"If An Electrician Did This He Doesn't Give A ****"| Electrical Fault Finding| Electrician In London

In this video I carry out fault finding for an earth continuity issue on a ring circuit I discovered last time I was at the property.
Last time I was at the property putting in some power points for the kitchen and I discovered the issue. To resolve the issue I decide the best course of action is to check for loose connections or to split the ring into two radials on 16 Amp MCBs.
Once the earth continuity issue is resolved the customer asks me to take a look at two lights that aren't working in the kitchen. As the connections are above the ceiling, the customer has to remove the carpet and uplift the floorboards to grant access. When he does this it revealed that the the cables are floating in the void of the floor without a junction box.
This video is made in association with Ads + Brand. Facebook Ads Agency for small business:
Contact Ads + Brand for a consultation: www.adsandbran...
Please also follow me on Instagram:
/ delroythespark

[@jackk355]

I know nothing about electrical work, but it is interesting watching you work, seeing your approach to problem solving! Huge respect to your trade.

[@Cablesmith]

He definitely did that himself 😂 love how you burst out laughing at it 😂😂

[@eastwayelectrical]

I'll guess we'll never know

[@billyt9921]

@@eastwayelectrical he'll know 🤣

[@JayTheSparky]

💯%🤣🤦🏻‍♂️When Delroy started laughing it killed me! Had a job like this where the client wired their own loft conversion...went to a 2 gang switch and you had to have one switch on to make the “New” loft landing light on...he admitted he had done it himself in the end and said he couldn’t get it back to how it should be and he’d lived with it ever since but was now selling 🤣....the pendants were all three plated too

[@glenecollins]

I used to live in a house owned by an electrician (who worked at a nearby power station) it had the original cotton insulated wires in it, some asbestos insulated wires and the new power points were all wired in around the new RCD with way too much wire in between. Australian wiring tends to be simpler than UK or US wiring but we had so much wire l couldn’t get radio in some areas

[@jp2002parry]

So has he got you back.?...

[@deadstar962]

I highly respect people with the patience to troubleshoot

[@joeds3775]

An electrician did it..... Yet he, the customer of the sparks, knows the routing of ALL the circuits.....

[@The_Gallowglass]

Maybe he watched the hack do it before.

[@timderks5960]

You wanna say you don't know what your electrician is going to put in? You don't discuss beforehand how they're gonna route stuff and what's going to happen? Not everybody has such an "I don't care" attitude... Also, some people try and fix it themselves before calling an expert, and figure stuff like routing out as part of the debugging process.

[@ronaldwoofer5024]

@@timderks5960 if its not booze, tits, ass or money nobody cares lmao. they just want the problem fixed they could care less how.

[@harrison78]

I've always made sure I know exactly where and what everything is any trade is doing in my house. That way I instantly know what is happening if there is a later issue.

[@ThatGuyNikolas]

@@timderks5960 I'm gonna tell you right now that 9.9 times out of 10 they do not give a shit about how you're gonna do it. Most of the time, all that is discussed is what they want done and where they want it done. Depending on the job or what they want done, I'll tell them what they're options are if I see there's a better way of going about it, or if there's some issue with doing it how the customer wants it. But beyond what they're gonna be using or staring at, they care about as much your average Customer cares about what a car mechanic needs to do beyond "Can you fix it?". If somebody happens to be curious and does want to know, then I'm happy to explain it to them. But it's rarely the case.

[@Dan-fz5nn]

US sparky here, dude I've never seen pendant cables coming straight through drywall before, it looks ridiculous LOL

[@supremeicecreme1658]

Yeah, those sorts of lights are ones where you have a central rose and those pendants all connect into that, then you install hooks to tie the cables off to so they hang from there. It's a part of the industrial look they're supposed to have.

[@tipi5586]

@@supremeicecreme1658 Definitely doesn't mean there shouldn't be some fitting to connect it to the ceiling. It looks less industrial and more like a machete showroom in a home store that isn't actually a building, so it doesn't matter if the lights are attached without fittings.

