REPLACE OR REPAIR? | Hole in Quarter Panel!

[@Daniel-z2j2v]

For anyone reading this guy did the QP on my Lexus and did an amazing job my wife was very happy with the work. Thanks Ken.

[@DentDiscountPDRBodyShop]

Right on thank you for your comment

[@xray364]

Wish we had someone with these skills in Melbourne Australia

[@mattandshelleymccool4753]

Easiest decision I'll make today - Subscribed. This is the 4th or 5th video I've watched in a row. Another example of a master of his craft sharing knowledge on KZbin. Thanks! I have various dents in my vehicles that I've lived with for years, stuff like this gives me the motivation to try it myself. Worst case, my '98 pickup still has a dent.

[@hobbyelectronics6630]

I don't do PDR, but I used to do a lot of rust repair. Back in my day, that panel would have been beaten out, filled and painted for under $1000. I can't do what you do, but I could still do an acceptable repair with a hammer dolly and puller for a lot less than a panel replacement. I have pieces of chain embedded in the floor of my shop. I would weld tabs to the dent then attach a clamp and pull with a come along, pull back ram or a floor jack anchored to my floor chains. It was simple and cheap to do and yes it was back in the 90s. That said show me your magic.

[@craftysage1835]

First time to your channel. This video popped up in my suggestions and I clicked to watch. Once I did I was hooked on your content so I had to sub. I'm retired now due to medical reasons but back in the day I did a ton off collision repair. I gotta say "You're an Artist". The way you finesse the metal back into shape. A lot of folks can't read the dent and that's key to fixing it. Love the content on your channel.

[@138galaxia]

Thanks for the videos, i'm a body-tech for 35 years and i have learn a lot from your videos.

[@DentDiscountPDRBodyShop]

Right on I’m glad your getting some good insight on my channel

[@victorr.leclerecreyes7869]

Congratulations one more time not only for this video tutorial. Also for the great seminar with other great masters. I saw part of the video of the repair. Simply glass.😅😅😅😅😅😅😅

[@DentDiscountPDRBodyShop]

Thank you my friend I appreciate that

[@Simon-hf3lw]

No I will just follow your instructions to the letter because I am listening to the voice of experience one step at a time his second to none , he's the man of steel not even kryptonite will stop him 👍 😎

[@paulparoma]

Very convincing hammer sound effects added in post-production.;)

[@Seanshams310617]

Beautiful 👏👏👏👏 I have tremendous respect for your artistic ability

[@christophermisiano5769]

You are a true master at your craft sir.

[@cusomano76]

Just when I say there's no way... Ken proves me wrong. Beautiful work and another outstanding repair!!

[@DentDiscountPDRBodyShop]

Wow, thanks! I appreciate that

[@dbnarizona]

Great video! I had a similar dent just above the rear bumper. I tried PDR but it failed, however I was using Amazon home style pdr equipment and it resulted in more damage than fixing anything. Finally I paid a body shop to do it right and it did come out perfect! I guess that is why they get the big bucks.

[@drummer_zay9493]

Yup. While this kind of work can be done by a professional, with years of experience. Tackling it by yourself without that experience can make things go wrong very quickly. There’s a reason you pay others to do things you don’t know how to do 🤷🏻‍♂️

[@paulparoma]

They practice a lot on old metal panels before they start working on real cars. That's why they can do a better job than you and me.

[@robertreavley7145]

Yet again my friend you have taken a job that looks impossible, and with what look like ease” you fix it perfectly! You NEVER fail to impress me man “O” steel as a body n paint man I’d love to be educated by yourself to get something near your abilities! But I’m over in England 🏴󠁧󠁢󠁥󠁮󠁧󠁿 But watching you is a blast! ❤ the channel

[@DachsAutos]

Another amazing job. If you were closer I'd have you repair the door on my X5, but it's a drive from MN. -- I just need to get motivated to strip my door inside to get it done!

[@vico_s-7899]

No need to repaint, just Touch Up n polished sir..👍👍👌

[@WildWestGarage]

I’ve been watching for a while, just subbed, I’m very inspired.

[@hilljack5764]

I learn alot watching you man

[@the-real-rg]

Im amazed every time i look at one of your videos. What do I need to do to get started learning this skill? Point me in the right direction. Any kits you recomment getting for a totally new beginner?

[@ecobar87]

Pulling tower does all the work. Where did u get yours?

[@edmundoalvarezvaldez]

Great job Master !!

