Daytime running light LED , DRL, fix for Yukon, Tahoe, Suburban, Escalade 2014-2020

[@domingorodriguez3077]

insane process to take the headlight assembly out, like you said lol. in older GM truck its 2 bolts that can be turned by hand, so much easier. that truck next to this GM SUV is probably 10x easier to work on

[@HouseDoctorRay]

True! I love my '06. As long as the frame holds up I'm keeping it.

[@kupa18]

Dude. Thanks. I needed this I just can’t pay $1,000 for a new headlight

[@HouseDoctorRay]

You and me both brother. It's tedious getting it apart so take your time. Keep putting it back in the oven to keep it warm. Good luck!

[@pEwTeRsS99]

Not all heroes wear capes 🙌

[@HouseDoctorRay]

Thanks Tony.

[@jthomas7631]

You the man Ray ! How often do you change your oil and ATF ? Any other major repairs on the Yukon thus far?

[@HouseDoctorRay]

Oil 3,000-5,000 miles Transmission 50,000 kzbin.info/www/bejne/b2naqHR5lpx-jKssi=Ai2T8Tm_OP1_cmaj I did have a fuel line go and the vacuum pump at 150K kzbin.info/www/bejne/gGeTqoitmp6DY6ssi=b-H7nL3uWCvPOyB7

[@johnnyrockets3590]

Do you know what’s what on that board? I have an issue with my passenger side headlamp but it’s with the turn signal. There’s moisture in the assembly so I’m assuming it’s corroded too.

[@HouseDoctorRay]

Could be corrosion inside the socket for the headlight bulb. Check out GMtruckclub.com. A lot of very helpful people on the forums.

[@MalikIdreesMasood]

PCB looks absolutely fine to me also how can you say without testing it? does not make sense to me, IDK how no one spotted it...

[@ryanhowe9850]

Going to attempt this now hope it works !! I have the same year & same light issue

[@HouseDoctorRay]

I saw another one last week. Same side was out. Just weird. Just go slow taking the light apart. Keep putting it back in the oven as needed.

[@traynham]

So this works for a Tahoe?

[@HouseDoctorRay]

Yes but the fuel line may be different because mine is an XL.

[@aguilar5185]

Is it possible to just buy a new board?

[@HouseDoctorRay]

There are companies that will rebuild your light for you. I was not able to find the board, only the complete light.

[@hgvenom]

03:00 was that sarcasms... XD

[@HouseDoctorRay]

It's so dumb. On my Sierra I just unclip a rod and the headlight comes right out.

[@henryguerra2008]

My lights are realy low and the tail lights not work any body not Wy

[@HouseDoctorRay]

Poor design. Check the link in the video description for a fix of the taillights.

[@travisbw]

Where is the ballast located?

[@HouseDoctorRay]

Not sure what you mean.

[@awakentruth1116]

You take the entire front clip off, and pull the light before advising to check the fuses at 3:40... Lol 😂 AHHH SHYT, IT'S A BAD FUSE! Now I gotta put everything back together 😢 😢😢😢

[@HouseDoctorRay]

It's good practice. Always check the easy stuff first.

[@mrcrux213]

❤ Love it!!!

[@chelseaclark8251]

Mine only works sometimes 😢

[@HouseDoctorRay]

That's how it starts. There are companies that will rebuild them but you have to mail yours to them.

[@Faris047]

Thank you it's worked for me

[@HouseDoctorRay]

Glad you were able to get it done.

[@hailymanns7382]

Bought 2 2016 headlights for$ 290 brand new

[@HouseDoctorRay]

Where? I've already had to solder both taillights once and one is falling again.

[@BryanHarris-m5l]

Thx

[@claytonkeyes7041]

Amazing

[@HouseDoctorRay]

Thanks Clayton

[@michaelgreene5525]

Impressive

[@HouseDoctorRay]

Thanks Michael

[@edmonddantes9975]

Didn’t work for me.

[@HouseDoctorRay]

Sorry dude. I would double check those solder connections. They're tricky. Also double check the fuse.

[@CaseyE-bn3vk]

Where is the fuse located for the daytime running lights?

[@frutbum]

Nice

[@HouseDoctorRay]

Thanks

[@TornGucci]

I have some headlights you can buy off me for $1k each 😂 how many you need?

[@HouseDoctorRay]

I'm surprised with all these things on the road there isn't an aftermarket option at a reasonable price.