Episode #384 On this episode I'm repairing a messed up quarter panel on an Audi!
Пікірлер: 77
@dianeruiz0721 Жыл бұрын
Boy, you do such a nice work! Seriously, no exaggeration. You make it look perfect just like new!!! you’re an artist my friend. God bless you
@autobodyadvocate60764 жыл бұрын
I've never seen a bodyman draw a style like on the car with a pencil before. Neat trick.
@trulygifted63014 жыл бұрын
It’s and old school method to recreate body line that was lost but Attention to detail is key
@EtienneSalvant Жыл бұрын
What is the name of the tool used to help get that line? It's not a compass? Any links to some of the tools used here?
@rrpinsanfrancisco85983 жыл бұрын
Very informative video. I always appreciate the craftsmanship!
@bunabuna92873 жыл бұрын
That is class mate!!!! Well done 👏
@dasrusse10303 жыл бұрын
A man gotta admit that his skills are unbelievable
@BlueCollarKyle3 жыл бұрын
Thank you!
@Speakinthatruthable Жыл бұрын
Great videos, man! I'm an estimator so actually being able to see how the repairs are done helps me tremendously.
@FrankieTheTech Жыл бұрын
Don’t write caca initials and learn this too. Not many good writers but the few out there are loved. I’ll buy a good writer a burrito lol
@JoelGarciaJaquez2 жыл бұрын
This is an art, not everyone can do this..
@alexpearson85384 жыл бұрын
Excellent use of the MoClamp 0800 tac'n'pull with 0803 pull plate!
@DIYCustoms3 жыл бұрын
I like that body line tool. Dang I wish I had that during one of my quarter panel repairs. Masking tape did help recreating that body line
@sillyboy32Ай бұрын
Wow. Some pit a decent dent in my Audi RS6 rear drivers 1/4 panel. Not as bad as this. Hoping they can fix vs replace the whole panel.
@davidwebb88773 жыл бұрын
Top job mate,greetings from Liverpool uk.
@llewellyn564 жыл бұрын
excellent work......great video....
@steveguest80282 жыл бұрын
Great video/repair 👍
@meticulousdetail51403 жыл бұрын
do you use etching primer or guide coat? Thanks
@MieleTouchtronic4 жыл бұрын
Nice work :-)
@fixx98392 жыл бұрын
i have about 8inch scratch , and a dent about 0.3 inch the dent scratch have reach the bare metal. should i epoxy primer first or just put body on top of it??
@JuanAguilar_DonJuan2 жыл бұрын
Have youn tried using a compass for the fender line?
@h1tm4n262 ай бұрын
how much would a job like that cost me to get done? i have a very similar job i need done on my car
@CoupeVD7 ай бұрын
You should replace that panel..That'll never be the same.
@dannyr333 Жыл бұрын
Didn’t believe u were able to make that quater panel come to looking new again. Alotta times just swap the whole panel but since it pulled back and idk maybe cost is less Idk maybe the work would be the same from detaching the q panel and install new one vs the jobber I’m watching now just pulling it out and finessing it with many bondo coats Regardless this is an art it takes much patience perserverence and confidence to start a job and believe it’s gonna look spiff when it’s done Gr8 vid Gr8 werk I’m out😊
@JSCRILLA253 Жыл бұрын
Done right!✅️ 🔥🔥🙌🏽🙌🏽🙌🏽
@976charlie95 ай бұрын
What are you sanding the glaze with?
@jamesbalsai8752 Жыл бұрын
Kyle please advise if this Audi had an aluminum quarter panel. Would be interested in seeing you repair aluminum panel damage Thanks
@FelizCuts Жыл бұрын
Nice work.. how many hours were allowed on this
@Tyani-sz6cg11 ай бұрын
Skills 👌
@leejustice13844 жыл бұрын
Buy a shrinking wheel you will love it.
@gentiandauti79704 ай бұрын
how much for something like that?
@EtienneSalvant Жыл бұрын
What was the tape used on the wheel arches? That looked beautiful.
@EtienneSalvant Жыл бұрын
Looked like imple masking tape. But at first looked so different. Lol
@7ZurdoOfficial3 жыл бұрын
Hi what body filler do you use (yellow) and then the blue stuff you put after ! Thanks
@JuanRamirez-xo1fq2 жыл бұрын
That yellow body filler looks like 3M and the blue stuff is Called glaze putty.
@knightshift2682 жыл бұрын
Round how much would this cost for a Chevy/GMC SUV?
@DaRkmatter5.8 Жыл бұрын
What tool are you using 2:15
@jamesbalsai8752Ай бұрын
Looks like a steel panel in this case not an aluminum panel.
@Adrian342 жыл бұрын
will insurance count this as totaled?
@megaman4201 Жыл бұрын
No
@joemyers84564 жыл бұрын
why you don't use tin instead of bondo?
@bonyembombardieru6831 Жыл бұрын
What state are you in?
