Desk Pop: Shadow Systems MR920 Elite: it has no equal.

[@outoforder6600]

Fun fact: Shadow systems use the same exact nitriding process at HK. Thats why the finish holds up so well

[@who6is3he]

i bought mines in 2020. 4 years later the barrel paint had faded. Called up their customer service and they told me that they used a new coating starting 2023 and basically sent me a new barrel ($250 MSRP) and said I can keep the old one. Their customer service is ELITE.

[@bgreat5111]

Another fun fact. It’s just a gen 3 on steroids 😂

[@outoforder6600]

@bgreat5111 no it's not. Gen 4

[@bgreat5111]

@@outoforder6600 yeah sure they are.

[@outoforder6600]

@@bgreat5111 they litterally are. Shadow says this, pretty sure they know. Not to mention uhh.. the mag release is a dead give away. But choose to be ignorant harder i suppose

[@daveevans7151]

+1 for the MR920, love mine as a carry piece. Light, dead-on accurate, flat shooting (added the comp), so many positives...totally worth it for me.

[@ArmedCitizensSociety-ACS]

Super cool photo opp. Well done. Just ordered my first Shadow Systems!

[@DavidBrown-wo9ip]

Two years ago, after being on the Glock platform since ‘99, I sold them all, and replaced them with five Shadow Systems guns from the discontinued Combat line, two of them MR920’s, a DR920, an XR920, and a CR920. (The latter I bought used at the same Scheels you bought your MR920 from). All of them, except for the CR, have the smallest grip attachment, simulating a 1911 grip angle. I have ZERO regrets about switching from Glock to Shadow Systems. We’ll disagree on the PMags, but excellent review.😎✌️

[@alvarotoledo3696]

The MR920 Elite with the Radian Ramjet and Afterburner is the complete package. I’ve shot both the MR920P and the MR920 with the Radian afterburner and while it’s just a slight difference the Radian still works better at recoil. With the barrel being ported and then adding the comp it makes it perfect. Superb engineering by Radian. MR920P also shoots flat just not as flat as the Afterburner because the barrel is not ported. That is what makes the difference.

[@thatguywhogames2373]

I rock the MR920P Elite that comes with their patented quick detach comp. The grip texture is perfect always allowing me to cement it between my hands. People argue that "glock is the only/most reliable firearm" this is damn near perfect and looks 300% better 🔥

[@sneakkingDaRegulator]

Love my XR920, thinking about grabbing a MR920

[@xAdonis03]

I have a CR920 and XR920 I was thinking about the MR920L to mix and match... but I do love the XR920 for my carry gun. Now I'm looking at the MR920 elite thanks to you.

[@jonh7084]

I'd go mr920p

[@SeaNNyTizzle]

Might of missed it. Who makes that mag extension early in the video at 10:20

[@AtoZEDCreviews]

It’s a Glock +2 baseplate

[@rudyramos2333]

I love my MR920 Elite in FDE so much, I bought an MR920 foundation as a backup.

[@dustyd6617]

Nice video. I'm a big Shadow Systems fan as well.

[@zzhangzzz1735]

question. can the mag release switch to the other side.I'm lefty and the factory magwell be replaced with other Glock magwell

[@AtoZEDCreviews]

The MR920 takes any and all Gen 4 Glock accessories and parts. So if there’s a swappable mag release, then yes. I wouldn’t know because I’m not a lefty, so I’ve never had to modify a Glock for that. And yes any quality aftermarket magwell should fit.

[@victorortega2718]

I got the mr920 elite with the smallest back strap the provided i still dont like the angle lol i love the gun so much but i keep wanting something like the sig x macro do you know if there are any companies that sell back straps that will make the grip more slim ?

[@AtoZEDCreviews]

@@victorortega2718 unfortunately, there’s no way to make a double stack pistol grip as slim as a “stack and a half” as many people refer to the slimlines and microcompacts like the P365/G43/48

[@L1Z1O]

Take a look at the CR920XP. Basically the same size as the MR920, just slimmer and already comped… IF you can find one!

[@Ridiculogical]

Why this over the XR920? I'm trying to learn the differences as to which one is a better choice.

[@AtoZEDCreviews]

The XR didn’t exist when I bought this. So that wasn’t a choice I made. The XR is essentially a g19x size while the Mr is a g19 size. So with the XR you get the compact slide/barrel and the full size 17 round grip.

[@RudeIsRuined]

What’s the compensator called?

[@gregtso7505]

Thinking about getting the mr920 foundation as my ccw.

[@Tiggiesmalls123]

What I got love it

[@damienejenkins1919]

I also own the SS MR920 Elite. Being a lefty, I have not found a (Left-Handed) Safariland holster that will fit. What do you recommend?

[@jaimesalgado9666]

I have a radian ramjet on my G45, it’d be cool to swap it on a shadow systems mr920 if I had one but doesn’t the MR920 run a Gen 4 platform which means it needs to run the Gen 4 radian ramjet?

