Glue Pull Tab Review and Tapping | PDR Dent Repair Tutorial

[@Jadar92]

I love the ease with which you did the job. A good glue is very important and a good tool. All praise for your work

[@sydrider6023]

Did my first attempt at this today on my SUV, about 6 door dents, took me about 7 hres but the result is satisfactory and can't wait to see the result under day light tomorrow. 🤞. Thanks for this super interesting demonstration.

[@denttime]

Sure. You should also check out my tutorial website denttrainer.com thanks again

[@floorpizza8074]

How did it come out?

[@DARRELHOPSON]

How long did you let the glue/tab set before you pulled it off? I've a kit now, just looking for advice. Thank you for your reply.

[@dentdingking4878]

Super nice video Myke! I'm having very good luck with the reaper tabs too. They stretch when I get a really hard pull but they do the trick! I'd rather stretch a tab than fuss forever with a stubborn pit.

[@louistorres]

You are an amazing artist. Thanks for posting your videos.

[@denttime]

Thank you! Cheers!

[@darkquintet1047]

Hes a dikhead

[@mayankkakkar2945]

awesome video, can you please share the link to the light you are using during this task. thanks in advance!!

[@KarlBrouillette]

Thanks. Really like your demonstration. I had a try earlier before your video and was a bit disappointed. But I feel I can keep trying.

[@TheDentDemonBrandon]

That Camauto adapter looks awesome and those glue tabs definitely get great pulls! 👍👍

[@dentevo2259]

Awesome demo, tutorial, and edit Myke! 🔥💯

[@denttime]

Thanks Joe Dentevo.com 👊

[@vegitoblue7908]

Where can I get that reflection lights that shows the lines on the paint?

[@SswearFrmBkSs]

Did you figure it out

[@vegitoblue7908]

@@SswearFrmBkSs yes. Thanks

[@hussainal-sarraf5679]

Good job, I wondered if you could show, how the technician could decide the right angle when installing the LED light? Moreover, do all LED lights give the same showing or is there a different type of it? how could I select the best one among them, If I would like to buy it?

[@fishinginkayaks]

where do I get that light with the lines, cool and warm, thanks good video

[@ingioern]

Im so hooked on these vids. Imma learn this shit, looks so satisfying

[@denttime]

You’ll love denttrainer.com then 😉

[@mikep.9005]

Where can I buy the reaper tabs at. Great video thanks, never mind I watched your video again and you told where to buy supplies. 👍

[@denttime]

Dentreaper.com thanks!

[@ramymarty7149]

Thank you so much, I think you helping people with gaining more knowledge in that industry thank you so much for the good deed

[@paulc80]

Clean the surface with alcohol and let the glue dry for a few minutes. I’m just learning myself but I’ve figured that out so far. Also, put the glue on the tab and the dent!

[@richdresbaugh9954]

Where you buy the glue and glue remover?

[@Osdol]

Great content. Very thorough and helpful techniques. Very positive energy. Thank you

[@billstetler6769]

Excellent demo. Thanks

[@mikewright4562]

Where did you get your tools from

[@sanmiguel1166]

Excellent video.

[@osamaalmustafa3405]

Thank you Myke for the demo, I was thinking about buying them

[@denttime]

My pleasure. Thanks for checking the video out. 👊

[@kylsters]

is it just PVA glue, then isopropyl alcohol to release the left over?

[@miamirice6840]

that’s some impressive work

[@laleyendatattoobizz]

What glue gun are you using that uses the dewalt batt?

[@northbaybassanglers1068]

My uncle from north Idaho (DENT HUNTER- Rob Weaver ) completed dent wizard training and is done with his no compete contract and is now chasing hail all the way from Colorado to Idaho. I followed behind him for a year watching every move he makes while he marine corps style explained everything. Finally at 30 years old I’m hooked and want to fully get into it. My only problem is there is no school near me. Closet one is over 3 hours away. With twin girls, wife, and bills a move just isn’t in the picture. What else could I do to get more advanced and become a “technician”? I’m in Northern California

[@VanishingNomad]

Go to the junk yard, buy a junk hood and start practicing.

[@elmiewho29]

@@VanishingNomad exactly what he said. Practice makes perfect.

[@Pap3rPlanesss]

Also from Nor Cal, sucks how every class is more down south! Turning 30 in a couple month

[@floorpizza8074]

I'm fairly certain that KECO does on site training.

[@denttime]

Sign up for DentTrainer.com and when you’re fully committed get some personal PDR training. If you’re serious you’ll find a way to get good training even if it’s far. Otherwise you find an excuse. PDR is hard to lear but it’s worth it if you’re the type who is passionate about it.

