What Broke On My 1971 Dodge Demon 340 At The Big Ice Cream Cake Race?

I drove over 6,000 miles round trip for this race, and all I got was a couple t-shirts, a stolen timing light, an ancient compression tester, some melted ice cream cake... oh yeah, some ridiculous comments, and some broken Demon parts. So on today's episode, I answer a pressing question from the viewership - what actually happened? At the same time, I respond to a bunch of those comments, and possibly lose my cool for a minute. Allegedly.
‪@UncleTonysGarage‬ ‪@JustMoparJoe‬

[@rustandmagic]

So to sum it up, the trip was 100% success, ramp truck did a great job, lots of fun and enough power and traction to break the Demon

[@DeadDodgeGarage]

My thoughts *exactly!*

[@PatandDoopypoopy]

​@DeadDodgeGarage I put my eggs in the 'it's the journey and effort' basket. It's guaranteed success and EPIC memories. I think you are of a similar vibe.

[@jeffhutchins7048]

​@RandOmtext-dw4xtI agree, you're weird, JUST KIDDING!😊 If you're weird so am I, which is ENTIRELY POSSIBLE, as I enjoyed that video too. As an aside, I would have enclosed the entire rear dovetail while I was building it, then REGRETTED it after I saw the video!!! Jamie's way is WAY MO' BETTA!

[@batmanlives6456]

@@jeffhutchins7048hey , you got to hang out with uncle Tony !!! So that’s cool !!!

[@blackscotydog]

I am not a drag racer ...Just a lover of Manual transmissions......You will get there.

[@That_AMC_Guy]

What nobody has really mentioned (I don't think) is that a lot of drag racing is in your head. You've gotta keep your cool above all. Yes, you're inexperienced, and yes it's VERY exciting. Not that the stakes were super-high, but yeah, even I'd have butterflies lining up against Uncle Tony and having tons of people watching me. *SO* many variables to take in. But hey, that's what life is all about.

[@brianandglendaharkin9457]

727 is king to the front 👍🏻🇦🇺.

[@thisisyourcaptainspeaking2259]

727 automatic is always in the right gear.

[@patrickmonaghan8555]

I loved them until i had a bi-lateral knee replacement

[@majorpayne5289]

Good stuff. I remember back in the early 70s as a lil kid, out in the gravel driveway w/ my Dad. Pulling the axel. Showing me the spline. His blue 66 Pontiac Tempest. I guess he was pissed but only thing I ever recall is he could fix anything. (RIP POP) Happy Father’s Day to all the Dads!

[@adeeponionbrah]

Take a day off to sit and stare at that nice Demon. What an excellent piece. Nice to have you back.

[@musclecarmitch908]

Glad it wasn't something catastrophic! To me that's the best thing that could've broke! Seems so minor compared to exploding a rear end or a clutch, transmission or U joint and driveshaft! I don't want to see anything damage that beautiful pristine Demon's body! Great news!👍

[@DeadDodgeGarage]

Totally agree. Me neither…

[@bluesfan4life_945]

KZbin's definition of Insanity : Content creators reading every comment on all videos they upload. Don't let the mouth breathers dictate your Sanity. I watched the road trip video last night. Good stuff. Glad you, the truck, and the Demon made it home safely.

[@That_AMC_Guy]

I'm more of a knuckle-dragger than a mouth breather.... lol

[@peterdollery629]

Great you slipped in the Herb McCandless reference!! Geez, next thing you know your two early drag racer compatriots Sox and Martin might get a mention! Thanks for the video and remember, omelettes and eggs, or something….

