PDR Student Training - Body Line Dent

  Рет қаралды 68,341

Dent Time

Dent Time

Күн бұрын

Пікірлер: 44
@lohikarhu734
@lohikarhu734 Жыл бұрын
What spray are you using to clean/prep the surface for the glue pull? Do you use isopropyl for that, and get it really dry? Or something else? Do you ever flash the area with heat gun or mini-torch to get it drier and a bit warm?
@denttime
@denttime Жыл бұрын
Yes 91% alcohol
@earlbartlett4699
@earlbartlett4699 3 жыл бұрын
Thanks for the great content..coul you finish this job by staying with the glue pull and tap down or do you need to work it out from the inside? Thanks again, awesome work.
@denttime
@denttime 3 жыл бұрын
Thanks we worked the dent from the inside out.
@lohikarhu734
@lohikarhu734 Жыл бұрын
Are there any smallish "crease" tabs that you could try to pull that 'secondary' ding out, as it seems more linear than circular?
@denttime
@denttime Жыл бұрын
Yes there are lots of different ones.
@skwerl19890818
@skwerl19890818 3 жыл бұрын
Im really interested about that flash light
@buoowboob7526
@buoowboob7526 2 жыл бұрын
I had that dent today and completely Go rong after this video o understand how to deal with in future thnx. Im new trner on PDR
@RazaQureshi-ze9mn
@RazaQureshi-ze9mn Жыл бұрын
Bro what is the procedure to order this toolkit
@Ochtane101
@Ochtane101 Жыл бұрын
How ya doing guys? I bought a kit off Amazon , and it has the line board, the slide puller, ect…. Someone threw a rock at my car, while it was parked in my driveway? I found the rock next to my car, in the morning. Anyways, I find that maybe the glue that comes in these kits, isn’t strong enough, or something? I tried heating my dent up, just like your showing, and used a slide hammer, and the other type, where you squeeze the handle, and can’t pull the dent for the life of me? I’m looking into a professional shop now. I even pulled the door panel off, on the inside? Just don’t have the proper tools, I suppose? The glue tabs, certainly aren’t working.
@sugengdarsono5551
@sugengdarsono5551 Жыл бұрын
May i ask sir, what type or name that spray can make glue gone ? Sorry my English is bad
@ymg200
@ymg200 Жыл бұрын
I believe that's alcohol. 91% or so.
@Pattrk1031
@Pattrk1031 2 жыл бұрын
Try using a gimbal they have some affordable ones that are solid
@lildent5280
@lildent5280 3 жыл бұрын
What brand of torch never seen one like that for pdr
@denttime
@denttime 3 жыл бұрын
Snap on.
@lildent5280
@lildent5280 2 жыл бұрын
@@denttime thank you👍
@easye213
@easye213 3 жыл бұрын
Where do you find the Collision Glue?
@denttime
@denttime 3 жыл бұрын
Ansonpdr.com
@scoobyvenom
@scoobyvenom Жыл бұрын
I’d like to learning all the dent tools🥹
@claudesmoot1880
@claudesmoot1880 3 жыл бұрын
I have a question. If a dent has been left for years. Does it still want to return to its original shape?
@denttime
@denttime 3 жыл бұрын
It sure does. Metal never really loses memory. Now plastic bumpers do.
@pburrell2678
@pburrell2678 3 жыл бұрын
What’s a good temperature?
@denttime
@denttime 3 жыл бұрын
75-95
@kiarnastoon6475
@kiarnastoon6475 Жыл бұрын
I have a question..why do you place the tap down tool on the metal immediately before the tap dowm knock..does it make a difference if the tool is held solid on the metal before the knock rather than 'bounced' Ive been doing pdr for a few months working on my own vehicles and have wondered this quite often..