[@smokegonzales2605]

Once again a great video.But I do have a question You didn’t put heat on it this time why not? And I had the experience that you have it would be PDR

[@BigX698]

Hi Ken, amazing work! How much does your training cost and how long is the beginner course. Thanks.

[@aaronhartzell9769]

Great work as always!

[@johnnorth5957]

Amazing work

[@DentDiscountPDRBodyShop]

Thank you! Cheers!

[@j0cr0z]

crazy videos my dude, i’m a newly subscriber.. love the content. do you happen to have an pillar videos. looking to get a dent on the driver side pillar out. but don’t see you posted any videos on that. I wish I lived in Cali so i can have you do it. oh well. thanks for the content! you are awesome!

[@oneforreal]

I love your work brother.

[@DentDiscountPDRBodyShop]

I appreciate that

[@carrozzeriaepdr]

hi ken please i need some advice. I should buy a second lamp to make hail cars to be able to cross and do it faster. Do you recommend a small lamp or better another large one? now I work with a medium lamp. . Thank you

[@mdentrepair]

Noice mate.. same method maybe some blocks inside + brush touch 💯

[@BudAlex-p8t]

Крутой результат,классная работа💪

[@DentDiscountPDRBodyShop]

Thank you

[@sal87escobar10]

I could really use the pulley tower where did u get yours?

[@Panda_kg]

Great job.

[@marknoir]

You are the best!

[@50windycity]

What type of glue do you use

[@chisel83]

The best in the business

[@DentDiscountPDRBodyShop]

Thank you Chisel!

[@chisel83]

@@DentDiscountPDRBodyShop🥂

[@MrSzopenspn]

great job my master

[@DentDiscountPDRBodyShop]

Thank you I appreciate that

[@richardmaxson4499]

I wonder if you would be able to fix the side of my truck bed and what it would cost.

[@bradbiesecker162]

Question. When you do the 'knockdown,' what exactly are you knocking down? Is it where the metal is creased?

[@DentDiscountPDRBodyShop]

High points or crowns

[@bradbiesecker162]

@@DentDiscountPDRBodyShop I heard somebody once mention that doing so sends vibrations through the metal which softens it up or makes it more pliable. Do you know anything about that or have you heard that?

[@ffangoria]

Love your videos. What glue are you using on this repair, turned out great. Thanks

[@DentDiscountPDRBodyShop]

Here you go. Glue I use link Glue pdr-training-tools.com/en/products/glue-glue-guns/20/glue-pack-of-10/

[@ffangoria]

@@DentDiscountPDRBodyShop Thank You

[@DentDiscountPDRBodyShop]

Welcome

[@sidulbengkel]

Wow...exelent

[@SouthBayPDR]

love it

[@Ауф-и6ц]

Отличный мастер

[@haydarbarazi4698]

After that repair if I was the owner of that car eventually I would get it for painted,already saved money and Why not getting it painted

[@YouTooBeYou7]

Where are you located?

[@ericdungo316]

Sugoii😮

[@xESPplayer500x]

I say replace because that panel has a million rust points now. Its gonna rust out prematurely imo *edit* touch up paint helps but is nothing like the original material coating.

[@DentDiscountPDRBodyShop]

Right on thank you for your insight

[@lavalavamagazin]

Молоток!

[@РАУФШафигуллин]

Красавчик

[@MrKennyaa]

your sound tracking is off.

[@olegsamoshin9304]

👍👍👍👍👍👍

[@DentDiscountPDRBodyShop]

Thank you

[@مصطفیاختری-س6ص]

👍👍👍👍👌👌

[@wate_9872]

Why your not my Daddy!😢😅

[@zimmermanlandscape9287]

What is there to repair? The tire isn’t even rubbing

[@williamscoggin1509]

👍🏻🇺🇲

[@nickolasclarke9744]

Promo SM 😎

[@mrmalicious578]

What the hell is that body shop doing it’s much cheaper and better paying to fix that quarter panel and a much better repair I don’t do pdr I’m a body man much more convenient to fix it quarter panels don’t pay amazingly well could fix it very easily for 10 hours of maybe 2 hours of my time

[@matthewcostello3595]

What kind of glue was you using? Just ordered some tequila & anson.

[@ALEX.THE.RUSSIAN]

How much would something like this cost sir? Must be atleast 1600 for. Day of work not less?

[@DentDiscountPDRBodyShop]

$2500