[@J.R.in_WV]

Herb was the master of no-lift shifting with the 833 4 speed…..when guys actually flat foot them down the track like that I love that sound when they have it pulling hard, almost tach’d out, then that quick little 100 or 200 RPM flare where they put a little pressure on the shifter towards the next gear then at the time tap the clutch and go from a little pressure to SLAM that sucker in the next one. Nothing like that going on at an EV drag race

[@MrGingerdavis11]

As a stick shift racer, I enjoyed watching your vids. The engaging of the clutch has to be done quickly, but, not too quick. It's a thing that takes practice. If you can get it so the engine starts at maybe 4,000, and by fancy clutch pedal work, drops slightly to 3000, you won't have any bogging. The weakest link acts as your wick to break. Make that your tires. Bring the PSI up to hell, high 20's on a good prepped track. You dodged a bullet with the drag radials. they dead hook, or you blow through them on a stick car. Thanks for all your content!!!

[@DeadDodgeGarage]

Damn good pointers! That balance is what I need to focus on next. Thank you!

[@Raycr]

Jamie, kudos to you for working through the ups and downs of racing a 4 speed car! I will absolutely not tell you what you're doing wrong. Cause I don't know anyhow

[@That_AMC_Guy]

How do you get to Carnegie Hall? hehehe

[@codyhollinger6531]

I enjoy seeing you use the Demon for its intended purpose. The four speed makes it interesting. I'm excited to see you master it. Keep it up!

[@brivas3343]

Add me to the cheerleading section. I glad that you're running a 4 speed. Back n the day four speeds ruled the streets (and strips). Ronnie Sox was almost god-like to us Mopar fans.

[@allanmarshall208]

Experience is the best teacher. You break, you learn. Keep the car the way it came from the factory with respect to small block and manual transmission. The only failure I have experienced with many makes and models was an input and cluster failure on an M21 when banging hard into second gear on a '68 Camaro. My 340 4 speed '68 dart is almost done and I can't wait. Love your video's

[@martind701]

In our earlier years we went to the drags to see what we could do. It was never about beating the guy next to us, it was for learning and seeing what we could do.

[@scottiaia3954]

You are obviously knowledgeable about all things Mopar, and a little ticked off at the way things turned out having driven that far. Look at the bright side, you built a transport specifically for the trip..great content by the way. You now know how the demon can perform, albeit, having twisted and broke an axle shaft you are still learning what the car can do. For never having taken a 4 speed down the quarter mile, stop kicking yourself..Nobody else out here is doing this..we are watching (and learning) from you! Great channel!

[@randalljordan8310]

Hey Jamie I love everything you are doing…. Especially all the things you’ve been doing with “Dale’s” Demon …. That is awesome!! Thank you -Randall

[@JustMoparJoe]

Oh Snap, An Axle! You chose violence that day, and the Demon yelled Uncle!

[@DeadDodgeGarage]

Haaahaha. It sure did.

[@JustMoparJoe]

@@DeadDodgeGarage the above would be an excellent band name

[@SchoolforHackers]

Oh snap an axle? Demon yelled uncle?

[@davidhutcherson9748]

Great video, glad you were able to fix the Demon ,keep the 4 speed its the way the mopar gods intened this car to be . Like all your videos, you be you we will keep watching. And remember its fathers day.

[@brucenichols540]

You can't imagine how much I envy your adventure learning to Race a 4-speed car. Such a fantastic experience.... Go get'em Jamie! .

[@petergrey7125]

As to the four-speed- like you said, “There’s an art to it,”and part of the fun is figuring that out on that car. If watching yours and uncle Tony’s videos has taught me anything, it’s to learn how to make the most out of the car you have with what you have. That four-speed car is awesome !

[@johnscelta776]

You're learning how to drive this setup. I'm learning watching you do a repair. We'll all keep on having fun. Enjoy Jamie and cool break of that axle!

[@jaimeperez7641]

I really like your willing to learn and improve in all areas, I mean doing that road trip, set up tow truck and race car and on top challenge UTG is really good content. Keep on wrenching and we would love to see that Demon on full potential against many other mopar youtubers (and of course a redemption vs UTG). Sheers.

[@blazinv85]

Thank you for your vids. Watching them takes me back to assisting my dad with his 68 383 Coronet.

[@robertlee9395]

I can't tell you much I like seeing that three pedal Demon going down the road! Keep keeping the other dead Dodges on the road Jamie! Have a great week everyone!