[@AtoZEDCreviews]

@@jaimesalgado9666 correct, MR920s are Gen 4.

[@getsomegear7617]

@@AtoZEDCreviewsare all shadows gen4? Wonder why they don’t put this out.

[@AtoZEDCreviews]

@ except the CR series because those are based on g43/48 models. They also just released Gen 3 slides

[@AtoZEDCreviews]

It was just brought to my attention that comments were somehow turned off. My apologies everyone, I’ve always had my settings set to comments-on.

[@Pb_vic]

What gen. radian ramjet and afterburner combo, did you buy to put on your mr920? I see Gen 3 and some say Gen 4, but I can't get a definitive answer. Thank you

[@AtoZEDCreviews]

@@Pb_vic Gen 4

[@lancerobinson9097]

Staccato replaces your gun as well

[@JimSkeltonKnives]

@@lancerobinson9097do they? That might be a newer thing, and I haven’t heard anyone bring it up before. Good info, thanks.

[@robertsalyers1351]

No worries Big Dog

[@bestjobiveeverhad1348]

Its very light. I love how the magwell wedges your hand perfectly on the draw. Its my summer carry. Idk why but it shoots better in heat. I have to take the magwell off. It prints to much. If your justified in a shooting. You'll get you pistol back.

[@Mike-ox1bu]

Very good thorough review! What are your thoughts on the new CR920X and soon to be CR920XP? Thank you.......

[@AtoZEDCreviews]

@@Mike-ox1bu the CR920XP looks to be the perfect microcmpact. If I hadn’t have just built up what I think may be the ultimate P365 comp/carry build, the CR920XP would be my next purchase.

[@Mike-ox1bu]

@@AtoZEDCreviews Thank you! Hope you do a review on it.

[@Joelsinferno]

28:48 I naturally ducked thinking you flagged me in person 😂

[@FujisamaProductions]

I have the MR-920 War Poet with a TLR-1HL and the 507C optic it comes with. This is my first handgun I’ve purchased recommended by my brother. I love the feel and the build quality of it. I have only 200 rounds through it so far, and I have had no issues but I do have a question. Would anyone recommend me changing the barrel out for the one on his gun? It looks nice and the compensator is cool, but I’m worried about being limited on holsters. Thanks for reading.

[@AtoZEDCreviews]

The holster selection won’t be limited. You’re just buying for a Glock 17 fitment instead of Glock 19. The Radian ramjet & afterburner is truly a game changer. For those who want slightly faster followup shots because of less muzzle flip, I can’t sing its praises enough. They did an excellent job.

[@jamr3116]

Great video. I love my MR920 combat and XR920 Elite. Shadow systems makes great guns.

[@AtoZEDCreviews]

Congrats on a great pair.

[@Shoot_25]

My mr920 doesn’t fit my 19 holsters at all… what company do you use ?

[@Swooptywoop]

Whats the trigger? Mine doesnt seem to sit so flat when pulled

[@AtoZEDCreviews]

Overwatch Precision. As mentioned, it didn’t make a world of difference on my MR920, but it did a decent job on my CR920 and night and day on my PSA Dagger Mini comp. Of If I were to do it all over again, I would do a Johnny Glocks trigger in my Shadow Systems pistols for sure.

[@surfsidegunny4734]

Job well done, I learned a few things from your video.

[@AtoZEDCreviews]

I’m glad to hear that, Thank you.

[@MichaelSmith-cq4zk]

You.almost got me ready to go buy the one with the comp

[@sarge131]

Holster question: If I can't find a Shadow Systems specific holster, would this fit in a G19 or a G17 holster considering the comp?

[@AtoZEDCreviews]

Prior to adding the comp, for the first few years of carry, I used a g19 holster. Now I use a g17 holster because of the additional length the comp adds.

[@Redz615]

What mag is that?

[@AtoZEDCreviews]

@@Redz615 stock Glock 19 mag with a Glock +2 baseplate.

[@accord50]

Your The Radian RAMJET with AFTERBURNER is for a Gen4 Glock ? Did it reduce recoil that much ? I know that the price now is in the neighborhood of 399 dollars.

[@AtoZEDCreviews]

Yes, everything for the MR920 is Gen 4 Glock. It’s a noticeable difference. If you already have good fundamentals then it can make a difference for you in your speed. But it won’t make up for a lacking grip or anyone who feels that 9mm is “powerful”.

[@accord50]

@@AtoZEDCreviews Sounds good to me ! I will be ordering the Ramjet mine. Thanks for the info ! Stay safe !

[@Fantom_axg]

Did you get the gen 4 radian ramjet ?

[@AtoZEDCreviews]

Yes, Gen 4 is what the MR920 is based on

[@danball3614]

My application is pending and I already have one bought. Cannot wait to pick it up.