[@vincrossi]

Very nice job..greetings from Italy

[@marcustoms]

Thanks for sharing I learned so much.

[@klanglala7577]

Man this is a great video.

[@mikejones5772]

that light is awesome.

[@muhammadayaz7440]

Which spray did you use to remove the glue?

[@francof7720]

The glue looks so good when removing it. By the way, what kind of material are the TABS made of?

[@finley614]

That was a great demonstration

[@ЧокоБоков]

Excellent work, where can I buy such a lamp? with stripes

[@denttime]

Ansonpdr.com stuckeytools.com and UltradentTools.com

[@kodysmith7563]

I need help desperately...I've tried and tried and I just can't get the tabs to stick.. I've done everything exactly the way your showed in video's but the first slight pull and it pops off

[@kcjones2737]

Same problem bro. Especially in warmer weather 🤷🏻‍♂️

[@charlesbass4651]

do you recommend heating up the surface after the alcohol cleaning?

[@denttime]

Absolutely

[@RayanTurkman]

This is so professional

[@freeskier175]

Nice work

[@denttime]

Thank you! Cheers!

[@Vision42_]

Exellent bro, absolutely Exellent

[@GruntMuffin]

Ue are you using by chance?

[@grahamhubsch9610]

Flipping amazing bro 🙌 👏 👌 🔥🔥🔥🔥

[@denttime]

Thanks 🔥

[@fubartotale3389]

The light seems similar to an optical flat, what is it called please?

[@KirksAuto]

That was awesome!

[@christophemartin6340]

Hello what is the model of your lamp thank tou

[@denttime]

Elimadenttools.com

[@samuka3887]

Sensacional 👏⚒️⚒️

[@gersonjesusdelreygutierrez3700]

Como y donde puedo comprar sus productos? Gracias por los videos

[@sasa111]

Very nice work

[@denttime]

Thank you. Appreciate it.

[@dailydrivenmedia_]

How much would it normally cost for someone to do just one of those dents on a car door? Is there a specific glue you would use on a thinner paint car like a subaru WRX?

[@namtrinh6142]

You are professional 🎉

[@brunohelderbh]

Show 👏🏼👏🏼, parabéns pelo ótimo trabalho, saudações do Brasil 🇧🇷 🙋🏻‍♂️

[@arye_amsalem]

I need the name of all.the.products used here and models thanks

[@hokagitumuyuki2925]

I need that kind of pdr lump

[@OnePointLander]

Can you use this same technique on aluminum?

[@denttime]

Yes indeed.

[@01XBOSS]

Thank you nice video

[@denttime]

Glad you liked it

[@luisorellana3392]

Them a pro👍👍👍👍👍👍👍👍👍

[@RaymondCrepeau]

nice job

[@denttime]

Thanks!

[@rodolfoluiz341]

Perfeito!!! Mesmo não entendendo a língua consegui entender as ações!!!!!! Se puder queria comprar um luz com esses efeitos.....grato Brasil

[@TheCarlosBrandy]

Great! ❤

[@shkenctari1]

very good i subscribed

[@JaRuuizz]

Jus got the super pdr kit from amazon, the glue def doesnt pull that hard, thats crazy.

[@diobasilico4972]

What mm was that tab?

[@Boogaisgood146]

whats that thing he uses the entire time with the black handle and the tip touches the car where the light is whats the tool called . .. .... .... .

[@sli8462]

I pulled a dent out almost to perfection... Then I decided to pull once more and created a bubble... Smh. Any idea on how to fix this

[@yocotobigeri]

Quindi il martelletto lo uso quando il bollo esce troppo, colpisco seguendo le linee fino a raddrizzarle? Il martello si usa solo per sporgenza quando ho tirato trnppo il bollo?

[@kcjones2737]

Bro how is that glue setting up that fast?

[@keithlanning7381]

thank you so much for shareing

[@LaHandleAbhi]

does glue scrape off the paint ?

[@denttime]

No, but occasionally it can pull paint.

[@ernestoyap9855]

Just asking,,,is there someone who pushing at the back of that dent or nothing?

[@RaymondCrepeau]

when tapping down are you on the line our in beteen

[@denttime]

On the line. Thanks

[@valeriehagman4088]

tried to glue pull some dents, pretty successful but not quite there, Tequila glue and reaper tabs small dents and pulled 6-8 times and still not all the way. Hood temp is 70 degrees, I am outside and can't get them all out, about 20. Looks way better but only about 80-90% good.