[@FourthMan82]

Not been in this business for long then? I've seen shit like this far too many times.

[@Dan-fz5nn]

@@FourthMan82 12 years, seen a lot of brackets and canopies just screwed to drywall with no box. But this doesn't even have a canopy. It's the worst final product install I've ever seen.

[@Dan-fz5nn]

@@supremeicecreme1658 No, it's flat out against electrical code, no inspector would ever pass such a hacked our job. The electrician in the video notices it immediately as well.

[@TristanBuckley]

As a DIYer I would never do that to my own house or anyone else's. That was defo the client's own work as seemed to know where everything was!

[@buildahousewithlaserwoodcu3208]

Haha

[@eastwayelectrical]

I guess we'll never know

[@bobhook336]

I know it was bad but it hadn’t caught fire. I’ve seen “real” electricians work in commercial buildings that would make you cry.

[@mistsmogguru8378]

There are animals out there in all trades. They don't care should someone be hurt or worse. Professionals like you restore faith in humanity

[@mickpospiech1363]

When you were touches them wires and the phone rang, I nearly jumped off my sofa. lol

[@greatbambino2993]

😂 me too

[@simiiee]

Apprentice here from ireland your helpin me understand alot. Your a gent del big respect

[@eastwayelectrical]

All the best sir

[@jonobrow]

Lots of people commenting on the lights hanging out of the ceiling but I'm just as appalled by the quality of the plastering.

[@1992jamo]

If you look closely, it's where he's drilled in the wrong places and had to repair it hahaha. I watched this video ages ago, and I didn't notice that until now.

[@l337pwnage]

I didn't look at how they were mounted, which is, they aren't mounted, lol. One time I did live in a place, tho, that had a hanging dining room table light. It was mounted, had a center piece, and a fixture at the end, tho. The center piece had a spring loaded cord winder in it and you could pull it down closer to the table, or lift it and it would wind in the cord to raise it.

[@wolfrobots118]

I love the way you talk....you're so nice to your customers.

[@Secrytt]

what a huge difference it makes when a tradesman knows what he's doing and actually cares about what he's doing

[@Harold_Shand]

Bet Damien was straight on it as soon as you walked out the door, now he had a lot more electrical knowledge to work with. The pendants looked awful.

[@jimbojones8208]

Absolutely disgusting.

[@trevor5500]

You are truly the electrician from heaven, fantastic work and patience as always.

[@johnbeer4963]

wow. I'm not happy with the wiring in my house but this installation makes me feel MUCH better about it.

[@vChilly]

Don’t know how this was on my recommended but this was pretty interesting to watch

[@S3dINS]

Thank god for people who understand electrics. It’s one thing I have never been able to get my head around.

[@mattc6599]

It’s great to see there are sparks out there that care!! Love that you laugh at the work and ask if he did it him self lol

[@Mikej1592]

LOL I'm two things, one not British, and two, not an electrician, and even I know that is one dodgy setup and not the right way to do it. Thanks to Thomas Nagy showin me a lot more about British wiring than I ever thought I wanted to know, and now I found your channel and I just can't get enough of this stuff.

[@leedobbs2435]

Them lights where hilarious how did you not just laugh your head off 😂

[@eastwayelectrical]

😂

[@crysis4real]

The worst lighting arrangements I seen in a home; looks really nasty ! Well done in finding all these major serious issues !

