how to setup ANY MIDI Controller with Mixing Station to control your mixer

[@the_wind_sings]

Thank you, Daniel! Googling all over this, watching all kinds of videos and yours was the only one that helped.

[@LwaziSidinile]

This is insanely useful info. The possibilities are endless

[@Allthewrongkeys821]

I've been waiting for this video for a long time. Thanks as always!

[@robertrickman3531]

Always great information..thank you Daniel.

[@raynaldo2000]

Great video! Thanks for the information.

[@catalinivascu]

Great info! Is it possible when you press select on a channel on the X32 to select the corresponding channel in superrack? I didn’t really made a huge research on this topic but it will be amazing if someone finds a way to do it!

[@danielkharrat]

@@catalinivascu no because the channel strips don't send midi information. Only the DCA bank of faders sends midi

[@catalinivascu]

@@danielkharrat good to know. Thanks!

[@josephsandholtz5675]

Daniel, your channel has been extremely helpful in learning how to effectively use a digital mixer. I have a question: is this possible to do with a MIDI controller that is connected directly to the xr18 via 5 pin din MIDI?

[@danielkharrat]

@josephsandholtz5675 if you connect directly to the mixer you have to program the midi controller itself to the CC numbers. Do to what i showed in the video the midi signal has to go through the mixing station app first

[@ottobaer]

There is a little mistake in your video. at min 7 you create the buttons for the midi swap and you name them Mute swap select 1/2. Your Swap Action changes all Controls with name starts with Mute, so your Mute Swap select buttons also changing the active actions. Either rename your Mute Swap Buttons or change the batch actions to only affect controls with names starting with Mute- instead of Mute. this way you don't have to add the additional swap actions. another tip: if using batch action swap, change the action to 'only on' so if you execute the swap action a second time it does not reverse to the previous state

[@luisramonpachecoclaudon9963]

Saludos mi estimado ingeniero de audio. Quisiera si es posible que hicieras un vídeo tutorial de como rutear o mandar los efectos al monitor , ya sea la rever o el delay para las voces ? Te mando un fuerte abrazo y las gracias Anticipadas por tu ayuda y atención.

[@luisramonpachecoclaudon9963]

mi nombre es Luis y vivo en la ciudad de Mérida Yucatán México.

[@danielkharrat]

kzbin.info/www/bejne/rIuvaoepfZJoqpI

[@davidhanson9280]

On Mac, does this work with the IAC driver?