@denttime
@denttime Жыл бұрын
Always have the tip of the knockdown touch the panel. Go slow and be accurate. That naturally will build your speed. I do it so fast it looks like I’m tapping before it touches the surface of the panel.
@MH-on8ol
@MH-on8ol 3 жыл бұрын
Nice thanks Mike
@kuntz144
@kuntz144 2 жыл бұрын
For a DIY guy what the best overall glue without breaking the bank to munch? Thanks for the Video
@imrankhansaeedi6700
@imrankhansaeedi6700 2 жыл бұрын
Great job thanks
@nickmorgan3707
@nickmorgan3707 Жыл бұрын
Class bro
@lohikarhu734
@lohikarhu734 Жыл бұрын
Then, I saw the torch, and you wanted it a bit over 85°F
@happymaui
@happymaui 10 ай бұрын
Shane th Brain!!
@pradeepbehera7242
@pradeepbehera7242 2 жыл бұрын
My name is pradeep Behera I am a auto denter I am looking PDR job.
@muhammadhaziq8020
@muhammadhaziq8020 Жыл бұрын
Hello
@lucianomatos1672
@lucianomatos1672 3 жыл бұрын
Good job 🇪🇦🇪🇦🇪🇦🇧🇷🇺🇸
@maestrocars223
@maestrocars223 3 жыл бұрын
Учителю самому поучится надо. Приезжайте учится в Россию, тут самые жёсткие мастера. Мы делаем тяжёлые работы, и самое главное чисто и без бликов.
@fugglestick
@fugglestick Жыл бұрын
Please video landscape..portrait is crap…
@simsneon2
@simsneon2 11 ай бұрын
I would like to see dents repaired on the roof of a car that has a sunroof
@Kantry70
@Kantry70 2 жыл бұрын
👍👍👏👏👏👍😎
@janntcyberunclenicky7553
@janntcyberunclenicky7553 3 жыл бұрын
I wish I would find similar tools in Nairobi. I am willing to take a go Nicholas Gwengi
@denttime
@denttime 3 жыл бұрын
Check out denttrainer.com
@shauncooke9837
@shauncooke9837 2 жыл бұрын
You can only learn by going out with someone a bit of training with someone
@denttime
@denttime 2 жыл бұрын
That is completely untrue. All you’ll get is shadow training and not real pushing experience. Trust me.. been training for two decades and following someone is NOT the best training… only the most convenient for the instructor while they make money and you watch them do so. 😉
@АстемирХагожеев
@АстемирХагожеев 3 жыл бұрын
Ни одной серьëзной работы я от вас ещё не видел за всë время наблюдения кроме длинных разговоров и кучу инструментов которыми вы всё время хвастаетесь.
@ОматжонКозубаев
@ОматжонКозубаев 3 жыл бұрын
Здравствуйте вы тоже занимаетесь с PDR?
Saying Goodbye to Dents: The Paintless Dent Repair Process
15:49
How a Common Door Dent Is Removed - Paintless Dent Repair
15:04
Dent Time
Рет қаралды 68 М.
How Strong Is Tape?
00:24
Stokes Twins
Рет қаралды 96 МЛН
It works #beatbox #tiktok
00:34
BeatboxJCOP
Рет қаралды 41 МЛН
小丑教训坏蛋 #小丑 #天使 #shorts
00:49
好人小丑
Рет қаралды 54 МЛН
Mastering Paintless Dent Repair: Line Reflection Techniques
10:35
Aluminum Dent Repair PDR Student Training
58:16
Dent Time
Рет қаралды 60 М.
Lines and Tap and Tapping Down - Paintless Dent Repair
19:39
Dent Time
Рет қаралды 12 М.
Displaced Metal - How I Started This Nasty Bodyline Dent
17:20
Learn PDR Online
Рет қаралды 27 М.
Removing BODYLINE Dents! | GLUE or PUSH? What’s best?
11:09
1st Track Dents
Рет қаралды 288 М.
Basic PDR and Auto Body Slapper Use ... Demo & Theory
14:48
Top Gun PDR Training
Рет қаралды 63 М.
DENT TOOLS CHALLENGE! | Can I Do It?
14:18
1st Track Dents
Рет қаралды 1,1 МЛН
PDR Training with Myke Toledo
41:44
Dent Time
Рет қаралды 25 М.