[@andpeoplesayineedalife6418]

Bet you thought there was nothing wrong with them connector blocks with them pigtails you use though 😂

[@PiezPiedPy]

I wonder how many times the owner has burnt his head on those bulbs while doing the dishes lol

[@Papi4l2]

Im just a homeowner in the states who likes to DIY so i watch videos to learn...BUT! I doubt it would be easy to find an electrician to deal with the mess this guy has here. Ur patience is awesome...maybe not just u, but ur countries patience lol

[@markharrisllb]

I think the house owner is someone like myself. I worked as a chef and then did a law degree and have worked in welfare. I knew naff all about the standard trades such as electrician, it’s only since I’ve been forced into semi retirement through ill health that I’ve started learning bits of things. Even so I wouldn’t do anything more exciting than wiring a table lamp. I think Damian had a cowboy in and saw where things were put rather than do it himself. People like Damian and myself though good at what we do for a living are prime pickings for a fly guy. How many retired teachers etc fall for the: "I was just passing and saw a loose slate" con? The lights didn’t look good at all, personally I don’t like the idea but it also looks only half executed. First video I've seen of yours, it’s nice to see a decent guy who just wants to do the job right and safe. Subscribed.

[@eastwayelectrical]

Thanks for the kind words.

[@adamsharp201]

Erm. You need to check yourself. Law degree to working in welfare?? Becoming a qualified electrician is a huge achievement. You are good at nothing.

[@richardclarke376]

Who the heck has wires hanging out of the ceiling like that!!!

[@pauldriscoll6319]

it looked a bloody mess and it was a bloody mess lol

[@Михаиллеви]

It looked like some form of abstract artwork. Some wall unit doors looked like they hit them

[@ziggystardog]

I’m shocked, shocked to find that unauthorized wiring is going on here. Your wiring diagram, sir…. Oh, Thank you very much.

[@Sidicas]

23:46 That's an original Pollock artwork masterpiece worth over a million dollars! You never know what you'll find under your floor boards!

[@ianforeman4377]

What I get from a lot of your videos is just how hard fault finding is and how so many people miss things

[@seniorcomputer3292]

My gosh. What a hell hole. No junction box. Complete rewire after lifting the floorboard. Thank you. Informative video.

[@liquidsnake6879]

Definitely did that himself, also asked about the gloves you were wearing which indicates he's curious which is a common trait in DIYers, nothing wrong with it so long as they do their homework and get someone to double check their work whenever they're not 100% sure of something, but i'd hope there would be more opportunities for them to learn in a safe environment if they want to and are curious

[@sj8099]

Many people think it's safe because they don't hear a bang. Always tell people just because it works doesn't mean its safe.

[@xavi239]

I am going to spend a lest an hour a day on your video as I haven’t had the chance to get an apprenticeship because of COVID

[@mfx1]

One thing I would do particularly if working along with other people in the house is fit temporary touch proof test points to exposed cables you're about to live up for testing, you can easily fit them with Wagos and prevents embarrassing accidents.

[@drpantastic1969]

Agreed connector blocks are a must to give basic protection for yourself and others you gotta stay safe Del

[@georgecroney6168]

If you're ever short on time and effort and you need to fit 5 lights, drill 20 holes and polyfilla the ones you don't end up using

[@MrJR86]

I’m so glad I work as an electrician in Norway and don’t have to deal with your ring circuit! Seems like a pain in the arse finding faults when you don’t know how it’s laid.

[@AwoudeX]

Dutch electrician here, English people are stubborn: imperial system, driving on the left side and their shoddy ways with electricity xD

[@syncrosimon]

@@AwoudeX we invented it, we will stick with it😂

[@syncrosimon]

It’s always the bad quality addition to the wiring that makes it complicated!

[@AwoudeX]

@@syncrosimon well, maybe you should check wiring related fires in the Netherlands compared to that of the UK, normalize it for the size of the population and then think again what you're saying :D

[@joparish1037]

He definitely did this! The way he says ‘into a junction box’, knowing full well there isn’t one! 😂

[@rubybrady7051]

Very polite man. Good at his job

[@darkdepth1991]

Hi Delroy, thank you for sharing some of your fieldwork again. Can't wait to see your next video's.

[@eastwayelectrical]

Hi sir. You're welcome

[@darkdepth1991]

@@eastwayelectrical I personally like the way you publish your content. Showing the real effort it takes to finish a call-out. Do the talking with the clients. And never leave the call-out without plan or result. Myself service technician in a multinational company has to do this talking multiple times a day.