[@michaelmaynard5906]

I am SOOOOO with you on the three-pedal option. I would be totally into the challenge, don't care about being the fastest. being able to make all of my appendages work along with that machine would make me so happy.

[@Ray-tf2fl]

Hell yeah brother 🤘🏻 can't wait for live tonight!! I went to Cordova speedway had a blast!! Happy father's day Jamie 👍🏻💯🏁

[@vinfuria8378]

Keep at it, you'll get there, there's something magical about bangin gears through a 4-speed... it's like watching your hood shake at a red light, some people just don't get it.

[@markallen1413]

Hey Jamie, I bought a Demon absolutely identical to yours in 1982 and was probably the best Mopar I've ever owned, actually owned it twice and like a dummy got rid of it again, put about 130,000 hard miles on it, great hot rod.... oh yeah, it broke an axle too, drag raced a lot, street and strip, anyway been wanting to tell you about it. Your car is awesome and brings back a lot of great memories, thanks man and great channel, watch all the time 👍👍👍👍👍✅✅✅✅✅

[@tonyb3864]

Drag racing with an A-833 4 speed and a Hurst competition shifter is awesome. I've been doing it since 1976. You're doing fine Jamie you will get there. Thanks for the great videos as always.

[@johnserou6466]

You nailed what you need to do. Back in the 70’s I raced four speed B bodies, and you are on the right track. Congratulations and keep going!

[@DeadDodgeGarage]

Thank you!

[@davidraezer5937]

You are having fun! That’s all that matters. Also having fun in a vintage race car that sounds awesome. Yes, it’s usually the loose nut behind the wheel that needs fixing. Myself included.

[@randylear8264]

This was a great recipe for a great time. I too am a stick guy. It’s who we were in school during the late 70s. We wanted to be the best at shifting gears. And on the street it was the fastest way to earn respect. Every car I bought after my two 70s Mopars were stuck cars. 88 Conquest TSI with a 5 speed. 91 Stealth TT with a 5 speed. And a 2009 Challenger R/T with a 6 speed. But my 70 Challenger and 70 GTX are tried and true 727. But I sure wish they were 4 speeds. But all are fun cars. Have fun Jamie and be yourself.

[@SypherF]

EPIC ENDING!!! Happy it wasnt too much of a ordeal to put the beast back into action!

[@gregrhein1632]

You had me at "...I want to get good at THIS" ! As always, much respect. Thanks for the ride along! and remember Happy Fathers Day!

[@SeedlessProductions]

I've only drag raced a few times, with an ancient toyota celica 5-speed. Respect the sticking to the joy of a manual transmission.

[@brentforte5950]

All my cars are manual it's the only way to fly . Even the street racers have a manual class . Manual racing is a real life adrenaline rush . Please stay at it Jamie loving every minute of it. Wheels up..... TORQUE breaker 360

[@007fredh]

You’re living the dream brother and absolutely do it with a four speed. It’s so much harder and so much more fun.

[@stewarth8390]

Keep doing what you’re doing! Half the fun is learning and improving both yourself and the car. 13 plus years ago I had a Holden commodore SS with an LS1 and T56 6 speed and it was a real challenge to be fast and consistent to do bracket racing. These days I’ve got a 1971 Holden HQ Ute with a 350 sbc, T400 manualised and an old 9” diff. Engine hasn’t been apart since it was built 10 plus years ago but still runs mid 11’s @120mph and weighs 3640lb. I’ve been having the time of my life learning how to get the best out of it, tuning, suspension and tyre set up etc. Dales Demon is a brilliant car and what you’re doing is sensational, keep it up…. Cheers from an Aussie fan 🇦🇺🇺🇸👍

[@Mike-ie6ee]

Totally agree with you Jamie. Excellent post race analysis

[@petergrey7125]

Love the ramp truck! Looked like it did great👍 Car does sound really good .. even if it’s not moving much at the moment. 😬

[@timmcooper294]

Amen on your view on the 4 speed. Everything I have ever owned has been a manual, and will be until I can't drive anymore. I actually love really driving !! Some people will never understand...... Really driving is a physical, tactile thing, not just going along for the ride.

