Coin Ring Wall Straightening Set

In this video Gary demonstrates the process of straightening the walls of a coin ring.
Straighten the walls of your Swedish Wrap coin rings with this 13 piece straightening set by Legacy Brand coin ring tools. Use for rings from size 3 all the way up to size 15.
With 6 caps and 6 cones, this set has a total of 6 different incremental steps to use when straightening the walls of your coin ring. Also, includes a stand to hold the cap.
The set is designed to be used right after using the Swedish wrap method to straighten a ring. It can be used with other degree folds (17 degree for example), however the cut side of the ring must first be opened up using a standard ring stretcher.
Made from detail protecting delrin, and set at a 5 degree angle.
Always anneal your coin ring frequently during the straightening process.
Always deburr the cut side of your ring before beginning the straightening process.
Always use coconut oil to lubricate your delrin cone before beginning the straightening process.
Credit for the original design of this system and the modification and improvement of this wall straightening system for coin rings goes to Neil Pipet and Gary Rosa. Royalty agreement in place.
Free Shipping available on the Legacy LLC Site, no minimum purchase required
coinringtoolsllc.com/product/...
Also available on Etsy for International customers
www.etsy.com/listing/80565609...
Thank you for watching, and happy ringing

[@scotfoster6848]

The man knows his shit. This is 3rd. Video I have watched from him. Good stuff. Thanks

[@legacybrandcoinringtools2956]

Thank you Scot. Happy you are enjoying the videos... Gary

[@wayneweisphal2348]

Thanks, Gary. Great video instruction!!

[@legacybrandcoinringtools2956]

Wayne, You are very welcome. Great to hear feedback from the videos. Enjoy, and happy ringing... Gary

[@rawdata7569]

Good training video......thank you

[@legacybrandcoinringtools2956]

thanks for watching!

[@davidcambridge1991]

Interesting well done 👍

[@legacybrandcoinringtools2956]

David, Thank you very much.. Gary

[@neilpipet3462]

Nice job two times...

[@legacybrandcoinringtools2956]

Thank you Neil.. Appreciate that

[@yourvapingdollar]

Beginners question, Do you do the final sizing after the cones?

[@legacybrandcoinringtools2956]

Bill, Yes you would do final sizing after the cones. Many times after straightening walls, I would stretch up, and do a slight reduction to form a more natural looking ring with a slight curve. Really depends on the looking feel you are going for as well as size.

[@timothyjohnson7521]

Where can you get a set of those amazon?

[@legacybrandcoinringtools2956]

Here is a link where you can order a set for yourself coinringtoolsllc.com/product/legacy-brand-coin-ring-wall-straightening-set/

[@roberth8381]

Hi Karen Is there no chance to get this set delivered to germany? Thx Robert

[@larryharnarjr9582]

yes, go to website: coinringtoolsllc.com/international-customers/. Send full shipping address and I will get back to you quick with a quote for shipping to Germany.

[@EssexSilvering]

Good video, very educational .... One thing to ask you, ... Coconut Oil ... Any one you would reccommed? .. Thanks.

[@terryswails1191]

Will these straighten a wobbly ring it it's not real bad??

[@legacybrandcoinringtools2956]

Terry, Yes these sure can help to straighten a wobbly ring indeed. By resting the reed on the lid of the straightening set, and pressing through with a cone, not only does it help to straighten the inside but a wavy reed as well. Many find that sizing up using this system prevents the wavy while maintaining symmetrical ring.

[@terryswails1191]

@@legacybrandcoinringtools2956 Awesome, thank you for taking your time to answer my question, I'm almost 70 and just getting started into coin ring making. . Have a great day

[@legacybrandcoinringtools2956]

@@terryswails1191 you need help, give me a call 870-421-3029

[@terryswails1191]

@@legacybrandcoinringtools2956 Thank you kind sir, what an awesome thing for you to do, to give me your phone number, I appreciate it.

[@jorgeaservin]

does this set works in conjunction with 5 degree swedish wrap dies?

[@legacybrandcoinringtools2956]

Yes this set will work in conjunction with 5 degree Swedish wrap dies.

[@b3kki363]

What type of press are you using?

[@legacybrandcoinringtools2956]

That is a 1 ton arbor press from Harbor Freight

[@benranfeld7871]

Are these recommended for 1oz copper rounds? Those seem to chew up delrin/nylon tools for me.

[@legacybrandcoinringtools2956]

They will work with 1oz copper rounds to straighten walls if properly annealed, after a Swedish wrap fold.

[@globalmagicnation8464]

Can’t you just use that ring stretching tool you have on the left in the background to do the same thing?

[@legacybrandcoinringtools2956]

Good question. The ring stretcher in the background stretches and reduces, however will not stabilize the reed while stretching/straightening.

[@jonwaters5278]

Would these work instead of the Swedish wrap method.

[@legacybrandcoinringtools2956]

These are used to open a ring once reduced down to create a straight wall. Not a Swedish wrap method replacement. I sent you an email

[@kathyzamecki6647]

L

[@pauldejesus9644]

what size press are you using

[@legacybrandcoinringtools2956]

The red one in the video is a 10 ton

[@pauldejesus9644]

@@legacybrandcoinringtools2956 can you use a 1ton

[@legacybrandcoinringtools2956]

@@pauldejesus9644 Yes you can use a 1 ton press for wall straightening.