Рет қаралды 3,046
This video demonstrates the use of Legacy Brand Coin Ring Tools DELRIN Folding Cone Set for folding and reducing coins into rings using folding dies.
Use this tool set with ANY BRAND of coin ring reduction dies to fold coins with holes from 1/4" inch (0.25") to 3/4"" inch (0.75").
Designed for use in your ring sizing machine, but can be just as easily used in a hydraulic press or arbor press.
Included in this set:
1/4" inch hole tapered folding cone
1/2" inch hole tapered folding cone
5/8" inch hole tapered folding cone
3/4" inch hole tapered folding cone
This coin ring tool set has the same dimensions as our popular stainless steel folding cone set, but is made from detail protecting resin.
It's important to make sure that your coin ring edges are deburred and do not have any sharp edges when using these delrin folding cones.
For coins that are not 99% silver, it's important to remember that Delrin cones should not be your primary folding cone.
Ringers should use a steel cone for the majority of the fold and then transition to the delrin cone for the last little bit where you would get the most metal to metal contact.
And remember to always anneal your coins during the folding process.
Free Shipping available on the Legacy LLC Site, no minimum purchase required
coinringtoolsllc.com/product/...
Also available on Etsy for International customers
www.etsy.com/listing/67474410...
Thank you for watching, and Happy Ringing