[@Doug2114]

Easy fix. Lesson learned. When your the one fixing the issues, you'll learn. I'm glad your keeping the 4spd. The car wouldn't be the same otherwise. On another note, the Cummins was awesome as usual!!

[@flopsiejmcardle]

100% with you on keeping it manual. Automatics take away a bunch of your connection to the drive train and a lot of the fun.

[@kmax66]

Keep at it bro You'll get to where you want to be

[@JS-Galaxie500]

Jamie, keep doin’ what you’re doin’……..great content, all the best from the U.K.

[@318willrun]

Ozark Super Shifters is a fantastic 3 pedal clutch race group

[@linwoodlane5721]

As a UK viewer i agree on sticking to the manual . In the past We didnt generally get a huge amount of autos over here . Driving a manual properly esp. on the track takes skill and learning . well done on sticking to what you want. At least you broke an " easy " bit to replace , next weakest link might be trickier .

[@cbobmonster]

Dude, don’t even sweat. The haters car ran great. Another great video.

[@raybeattie985]

Keep you doin you brother..nothin better than an angry MOPAR!

[@blackcatpgh13]

Regarding your reply to "put a 727 in it" -- you summed that up perfectly. Sometimes people want to learn to do something that involves a higher level of effort/understanding. If you can do it, there's the reward. I'm the same way with some hobbies that I'm involved with.

[@brokentoolgarage]

Glad to see you got it back together

[@paulshea2560]

👍 Enjoyed watching. Thanks for entertainment 👍

[@idaholineman5788]

4 speed drag racers are so badass!! There’s a guy here who races in Spokane who drag races a black big block 67 coronet 500 with a 4 speed. Jays my hero!

[@DeadDodgeGarage]

Nice! I hope to run into him some day!

[@idaholineman5788]

He’s an awesome guy. Races out in Yakima sometimes too. Super old school jam up dude

[@toejam503]

I raced w 4-speeds back in the 70s. Racing w 4speeds is about the challenge, nothing feels better than beating an AT car of similar power/setup, or being able to out-shift an opponent. Keep on Shifting 👍

[@bartorlans5390]

If you aren't breaking parts, you aren't trying hard enough to win. PS. Happy Father's Day Jamie.

[@jimsoutdooradventures2748]

I always enjoy your videos brother, don't let the negative comments get ya down. Do what makes you happy with the Demon!!!!

[@markszczepaniak5888]

Thankyou enjoyed this video, let's see you grow shifting gears at the drag strip so we can call you "Jamie Soxx" so you can carry on the tradition. I said it in the past love to see the day, that 340 goes back into the car, since I have a 73 Satellite with a 340 and 4:30 gears, a heavier car and thinking twice about going to a big block since it runs strong. Yes I run an automatic, 3500 stall and here's the shocker, 8 1/4 rear and have never broke an axle. But I will be inspecting them more frequently after seeing what happened to you. I think your trip was a great success for the channel. Long live the demon!

[@DeadDodgeGarage]

It’s going to happen in the foreseeable future, and you’ll see it here! Thank you.

[@SchoolforHackers]

Mark, don’t move too fast toward that big block. Take advantage of how fast that motor winds up: low gears, huge carb and the right torque converter. Damn, wish I could have the fun with you….

[@johnelliott7375]

I'm glad you are doing it the way you are good Old School learning how to get it done Jamie

[@blackielawless3712]

DaveLa here, There is so much in your head at the lights on the strip. I was messed up several launches with an auto. As far as breakage I have broken several Jeep axles, looks about the same to me, some twist and a snap.

[@btolley100]

You're killin me bro! If I was in a position to offer advice, which i am not, I would be seriously scared of your roast. Just keep it up, you'll get the hang of it. There is NO substitute, mechanical or otherwise, for experience.

