how to clean your Penny Board

how to properly clean and restore your Penny Board into like-new condition. this video was hella satisfying. Penny Board giveaway at 2k
/ dayswithjase
/ dayswithjase
music wanted!
if you are a music producer and have some dope beats that i could use please dm me @dayswithjase
equipment used: sony a6500, sigma 16mm 1.4
like it, subscribe, and watch another video

[@Itsmeight]

Awesome before riding my board it felt like going on a old busted road, but now its smooth like a brand new board.

[@flashynostromo]

Me : *cleans it for 40mins+* Also me : *gets it dirty in less than 5mins of riding*

[@defaultbandaid7909]

A good drill and pressure washer can make this job take less than 5 minutes.

[@daanschone1548]

I understood wd40 is bad for bearings because it also desolves the lubricants and not just the rust. Better use regular bearing cleaning methods like bones speed cream.

[@dayswithjase]

ooooo i’ll have to try the speed cream next time. ive been using wd40 on my skateboards forever ass it’s super accessible and cheap and never had any problems with it! i’ll be sure to make an update video here if it causes any damage in the long run :)

[@daanschone1548]

@@dayswithjase yeah, I don't know if it's really that bad for your bearings, but it is what everyone says. If it works, it works right. :)

[@maritje4225]

Loved this video! I recently bought a beat up penny board so I’m looking at videos to figure out how to fix it up!

[@dayswithjase]

glad you found my video homie! ☺️

[@scorpio2t]

Just got a penny board haha got a minisub keyboard and thought I needed a small board to travel on 😂

[@joeltheg4844]

Really been wanting to get into skating boss staying tuned 👍

[@dayswithjase]

skating is good for the soul 🤞🏼

[@sanianazira1810]

Do it ! Have Fun :)

[@FlowJunkie65]

Hey, jasey. I would only add that WD-40 wicks water away from the metal parts that you spray it on, so if you're out riding in water, when you return home you should spray some WD-40 on the metal parts that came into contact with the water, then dry off with a towel after it has had some time to work into the metal. Relatedly, by spraying WD-40 into your bearings, you're actually dissolving any lube you might have on your bearings and hence placing your bearings at risk for developing rust. So, for a more complete cleaning AND lubing, you'll need to take apart each wheel, clean the bearings, and lube them with an appropriate lube (e.g., Bones Speed Cream). But, a lot of guys don't want to hassle with doing that and instead will buy like Bones Reds bearings and just replace their old bearings with these since they're inexpensive, roll very fast, and make it so easy to replace bearings on a regular basis so you don't have to mess with all the taking your bearings apart, cleaning them, lubing them, etc. But, they sell bearings cleaning kits pretty cheap if you want to save your old bearings and keep those clean and lubed.

[@user-ys8sr6gc1p]

Fake news bucko

[@dorkyderpterio8649]

Hey man quick question! What size or measurements should I get for penny board bushings?

[@leta-_-1405]

My penny board just came today so it will probably take awhile for mine to get rusty especially since it is winter so I can’t even use it outside for another 6 weeks 😹

[@dayswithjase]

im in the same boat my guy. ridiculously cold here and haven’t been able to use mine for so long now :(

[@nagolllehctim6475]

Use sos pad for rusty parts

[@preslavnikolov923]

Bro I bought a board for 150$ whit carbon and I stop and the wheels are all rusted shoud I give it a chance and learn again

[@defaultbandaid7909]

I’d like to say, you can totally do this with tap water, you just might notice streaking when it dries. He doesn’t cover this in the video but distilled water is pure water without any minerals in it, that’s why you’re not supposed to use it for drinking water because many of the minerals in water give it the taste we are used to an are actually healthier than non mineral water. However, this same reason we don’t drink distilled water is the same reason it’s so good for cleaning. Since there’s no minerals left on the cleaning surface when the distilled water dries (due to minerals not being present in the Distilled water), the finished product with always look better with distilled water. I hope that clears up why he used distilled water but it’s not 100% required. At the end of the day a board cleaned up with tap water and serviced with WD-40 is going to ride a lot better than a crusty board you’ve not cleaned at all.

[@Julian76760]

DO NoT use wd40 ever

[@RussianTroll-ie6gr]

Don't use WD40 on the bearings!

[@broke_Homie_Kwan]

This was OG

[@dayswithjase]

gvng

[@YoussefAhmed-bn2ip]

If u want rust to come off better try sand paper them 👍

[@happinessso23]

Giveaway emded?

[@dayswithjase]

giveaway at 2,000 subscribers!

[@kirtdaffneytulagan701]

I cant get the giveaway penny anyway cuz i live in philippines

[@dayswithjase]

it’s open to anywhere that the official Penny Board website ships to!

[@scorpio2t]

Check out ammonyc he details cars. I mean they are crazy cars but check him out if you want to learn how to clean it. His products are on another level!!! And Cali compliant. Rust is just one thing he shows how to clean 🦾

[@jvarevalovlogs5311]

Can you send it in philipines 🇵🇭 Your give away💓😭🙏🇵🇭

[@yousefibrahem5031]

put any rusty thing in vinegar and it will come off

[@dayswithjase]

damn im gonna need to try this

[@PXRCXPTIAN]

@@dayswithjase did it work tho?

[@xshow5809]

классный пенни! особенно когда чистый))

[@dayswithjase]

i don’t know what this means but thank you for the comment

[@happinessso23]

@@dayswithjase he said:cool panny.More than its clean 🇷🇺❤🇷🇺

[@anabrang224]

“cool penny! especially when clean”

[@pavielin]

:)

[@dayswithjase]

:)