Raw POV video of driving supercharged Mazda MX5 with BMW 7 speed dual clutch DCT transmission controlled by HTG TUNING GCU standalone Gearbox Control Unit!
Пікірлер: 53
@DJHeroMasta2 жыл бұрын
Hell yes! This is clean as hell! 300HP, Supercharged, DCT, light weight car! This is what I want to do with my BRZ!
@SLO_MZ32 жыл бұрын
there is a k series swap kit unsure about the dct working or fitting though
@DJHeroMasta2 жыл бұрын
@@SLO_MZ3 Ah, I’m not too big on swapping. Not against it, more so wanna keep the stock motor and build upon it over time.
@markburley94432 жыл бұрын
This is brilliant to show the difference between manual and auto modes and the shift speed dependent on throttle loads. I'm getting there slowly with my build!
@gouinloud5850 Жыл бұрын
Wow, I'm just blown away at how well this integrates into the stock components..
@Paul2.4T Жыл бұрын
Good clutch slip tuning, a bit of bog from a stop but it moves! Amazing work
@millll111lllI2 жыл бұрын
Is it stable under hard braking with multiple downshifting? Rear tires don't lock up without blip?
@justjack32362 жыл бұрын
I know that answers to uncomfortable topics are avoided, but it is really worth correcting what is happening with the incidence of this GCU ...
@HTGtuning2 жыл бұрын
What is happening is growing number of happy users around the globe with winning prizes in leagues and competitions! Proper use of GCU delivers desired performance, stability and safety for the transmission itself.
@jeremiedaniels8132 жыл бұрын
What does this even mean?
@MethmalDhananjaya2 жыл бұрын
Maybe you should give a complete point instead of b!tching around?
That looks pretty good 👍 what adapter plate did you use to mate engine and transmission, what clutch and drive shaft works with this setup ?
@yotam1865 Жыл бұрын
Hi, what bracket did you make between the gearbox and the differential
@mikegranobles3 ай бұрын
Hi why no blips? Low power? If you were to decelerate aggressively and down shift say from 5 to 2
@MofabLLCDenver Жыл бұрын
How many hours do you have getting this to drive well
@oscarlainz2 жыл бұрын
I want this for an Nb so badly
@X7rocks2 жыл бұрын
Just flexing driving this car one handed lol
@GGaPnono10 ай бұрын
기어딘수체커기 정보가 궁금합니다
@michal5862 жыл бұрын
Może byście się odnieśli do tego co mówią o awaryjności waszego urządzenia....
@HTGtuning2 жыл бұрын
Awaryjność urządzenia nigdy nie była problemem, a w razie potrzeby sprzęt jest objęty gwarancją producenta, serwis jest dostępny oraz wsparcie techniczne.
Is the lag between pulling the paddle and shift occurring correctable?
@HTGtuning2 жыл бұрын
Yes, shifting speed is fully adjustable. On light loads there is no point in having them that quick tho, because why? ;D
@ferrarikingdom2 жыл бұрын
@@HTGtuning because fast makes sweet noises haha . Used to have a dct m3 and drove 99% of my 89000 miles total on fastest shift speed .
@pumarolz2 жыл бұрын
Ok I’m gettin one exactly like this one
@theronbacev2038 Жыл бұрын
i'm sure you have 9k for the getrag trans, tcu knowledge of adjusting torque tables, and the mechanical abilities to do this 😂😂 forza kids are ridiculous
@pumarolz Жыл бұрын
@@theronbacev2038 with enough money patience and passion anything is possible “majorly by *money*
@eduanwessels42922 жыл бұрын
Hi what is the name and part number of the steering wheel. Also want to get this steering wheel with the paddles. Thanks
@BartekCastelli-official2 жыл бұрын
htg-tuning.com/shop/htg-tuning-mps-paddles/
@eduanwessels42922 жыл бұрын
@@BartekCastelli-official thank you sir
@CDI.Motorsport10 ай бұрын
So how does a clutch pedal work with this application, is it just used as a switch ?
@HTGtuning6 ай бұрын
It works like electronic throttle, It's just clutch by wire. It behaves like manual car. Btw Nissan 350z gas pedal is the best affordable and quality option for clutch by wire pedal.
@grim-ripa2 жыл бұрын
Sooo I can do this to my '91 na with the help of your BP b6 adapter plate right?
@X7rocks2 жыл бұрын
Trust me I've been running around trying to find out direct answers for this very question lol
@HTGtuning2 жыл бұрын
Yes, all parts for pnp swap are available! Drop email to sales at HTG-tuning.com for all the details. It makes car so much fun to drive!
@bevondymicmic52242 жыл бұрын
Planujecie dodać do GCU pokrętło do zmiany działania skrzyni biegów ?
@dominik63262 жыл бұрын
Na razie to by pasowało ogarnąć to tak żeby nie rozpierdalało co chwilę skrzyń.
@michal5862 жыл бұрын
O to to dokładnie, kiedy to w końcu kurwa będzie działać.
@bevondymicmic52242 жыл бұрын
@@dominik6326 Czyli co lepszy sterownik Lamika czy on robi równoeż podobne problemy
@HTGtuning2 жыл бұрын
Tryby jazdy (comfort, sport, sport+) zostały dodane w nowej wersji testowej która tworzymy na potrzeby Porsche 911 i będą opublikowane w nadchodzącym oficjalnym update. A poprawne ustawienie i korzystanie z oficjalnych firmware zapewnia gwarancję stabilności pracy i bezpieczeństwa dla skrzyni biegów. Sam sterownik nie uszkadza niczego, tylko jego błędne wykorzystanie
@RisupFIN2 жыл бұрын
I wish there were an adapter plate for a vg30dett
@zer0luink11 ай бұрын
I did this swap on my z32 with the vg30dett i posted a video on my channel doing a small pull as well. Just trying to sort the paddle shifters now
@matspyt6031 Жыл бұрын
Co to za łopatki?
@ernesth19852 жыл бұрын
Chce to w mojej maździe!!!!!!
@ernesth19852 жыл бұрын
Jaki koszt tak orientacyjnie??
@HTGtuning2 жыл бұрын
@@ernesth1985 Wrzuć wiadomość na sales(at)htg-tuning.com :) Orientacyjne koszta też możesz znaleźć na naszej stronie.
@adinatadilaga9959 Жыл бұрын
What transmission?
@HTGtuning Жыл бұрын
DCT GS7d36sg
@matspyt6031 Жыл бұрын
@htg tuning Co to za model łopatek?
@macedonianlad6 ай бұрын
not bad but bmw automatics arent usually very reliable