[@mancave7879]

Absolutely RIGHT ! 'Do it properly', a 'Must' for all electricians, for the sake of all people !

[@davidpatterson1574]

Excellent job Delroy; you are doing a good job.

[@eastwayelectrical]

Thanks David

[@jamesmchugo9422]

Omg! I just renovated a house with much of the same insane wiring issues! By the time I was finished correcting the wiring issues I really was wondering why the house hadn’t burnt to the ground.

[@HistoryInHighDefinition]

I'm absolutely addicted to this channel. Really informative and entertaining!

[@rouman7]

Complete bodge , all surface sockets to. Defo a handy man at work there.

[@ImranKhan-cf8gs]

Cow boy job he did it himself he’s blagging

[@Cant_be_arsed]

I think Damion definitely did this himself 😂😂

[@eastwayelectrical]

Thanks for sharing your thoughts

[@tresslerj1985]

First beer in a month and enjoying it while watching. Good stull Del!

[@bencrawford1376]

I keep trying the same but lacking the will power!

[@eastwayelectrical]

Enjoy!

[@VaeVictisXIII]

Such a top bloke, all about that honest graft

[@markfire1235]

Delroy I love your KZbin videos I’m an electrician and run my own business in Kingston Surrey I’m really busy at the moment but when you do good things good things happen anyway good luck best wishes Regards Mark

[@eastwayelectrical]

Thanks Mark

[@johnschlesinger2009]

I admire your patience! What a nightmare installation.

[@ianjeffery3762]

I'm not an electrician but I can tell he did those lights himself! Funny how he knew exactly where the cables were....

[@stephenllewekyn706]

let me just go and get the exact floorboard up you need del

[@zXLuke4efcXz]

In his defence if I had an tradesman round I'm pretty sure I'd be able to remember which space and carpet we had to lift up to access the floorboards too...

[@shaunlewis286]

@@zXLuke4efcXz if you had a tradesman in who just dropped those cables through the ceiling like that I'm sure you'd remember that too LOL

[@zXLuke4efcXz]

@@shaunlewis286 isn't that what I said lol

[@bobhook336]

I know where all my cables are. I took photos as it was rewired so I didn’t ever drill into them. Same with plumbing

[@mrechbreger]

In Taiwan this would look like an installation of an electrician with 10 years experience!

[@Papi4l2]

...seriously? Lol

[@HowDidThisHappenNow]

sad and true, turn off you electrician brain when your there... wire-spaghetti is but the first shock for you otherwise

[@mrechbreger]

@@HowDidThisHappenNow The land of the noodles. By the way I like Taiwan haha.

[@TheBanana93]

Now India is where the really crazy shit is at

[@brianoceallaigh8714]

A lot of hoof and spur marks around that job done on those light connections... gr8 video Del...

[@eastwayelectrical]

Thanks Brian

[@dwarfsbaneironfist2527]

I used the same electrician for about 10 years with no problems. I could not get hold of him to replace a Vent Axia fan. After about a month I hired another electrician. He told me that all the wiring was sloppily done and asked if I had done it myself, I had all the documents that the electricians give you, so I was able to show him proof an electrician had done the work. I had him check the otherthree fans, shower, kitchen etc, I went up into the loft to have a look. He was right, everything looked like a blind monkey had done it. We do tend to trust tradesmen.

[@stephenknowles8580]

Great vid del. I bet, just as you thought it couldn’t get any worse with the non existent ceiling roses and both rings on the same breaker. He saved the worst for last with that mess under the floorboards🤨

[@eastwayelectrical]

Thanks for the kind words

[@arniewheeler4673]

3:30, noted, you checked the earth tightness in that socket but you didn't look to see if the earth sleeve had prevented a good copper connection. just a thought...

