DAYTIME RUNNING LIGHT DELETE - How to Delete Daytime Running Lights in UNDER 5 MINUTES ON THE MK4 VW

[@SanDiego_VDubLife]

Is it possible to disconnect the wire instead? By removing it from the harness?

[@colewilkie]

thank you, i needed this for rolling photos...super helpful dude

[@AutoScholarwithMrB]

Thanks for watching Cole!

[@JJAires-h8f]

Awesome... Thank you. Couldnt be easier

[@AutoScholarwithMrB]

Glad I could help, and thanks so much for watching!

[@WonsPhreely]

So after you do this, can you turn on regular headlights? Or only high beams? Or is the no high beams on these cars?

[@ProjectDv2]

This has nothing to do with the high beams at all. Your headlights will work normally. This is only disabling the Daytime Running Lights (DRL) circuit. That pin feeds power to the headlights whenever the key is turned on and the parking brake is down. It *only* feeds power to the headlights, not to the taillights, not to the marker lights. Everything else, including the headlights, are fed power via other pins when the switch is turned on.

[@the.pirate.empire]

Hi Quick question The front right yellow running light doesn't work. Its not: The bulb The fuses The carriage The headlight assembly The switch (shown in this vid) What else can it be? Wiring? The blinkers and 4 ways all work and its the only thing not working. Can't I just use a single filament in both right and left for just the blinkers svs 4 ways and completely forego the running lights?

[@Wolverine249]

My dimmer switch burn out the wires or go but i dont have any dash lights

[@salemcripple]

Ok, now here’s a question. What if I want different lights to be my DRL?? I have Halo style headlights in my 03 Jetta. When driving I want just the halo on, not the whole headlight.

[@AutoScholarwithMrB]

I would run a new wire to the headlight bulbs that gets power when the key in on. Some people will get a piggy back fuse adapter and wire it off a fuse that gets power when the key is on. You would just have to run the power and make sure the halo bulb is grounded to the chassis.

[@ProjectDv2]

Or just connect the wire for the DRL circuit to the pin on the headlights for the angel eyes.

[@j.wagner8639]

Best video man! Thanks!

[@AutoScholarwithMrB]

Thanks for watching!

[@Godschosen195]

Hello, would this trick work on my 07 VW rabbit 2.5L? DRL are annoying plus my passenger side headlight just gave out.. lol

[@AutoScholarwithMrB]

No, I believe that is a completely different system

[@cosimobruno9731]

Thanks, very easy.

[@brandonruhl4525]

any issue? work well? about to do this.

[@AutoScholarwithMrB]

No issues, this is a pretty common mod. Thanks for watching!

[@ProjectDv2]

I just replaced my headlight switch with a European switch that doesn't have a DRL circuit but adds the parking light position.

[@PassionForGrammar]

I don't need the headlights on in the middle of a bright sunny day, wearing the bulbs out faster and pulling on the alternator for nothing. Might save a tiny bit on gas mileage with this, thanks.

[@danijeljerman9461]

Just 1 Quick question man... When I give contact with key the lights are on but switch is in 0 position...... So long story short I cant turn off the Light... So my question is is it posible to turn off that fucking automatic thing and Just Use the Light switch like it was original supose to? 😁🤓🤔

[@AutoScholarwithMrB]

Yes, this video should make it that way with the pin modification.

[@danijeljerman9461]

A, ok, Its not An eazy way... My car have diferent Light switch... Ok thx anyway I'll try diferent something else

[@carlogambino8594]

I have a 2005 Jetta 2.5 and my switch does not look like this one ??

[@AutoScholarwithMrB]

You have a late 2005, which is a mk5, and they are different than the mk4

[@LeeHartley]

Necessity