[@fabiolas4]

Scares me doing this because I once pulled the paint off the dent, so it went from a quarter size all the way up to a 3" disaster, no joke... I have a Challenger also and knock on wood I have no dents yet but the day I do, you know damn well I'll be pissed. I have the amazon puller and tabs of what your using.

[@jnvc7270]

Does tapping ever leave small marks on the paint?

[@denttime]

Yes but not permanent

[@officialWWM]

Amazing!

[@muhammettoker6059]

Perfect 😎

[@ismaelfernandez9019]

What chemical does the bottle have to remove the glue?

[@denttime]

91% alcohol

[@ایمانطرقی-ي9ذ]

دسخوش استاد دسخوش به سخاوتت

[@khaledchicho1945]

Thankio

[@gabryelleresende3525]

Excelent!!!

[@razikguerrioune3222]

Good

[@canalcaribeno]

Hi! in order to take the course, don't you need the tools first. Please let me know how much the tools cost so i can't buy it later on near future please, including the light system. Thanks in advance.

[@denttime]

Actually, you’ll want to watch the course first because that’s what it’s about initially is about purchasing tools and how to use them. The most common problem people do when they first try to learn PDR. Is they buy tools that they don’t know how to use or understand. On Denttrainer.com.you’ll see the foundation from step by step. Start with the main course called Ground Zero Pdr Training. You won’t regret it, and you’ll save lots of money, including tool discounts for the tools that I mentioned. Good luck. Thank you.

[@lucianomatos1672]

Good job🇪🇸🇧🇷🇺🇸🌎

[@ahmadghanem2414]

Awesome

[@SUBZEROUKS]

Skills.

[@obsidiansuby]

Ain’t Mike Toledo productions 😂😂😂😂😂😂

[@mojojoji5493]

Kinda messes with the clear coat but way better than a dent I gotta get my car done

[@kimkallestad3017]

Good work but i think it would save u some time if u didn’t pull that hard with the puller, i did the Same thing and i found quickly out that it made the process longer, what i did was massaging the rigger slowly until i saw it was far enough out to massage it back to its place

[@kimkallestad3017]

Hope it is a good tip if u haven’t found it out yet ;-)

[@savage6394]

So, in the second 1/2 of your suggestion you recommend doing exactly what you recommend not to doing in the first 1/2. Pull it “far enough OUT to massage it back to its place”.

[@savage6394]

Which, funny enough, is exactly what is show in the video.

[@shanejones5885]

Decent video I like how you went into some detail about the tabs but if you have any type of expensive car the owner will lose his mind if you stick your alcohol magnet on the paint. Just fyi. Coo video tho.

[@denttime]

Thanks but you should see when we have to tap down on the paint 😉

[@jcuadrado9518]

landscape recording please... but helpful vid regardless

[@denttime]

I film only portrait mode now. Thanks

[@alvinalvin-g2r]

Greatttt

[@zussstudios7189]

What if the car was vinyl wrapped in expensive colour ?

[@BetoCuritiba]

Perfeito!

[@اسامهسعدونالشمري]

❤❤❤❤❤

[@wellingtonmendonca2971]

❤

[@lucianomatos1672]

Thanks🇪🇸🇪🇸🇪🇸

[@Nathanisinthe]

Freakin magic

[@vehiclesprayerssociety]

❤💪❤️

[@JairSilva-zw7qq]

OI MEU AMIGO TUDO BEM COM VOCÊ SOU DO BRASIL TO APRENDENDO MUITO COM VOCÊ VEJO TODOS SEUS VIDEOS ESSE VÍDEO QUE EU ESTAVA ESPERANDO COM VENTOSA FAZ MAIS VÍDEO COM VENTOSA PORQUE TO COMEÇANDO AGORA E NÃO TENHO TODAS AS FERRAMENTAS AINDA AQUI É CARAS AS FERRAMENTAS NÃO TENHO DINHEIRO PARA COMPRAR MAIS TO COMPRANDO AS POUCOS OK MUITO OBRIGADO DEUS ABENÇOE.

[@quoteswaislamichannel]

👍👍♥♥♥

[@edwardjames2508]

تم

[@AntonioCarlos-uc1mk]

muito top parabens

[@martinsinvestimentos6297]

🇧🇷🇧🇷🇧🇷👍🏻👍🏻👏🏻👏🏻👏🏻

[@narceliminator3382]

Try that on an old car wouldn't work only on these thin skinned junk we have nowdays

[@denttime]

Indeed PDR works on older cars. Watch my other PDR videos on the classics. 😉