Рет қаралды 31,349
The truck finally made some noise! It's always a huge milestone hearing a project car run for the first time. I'm finally in the home stretch on this c10 build. My cheap fuel system worked like a charm, now I need to wire everything up properly so it's operated by the key. Lots and lots of odds and ends before this short box is rolling down the street. Up next is cooling system, brake system and a custom drive shaft. Maybe even some paint? who knows.
The motor is a stock 5.3 from a 2000 Silverado. Unlocked with HP tuners and kept the stock tune. I used the factory accessories with a shorter belt to eliminate the power steering. Kept the stock truck oil pan and raised the motor a few inches with home made motor mounts. Factory manifolds were used and piped into some 3 inch mufflers. A cheap Ebay in tank fuel pump was used to feed the injectors. This was a very simple but effective swap.
A huge thanks goes out to @ziptiesnbiasplies make sure to check out his wicked channel!
Also Thanks to @1963impala2drWaylonWire for a couple of shirts and priming Danielle up to do some singing!
Check out the Merch Store:
teespring.com/stores/dd-speed...
Send us Junk:
DD Speed Shop
Po box 42041
1881 Portage ave
Ferry Road RPO
Winnipeg, Manitoba
R3J 3X7