[@rodneybyrd9516]

Get some 30spl. aftermarket axles and a spool!! I'm glad you are leaving it 4spd!! I want to put together my '63 Savoy with a BB wedge and a 18spl. 4spd someday!!

[@jhuntosgarage]

I'm no Mopar guy but I'm learning. That's the main reason why I keep comments to my self. Great video, my man! Fyi. I'm still here. 😂

[@KartingwasmyLife]

Kart racing suppliers will have the tire pressure gauge you need. Great analysis of the failure!

[@DeadDodgeGarage]

I’ll find one! Thanks!

[@beljames1563]

Everyone gives me grief for preferring to do my laundry on a wringer washer and line drying my clothes. Why would I spend time effort and pay a burgeoning water bill to grow my own food? It's likely cheaper to buy the stuff in a store. Why do I prefer US and State Highways...sometimes even county roads...to the Interstate Slab? 'Cause I just do.

[@JDawghasaTruck]

Love what you are doing! As I’ve never drag raced before either……we will learn together! Yes, I watched the video and observed the bog, logically too much traction. Glad you got it figured out!

[@Oldjohn52]

Figuring out how to get "the Car" down the track at it's best potential is a quite fiddly task. It's fun. You put yourself, your car, and your skills to a VERY short test that gives immediate feedback. Then you fiddle some more and try again. The object is not necessarily to go "fast" the object is to go as fast as that particular car can go with you driving. That's the fun part. With the qualifier that if you have an epic hoard of parts and the skills to fix the inevitable problems, that makes it even better. Just do it, have fun, and lets see how fast you can go. I'll watch.

[@DeadDodgeGarage]

Exactly! You get it. Haha. Thanks!

[@0004612]

Well said Old John. I hope he gets to try a quarter mile too.

[@tomfry131]

You keep doing you. I love all your videos. I am the guy who said my stepdad had a red charger like yours. Keep up all the good work

[@gasser66]

Your "disgruntled viewer commenter voice" impersonation is funtastic lol.

[@DeadDodgeGarage]

People seem to enjoy that so I keep doing it. Haha.

[@p-m2127]

@@DeadDodgeGarage ...although extremely stupid comments should mocked using a very high pitched voice.

[@scottmoore5083]

I feel like you did a great job, Jaime! 1/4 mile Drag racing is NOT as easy as it looks & you obviously have your car set up as well as it can be without dumping a fortune in racing parts into it! Keep on driving hard my friend & thanks for sharing your knowledge with us!!

[@daltonsparks1293]

That whole trip was amazing! Your 3 week ramp truck worked, you did a wheelie or a few! And most of all it was fun watching you do thanks

[@ronaldsimmons8346]

The commentor conundrum. The foolish questions come from the fans. You're a better man than I. I couldn't deal with it and would likely have to just ignore most comments to keep crazy at bay. Thanks for the vid.

[@BilgePump]

ok ok Shirley Muldowney calm down don’t make me call your Probey. We’re all with you and your already 10x ahead of where i’ll ever be. (2014 Mustang auto. Convertible- 3.7l tuner, no mufflers, 3.55 gears)

[@qmopar]

I learn something pretty much every time I watch one of your videos. I wouldn't spend too much time answering every little thing. You're a good man Charlie Brown - and way better than I am in the respect. Just an encouragement to not let the keyboard warriors get to you. You rule...period. Major respect for doing you the way your want to - I fully support it 1000% and that's why I watch!!!

[@DeadDodgeGarage]

I don’t answer every little thing. Haha. This was just a tiny selection… thanks!

[@butcher390]

So glad I watched your alignment vlog . When you left the line , during the UTG showdown , it tracked straight and , it wheelied !! The dump tubes , sounds 👌 Phenomenal !!!! Axle deletion , not so much Hey at least , that wasn't the pervebial "candy red button" 😬 I genuinely appreciate your brutal honesty

[@DeadDodgeGarage]

It definitely could have been worse. Haha. Yeah! It goes straight and does pretty cool stuff. There are some things to iron out but I’m very pleased with where things have gone so far. Thanks!