@mostafaalaiwat77733 жыл бұрын
why do you use the tape while sanding
@BlueCollarKyle3 жыл бұрын
the tape helps make the body lines in certain situations
@umairiqbal1593 жыл бұрын
How much does it cost typically to repair something like that
@anthonya66932 жыл бұрын
My guess is around $2000 for just the repair prep and body would be more
@hamedisaac6442 Жыл бұрын
Great job What is the name of this frame machine?
@SuperMat1975 Жыл бұрын
Quick42 by Car-O-Liner
@hamedisaac6442 Жыл бұрын
Thank you
@rudyjhughes4 жыл бұрын
Which primer you using?
@trulygifted63014 жыл бұрын
Sherwin Williams SpectraPrime P30
@zippythechicken4 жыл бұрын
@@trulygifted6301 I would like to know the difference between that spectra primer and the Acme Finish 1 primer which is also by sherwin williams they are both urethane primer surfacers... i bet they are the same or close but the spectra is $125 more per gallon
@trulygifted63014 жыл бұрын
Zippy TheChicken one is budget line other is premier line, better quality (resins) cost more, just that simple, doesn’t mean it’s always better though. Insurance jobs usually pay so cost is justified to spend 125/gallon, while Budget jobs not so much. I have used Acme1 and had no issues but there is some shrinkage, and film build might be lower. I personally though don’t use sherwin Williams anything unless customer brings it. If your looking for good middle-game products, Upol hasn’t let me down and neither has Roberlo especially their HS Clears. I do about 15 rebuilders a month so I need consistent results at right price to have car on road for at least 5 years no issues.
@zippythechicken4 жыл бұрын
@@trulygifted6301 yes that is one thing i am not happy with shrinkage... I did a car with a brand i won't mention but it was inexpensive... i had cracking so bad from shrinkage after about 2 years it looks like the clear is crystalizing and falling off the car. ok it was fricken 5star which people seem to like but .. i put about 3 full wet coats of clear... also used 5star primer... not sure what i used for base.. probably ppg... not sure the guy i did it for even waxed the car but the stuff is turning into little crystals and flaking off... I am going to end up doing it again but not for free its been too long but ... idk .. its hard to get decent stuff now unless you want to pay $300 a gallon...
@Dean-gq3wf4 жыл бұрын
How long do you have to wait before sanding using the spectra primer? It still looks wet while he is sanding.
@kevovq3727 Жыл бұрын
Why u did not replace quarter panel like allways?????
@pumcarrillo60653 жыл бұрын
I think 13h repair 3 h pull 3h on wheel house just on the panel our rate is 44 $h 19h x44$ = $$$ but check your location for shop rates , the rate are different where you live , tec can make from 17$ to 26$ a hour on his pay check , 19 x his pay rate , this is just to repair the 1/4 panel he bid a lot more he remove a lot of the in side seats and ever thing ecl .... that all add on + part +paint =$$$$ There body tec and paint, and combo tec = a body tec that paints , they have it more hard , they fix it and paint it so they have to be good at many thing , , Two thing to note , it nice to do mud work on the car-line but that 140.k , and there chances the bond that hold the panel to wheel house came lose , and you would not think it make a sound , but with today car it could , seen it , , , but that a very good repair and 100% respect for tec
@DannyPablooo2 жыл бұрын
Would never repair my car like this, would cut and weld. That’s just me.
@cosminbanciu79583 жыл бұрын
It will be awesome and very helpfull if you can write on the video what tool are you using or what grit for sandpaper. Great job, i enjoy your videos and posts on Instagram.
@gokur.n.59893 жыл бұрын
You can find it on amazon its called “Body line tool”
@as6807833 жыл бұрын
@@gokur.n.5989 Thanks for this. Just what I was looking for!
@blessethishe Жыл бұрын
Makes one wounder if its best to just replace the panel itself and have it painted. Instead of this. Im assuming the price is just about the same. Labour to scuplt it is shown in the video or labour to just unattach the damage panel and replace with new one.
@megaman4201 Жыл бұрын
Cost is much more to replace the panel, more labor and parts.
@qSmokey3 жыл бұрын
Tools use in this video
@carlosvega84173 жыл бұрын
where are you located can you fix my quarterpanel ?
@justinblockett45103 жыл бұрын
I need you to do my BMW
@kcleach93123 жыл бұрын
let me guess , you have done this before? lol
@brianarrington45694 жыл бұрын
Jay cookie..........So what?? .......
@brianarrington45694 жыл бұрын
KYLE!!..SO..NOT ONLY DO YOU NOT ANSWER YOUR SUBSCRIBERS QUESTIONS!!!....YOU WONT EVEN ACKNOWLEDGE OUR COMPLIMENTS??!!.....YOU DONT HAVE ANY COMMON COURTESY......WHO DO YOU THINK YOU ARE???...
@Dean-gq3wf4 жыл бұрын
Bro he works hard. Im sure he has better things to do.
@landmarkboulders62262 жыл бұрын
@@Dean-gq3wf I disagree. He should be answering questions. Replying back. Would increase his success on KZbin
@noelr1010 Жыл бұрын
Lmao who hurt you bro
@Mucky_Muck2 ай бұрын
@@landmarkboulders6226 Not his obligation to do shit. The sooner you learn that not everyone will tiptoe around you to please you the better.