[@BoxwatchTv]

He does that without thinking its not worth noting every little action on a job in these vids but you wouldn't know that as you don't make KZbin vids to edit #CleverClogs

[@BrettVanWey1]

It’s good you pushed and made sure this is fixed properly.

[@ConstantlyDamaged]

Oh, that lockout on the Earth Leakage switches. From what I heard, that was to stop idiots from using tape or wire to hold them in the on position. Even if held it on, and you pressed the test (or have a fault), it would still trip it and cut power (similar to how high-current commercial breakers work). This is why we can't have nice things.

[@Mistermoobs]

Ahh the customer has done so much himself.

[@social3ngin33rin]

Figuring out those circuits would drive me nuts lolol

[@eastwayelectrical]

😂

[@dilligaf2386]

Looks like a job I employed an electrition to do and had the nerve to moan about the council asking him to do a course 17th edition and moaned, I've been an electrition for 40 years. I ended up redoing it myself, looks the nuts now. It's not about how long you've been tradesmen for its do you care enough to do the job right.

[@rjc0234]

This is what always blows my mind about construction in the UK. How hard would it be to provide a wiring diagram!?! and why are our electrical boxes so small!!!! nightmare!

[@mikejose8966]

I know you folks have ring mains which typically means fewer breakers, but I’ve never understood why the load center enclosures are so very small! If it’s a tight space, I could sympathize, but I’ve seen these mounted on walls that have plenty of extra space and they are always the same small size.

[@edc1569]

A wire just hanging through the plaster of the ceiling looks appalling, how are you meant to service anything or even decorate. The notching and drilling of those joists is pretty scary too.

[@eastwayelectrical]

Defo unconventional

[@JayTheSparky]

I’ve seen this once beige where a maintenance man had changed some pendants...he had put the pendant up in the floor and then stuck the ceiling rose straight over it connections weren’t accessible 🤦🏻‍♂️🤣

[@jak50cent]

@@eastwayelectrical how does that plug tester works? Is it just testing for power or is it a circuit tracer

[@anttimaki8188]

@@jak50cent it tests the power, but it also shows you that socket is wired correct, which is more important.

[@jak50cent]

@@anttimaki8188 oh ok I have something similar it’s not audible like his that’s why I asked. My plug tester has a reset button to text GFCI receptacle. I love service work, generator, and EV charger jobs

[@GMRMDE]

Good vids, always good to see a good sparky get around, keep the videos up.

[@eastwayelectrical]

thanks Aus

[@alansalter1836]

I certainly respect all trades he was never electrician who did this ! You never what trouble these people leave behind All the best mate

[@dallassukerkin6878]

Oddly fascinating to watch someone at work who knows what they are doing. One of these days we will get a register of tradesman that actually means something and we can finally be rid of the Cowboy Builder problem.

[@lionheart6960]

Well said Delroy there are some serious Cowboys 🤠 out there

[@eastwayelectrical]

Thank for the comment, hope you enjoyed the video

[@willster947]

Great video, had a similar thing going on in the new house I bought. I removed all of the extra surface sockets and everything worked properly. Lights are still an issue but at least they work.

[@The_Studioworkshop]

That’s horrid. He obviously had a go himself. Fair play, sometimes it’s hard working with thick cable and those connection blocks but that’s no way how you do a junction box. Awful awful!

[@eastwayelectrical]

Junction box definitely needed

[@R.H.Electrical]

We all know he did those lights himself lol He knew which floorboard exactly for the terminal connection blocks and you could hear it in his voice when you said.... you did this didn't you 🤣🤣

[@marksandsmith6778]

Very instructive Delroy . Thanks from USA.

[@leeroy361]

LMAO - those lights in the kitchen. When he said it didn’t look nice. It looks shit. This mans a DIYer for sure.

[@JIBS.]

Best electrical KZbinr is Delroy by far.