[@mikego18753]

I,ve never had a good 'air line' gauge.Thumbs up.

[@hasseandersson4631]

I really like what you're do! I Have a 73' Duster with a 360, Holley 650 dp, Mopar performance W2 heads, headers 3" exhaust x2, 727 reverse manual valve body, 8 3/4 with a snubber! and it's also blue 🙃 I'm learning to do dragracing also... My car is a "old school" California dragcar and are now in Sweden and it's "My precious" 🤩 Keep up the good work and I will follow your progress 😎

[@DeadDodgeGarage]

Outstanding! That sounds awesome. There’s at least a passing chance that our cars ran together if yours was active in ‘74-75. Which is a neat thing to think about! Thanks for watching.

[@DarrellKerinGohman]

Admitting the problem is the first step 😂Love the videos! 4 speeds are fun, keep having fun. I’ve bracket raced many times, 3speed automatic, glides with brakes. I’d be a screw up trying to race a 4 speed. Definitely a learning curve

[@TerryToon17]

Keep up the good work, I cant wait to see your next video on this project 340. To combine the cars mechanicals and your reactions and clutch/gear changes to achieve your personal goal makes it a must watch.

[@sometimesleela5947]

9:31 Usually the smooth section of a break like that indicates the start of a fatigue failure and the rough middle indicates where it finally snapoed off. Could have started with a small scratch on the axle, but if you're in the housing, check that the side gear is turning true. Also, and this is a compliment, whenever I look away from the screen, I could swear I'm listening to weird Al.

[@DeadDodgeGarage]

Haaaahaha. I think I’m pretty well known for not sounding normal. Some people like it. Some people, well… not so much.

[@raymondbryde1706]

HEY Mr problem! Great show! I'm learning so much about drag racing from your experience and it is much more complex than I ever realized. I wish you the best. Have fun and be safe.

[@DowntownPowerAndSound]

Loved the forensics! Keep up the good work. Damn the torpedoes, Full Speed Ahead!

[@knote4958]

Really channeling my energy with your comment grievances. Whatever you do, don't get on any of the purist forums. You'll see a bunch of the "You should...." comments telling you exactly how you should build YOUR car. Sure as hell makes it hard to ask around for parts or info, you get nothing but "You should build it like this" or "You should keep it stock and just drive it 'how it was meant to be driven'". Trenders and purists are the bane of any builders' progress. 27:45 by a stroke of luck I got an A body 8-3/4 with a 489. It has a 3.23 open, but hey gotta start somewhere. Glass half full, snapping axle shafts just means you're dumpin a lotta power down range

[@TonysHotRodGarage]

Glad it wasn't catastrophic. I had a gut feeling you twisted off an axle. Easy fix and back on the track! 🏁💪

[@barryrussell4106]

Jamie you are a rock star, Herb McCandles “MR. 4 Speed” was a monster in the day and he had the exact same desire to shift the thing. He got a hemi dart super stock 4 speed from dodge because no one could drive them. You are an artist in search of an art I applauded you.

[@daphlavor]

Jaimie, regarding the cam/ spring issue. Maybe worth a re visit to address the low torque issue. Cam swap is laborious but a spring replacement might help. I had a 70 GS 455, the engine came out of 73 Electra, so the RPM’s were low, I started building it to stage 1 specs, a comp cam, stage 1 springs, msd ignition, it woke up that engine big time! Good job with your explanation on your adventure!

[@DeadDodgeGarage]

It already has springs to match the cam actually. I think I could do the cam pretty quickly if I wanted to go there. I have a suitable purple shaft that would be a much better choice. But I’m going to work through some other things first.

[@nerrilsquts6603]

Your car is in amazing shape. Look forward to seeing what you do with it.

