd wave can and it runs pretty well the 220 gr subs.

@JLandoBando 8 ай бұрын

I was wondering the same thing there aint no way thats the ddm4 pdw mine is way shorter

@OFCINC 8 ай бұрын

@@JLandoBando agreed they F it up 🤣

@blackmane8949 7 ай бұрын

Mine runs greatly and a representative for DD told me that one spring was for both super and subs the other spring was for sub sonic only