[@eastwayelectrical]

Very kind of you

[@GoCoyote]

US electrician here. Is it legal to have hidden junctions in the UK? Here in the US, all wires must be junctioned in a device box that is accessible, and cannot be done in a floor space between floors unless the box is accessible, usually from a light fixture box or ceiling junction box, and less commonly in a floor box. Buried boxes and junctions are some of the most time consuming faults to find. That is a fire waiting to happen.

[@IncognitoX8]

I bet it's not, danish electrician here, and it's a big no no. No electrician in his own mind, would ever do this.

[@senhalp5724]

im an Apprentice electrician and i must say i have seen some stuff where we had to remove and replace everything because how bad it was. like wires burned to literaly ashes

[@ianmcgonigle7225]

For recording RCD trip times is it not x1 faukt protection x 5 additional protection?

[@greatbambino2993]

Interesting to see electrical outside the US. What a mess for this house, but awesome walkthrough!

[@eastwayelectrical]

Glad you find the content interesting

[@seandempsey9396]

Wtf how do these people get away with it?. That was not installed by a qualified electrician no way, Well done Delroy it's a good job there's proper sparks out there to put things right. Like you mate. Fantastic video

[@eastwayelectrical]

Thanks for the kind words

[@chrispartosbro4555]

24:02 All you have to say is what if a kid knocked over a bottle of pop and it went straight down there between the boards, or this pipe here burst?

[@benfraser8728]

I am in SA. our regulations here require every earth termination with 2 or more earths need to be crimped to gather then terminated in box/switch/plug. If you lose a live, or neutral, your equipment will not work. Then requiring back checking to locate a fault. Loosing an earth, never, with great consequences can cause electric shock.

[@eicrcomplianceltd7590]

You always gets the best jobs mate, how you so lucky? get the builders back to correct it 🙃😁

[@eastwayelectrical]

😂

[@gorillaau]

The best jobs makes for the best videos. Seriously, dodgy builders will come back and do another dodgy and then bugger off again. Wash and repeat

[@michaelbrown984]

Very interesting to see how you problem solve step by step.and talk it through..

[@6string327]

I just wired my house in Ontario Canada, as a home owner you can do your own work and get it inspected by ESA. It's pretty extreme in terms of requirements and learning. All circuits must be AFCI protected from the breaker panel, which means AFCI breakers, which run around $100 each. I used 15 of them lol. AFCI = arc fault circuit interrupter.

[@jontownsend8090]

Wtf, deffo a DIY installation. I love the position of the smoke alarm, maybe next time, put it in the consumer unit.

[@AnimosityGamers]

journeyman electrician from Canada here thats considering a move to the UK and I got to say for some stuff UK is way above us for safety like Meggering all the lines and having fuses on alot of equipment but then you got other stuff like putting fixture wire through a ceiling to join in somewhere else that isnt really accessible. Its kind of mind boggling to me. I do however love how you sparks get to really take your time to diagnose and wire because here in houses (commercial builds is a bit different) its get in and get out as quick as humanly possible and many companies will try to get away with shoddy work to be the lowest bidder and there are SO many of us sparks so its difficult to keep busy. Still considering a move over to the UK midlands where I have family but dont know if any of my years of experience would even be considered.

[@jurassicsparks5220]

The cable going into the ceiling void is not the norm. It’s actually damn right stupid.

[@AnimosityGamers]

@@jurassicsparks5220 I suspected so. Ive seen some other videos form Delroy along with others showing some other stuff that I found strange but probably not the norm like; Steel enclosures outside, Twin & earth outside, Panels at any height (from right at the floor to right at the ceiling), burying a junction box in ceiling or floor and spurring/extending a plug from a kitchen circuit. Are any of these allowable practices or just people leaving the work they find there? Is that ok, to just leave the work and make a note about it? Like if I open a permit on a house here my work is inspected by a city inspector and they can inspect the entire house for code violations that they can then tell the homeowner they need fixed. Come to think of it, I dont think i've ever heard of a inspector in the UK like we have here.