[@johnelliott7375]

You will be beyond all the head games, psych outs, and I will say that you are going to have the perfect launch soon and then you will be happy as sin. Can't wait to see you get it dialed in, coming sooner than later and I will be there to say that you did awesome and I think you have it set up correctly.😊

[@rustybrowneye]

Man, a warm tuna melt is allllright

[@Hotrod_archery]

30:21 is what its all about, the giggle worthy go fast part

[@johnharper2016]

Turned 16 in 1974. First car was 1972 Dodge Demon 340/4 speed. No ps, pb, a/c, radio. Did have heater. Paid $1,200.00 for it at a Toyota dealership. 17k miles on it. White with black interior. Made my money back first weekend I had it. Drove it all thru High School. Only lost 2 races in 3 years. Man, that car was a terror. I beat several faster cars because I could launch and shift well. Sold it for $1,200.00 with 65k miles on it. Best ride of my life. Miss it.

[@jamesp9141]

Nobody want's/or likes to make mistakes, but that's how we learn & get better. Keep on Keep 'in on. You'll get there. I'm digging it. Rock-n-Roll!!🎸

[@mphinpgh]

Jamie, I'm an older gearhead, but I know nothing about setting up a car for drag racing. I loved (LOVED!) the replies to the comments. Not so much for the STFU factor, but just for teaching me something that I didn't know. And, like you, I'm addicted to manual transmissions. I'm a little worried that my '17 GTI might be the last one I can own new (which is why I'm religious, maybe OCD, about her maintenance). Anyhoo, keep it up, buddy. Oh, and take spare axle shafts and an accurate tire pressure gauge next time. HTH.

[@DeadDodgeGarage]

Good call. Haha. Thanks!

[@chriscurry236]

Man, pay the naysayers and know it all's no attention 👍, love the Demon and I am a Ford Guy, but also a Mopar lover at heart 🤣, That's what I love about your channel, Brutal Honesty all the time 👍

[@SchoolforHackers]

Respect right back at you from a Mopar guy to a Ford guy. You have some really awesome motors.

[@jeffhutchins7048]

Good time for chromoly axle shafts!.....When you run out of replacements.😊

[@PaulSteinberg-il4tw]

Happy Fathers Day. Another great video and I'm glad you had a good time and have experienced what many of us won't.

[@loydheckenlively9426]

Do what makes you happy. Don't listen to all you. The people that respond you want to learn to drive a forest speed and race the Ford speed. Then do it. It is your car. No one else but I enjoy what you do I. Enjoy the bills you do how you talk through it and explain it. And yes, things get broke and you fix them. Don't let your subscribers get under your skin. Do what you want to do and be happy about it. I like the car. It's a beautiful car. You bought it for the reason, but what it was. It was a race car. You have a lot of history. You talked to the original owner, who had that car forever? Erased it

[@johnelliott7375]

Looking good and I hope you feel better with the manual transmission like it is a extension of the foot. Great job and great evening to you Jamie!

[@johnelliott7375]

I call it getting tuning your self in and practice is all the same, I am looking forward to seeing you there also.

[@chrisw5837]

Yes. Run the 4 speed. I’ve got a duster with a 4 speed so you’re helping me learn along the way. I did notice the super aggressive clutch dumps and your luck it was just an axle. Could have had more major damage in the rear end of the trans. Good luck in the future and 100% stick with the stick!

[@johnelliott7375]

Sounds great shape I love the sound especially when you decide to crack it down.

[@daveharvey5032]

Clearly I appreciate that you're racing 4-speeds! When we first became friends, I recognized that you, like me, appreciate the challenge of doing some things the hard way, because the reward is so much greater in the end. For me, that's analog art forms and even baking sourdough bread using fire. For you, it's racing 4-speeds and being one of theeee most DIY people I've ever met. The day you get an 8.5 out of the Demon, you're gonna lose your mind with stoke...and I can't wait to see it!

[@DeadDodgeGarage]

Yes! You get me. Haha. To this day I still feel like a cheater recording in a DAW. But my forays into solo four track production have never gone well. Some day… yes, I think with every lesson I’m getting, we get closer and closer to the mid 8s. It’s going to happen!