[@eastwayelectrical]

Thanks for sharing your perspective

[@AnimosityGamers]

@@eastwayelectrical thanks for sharing your videos. Always a pleasure to learn how the sparkies operate across the pond

[@yensabi]

You seem to find these dodgy jobs here and there and it’s usually the homeowners handy work but they will never admit to it....😃 Nice one Del and keep up the good work mate...👍

[@eastwayelectrical]

Thank you sir

[@mrhlp470]

my old man would of given me a slap for that if i had done it as an apprentice well done delroy

[@Mortarion6666]

The smoke detector in the way of the screws in the fuse box 😂😂 the irony is killing me 😂😂

[@mrpete1972]

Great vid, so glad to see your work and explanation. Hope Damien pays you well for sorting someone elses mess.

[@eastwayelectrical]

Thanks for the kind words

[@superseven220]

Let alone the rats nest of wiring, those flexes for the lights just hanging out of the ceiling look absolute shite! No strain relief at all!

[@ianwood4910]

Love the hanging lamps ... so frigging nuts

[@gorillaau]

Where's the light base? I'd love to punch a hole in the ceiling to see what is in the ceiling cavity. Endosope would do it.

[@funkylee2010]

Quality diy workmanship 🤦‍♂️ 15 mins in ya video my mind was made up rewire 👍🏻

[@sonnikdoh2510]

You wanted heated floors right? Good, cause this should catch fire at some point.

[@JesusPwnsYa1]

2:20 the wires don't form a ring, but your phone does.

[@cuebj]

Looks like a council direct labour job from 1970 with subsequent bodges by similar cowboys. Only things missing are all the 1930s and 1950s fittings and cable offcuts left under the floorboards. Almost exactly same as the filthy chaotic mess we found in my daughter's new maisonette. Took a week to sort it out and make it safe

[@peterw4338]

My parents had a new house built. I inspected the caballing and it was worse than you have shown. Although the building inspectors passed it a safe, they never actually checked it because it was wired by a well known reputable builder.

[@adamsharp201]

R u an approved electrician??

[@peterw4338]

@@adamsharp201 I was at the time (1988)

[@dave8168]

Looks like a fire looking for a place to happen. Can't help but wonder if there are any more "junctions" like that in that house.

[@riklowe]

What a mess. Sockets on the lighting circuit and DIY joints under every floorboard ! I think you did the right thing - it’s needs fixing properly- but I suspect he won’t ask you back !

[@TheJohnscot]

This guy knows his stuff!!

[@eastwayelectrical]

Thank you sir!

[@tazz1669]

I'm no spark, although during my apprenticeship back in the day you did a but of electrical work, but there is no way I would do that in my house It's was a disaster waiting to happen glad you switched that to a radial but that took some figuring out, no idea why is not a ring some well dodgy wiring there. If I'm getting anything done in my house I like to keep an eye on what's going on, might not know everything but at least you get an idea if the guy doing the work is a cowboy or not.

[@JohnstonPettigrew]

Did you sort out his ring for continuity yet?

[@Михаиллеви]

You got the patience for this madness 🤣

[@jansmit9009]

The overal quality of the works done in his house is very poor, so I bet he searched for the cheapest or he did the most things himself.

[@Ash_Lawless]

European panels seem so tiny for working in. im Canadian and the panels we use are WAY bigger.

[@soisaidtogod4248]

They are 240V everything there.

[@Ash_Lawless]

@@soisaidtogod4248 i know that. That has literally nothing to do with my comment.

[@peterfitzpatrick7032]

@@Ash_Lawless lighten up Francis.. 🙄😒

[@MsSpermator]

I live in europe and my panel box is 1.7m by 1.7m. I wouldn't call it small by any standard...

[@Ash_Lawless]

@@MsSpermator sounds a lot bigger than the 1s ive seen i videos. The 1s ive seen are all like 500mm by 500mm-1M.