[@SINISTER_CONCEPTS]

Question does the ramjet when adding still fit in a holster that you have had previously before putting in on? Also i went to the site only says Glock which one would i purchase to fit my MR920 n finally this is Jim Skelton right? 😂

[@kalanipitmon7817]

I think u would need a g17 size holster. Could be wrong tho if a g19 holster is open at the bottom

[@AtoZEDCreviews]

Yes, this is Jim. You’ll need a G17 length holster, yes. For the afterburner/ramjet you need to select Gen 4.

[@SINISTER_CONCEPTS]

@@AtoZEDCreviewsnew subscriber 🙌🏽🫡🥃

[@AtoZEDCreviews]

@@SINISTER_CONCEPTSawesome, thanks so much!

[@porchjoe]

What mag extension is this?

[@AtoZEDCreviews]

@@porchjoe OEM Glock +2 mag baseplate

[@porchjoe]

@@AtoZEDCreviews so its a Glock mag but what I’m asking is what brand is the mag extension and where can it be purchased?

[@AtoZEDCreviews]

@@porchjoe yes it’s a Glock magazine but I wasn’t referring to the magazine. I was answering your question directly. Glock manufactures the baseplate. I bought mine in a retail store, I’m sure you can order online from a dozen places.

[@porchjoe]

Sorry, I misunderstood you. Thank you.

[@roycelabor4339]

Great review Sir! I have both the SS MR920 Combat and CR920P. The MR920 is the only pistol that I've shot that approaches my benchmark for accuracy and shootability which is my Colt Combat Elite. I did the same thing with my Glocks. I'm a fan of Glocks, but dang, SS knocks it out of the park! Keep up the great work!

[@goonbaby556]

What gen afterburner do i get for mr920 i heard its based on gen 3 then i gen 4 ?

[@AtoZEDCreviews]

Gen 4

[@oakwoodmike]

Can you put a gen 4 slide on a SS??

[@AtoZEDCreviews]

No idea, wish I could tell you. But if you did, you’d be losing out on some big benefits of the MR920 like the match barrel and of course the optic cut.

[@MikeScott32]

Do you have a build list of the parts you’ve added to this pistol?

[@AtoZEDCreviews]

Super easy: Holosun 407C x2, Overwatch Precision trigger, Radiant Ramjet/Afterburner and Surefire X300U-B light. (All described in the video too).

[@MrSymbolic7]

The MR 920 P has the factory comp , but it is hard to find in stock these Day's !

[@GucciKraken]

Got the mrp 920. Sweet piece

[@chrisgillenwater1395]

Love my SS MR920 War Poet! I don't think there's much diff between the WP and Elite, but after months of shopping I found the WP for over a hundred less than everyone's Elite price so I jumped on it!

[@AtoZEDCreviews]

Correct. Except that you get the cool red trigger safety out of the box and slightly different slide cuts.

[@michaeljmctifue]

Do these take g17 and g19 mags

[@AtoZEDCreviews]

Yep, they sure do.

[@Taticalchris]

They also have a a mr920 p version as well it’s done the same way as the cr920 p

[@JimSkeltonKnives]

Yes indeed and it’s so nice. But that came out years after I bought this, so it wasn’t a choice back then, unfortunately.

[@DME04]

I bought the MR920 War Poet and couldnt be happier. Have you thought about getting the CR920P War Poet over the Elite? That might be my next purchase as my CCW.

[@AtoZEDCreviews]

Absolutely. I love the War Poet aesthetic. Definitely a consideration.

[@Patriotx-gx4ce]

I own Elite and daily carry. Selling points to me were reliability, out off box extras and weight or lack off it. Ability to add most any red dot site if you want the correct way and high quality night site.

[@guillermodvl]

I have the MR920 ELITE and added a Shadow Systems compensator. Now it's perfect.

[@AtoZEDCreviews]

That is the perfect solution, but as I explained in the video, I moved to a shitty restricted state unfortunately, so they aren’t allowed to ship me a comp. I tried.

[@Jrock628]

you should try tactical poontune drop in triggers, they are great!!!

[@AtoZEDCreviews]

I’m not a huge fan of the guy’s odd attitude I’ve seen from his videos.

[@Jrock628]

@@AtoZEDCreviews what about johnny glocks?

[@me_rap27]

How much it cost now?

[@AtoZEDCreviews]

The stock pistol at retail? Or are you asking what mine costs with the couple of upgrades I’ve done? The Elite is still 989 from the retailers I checked, no price increase

[@Rustypan471]

There is video talking about why they chose the p mag’s

[@JimSkeltonKnives]

Yes there is. But there still is no justification IMO.

[@TaterGrabbinBass]

Shadow Systems has their own compensator that goes onto their threaded barrel, it’s a bit longer and not as good looking as the Radian compensator but it’s at a fraction of the price and it works just as good. I’ve used both the Shadow Systems and the Radian comps and they shoot damn near identical, the only difference is price and length. My SS MR920 is for “cold weather” edc because of the added length of the comp and the polymer frame and my CZ P-01 is carried the rest of the year and that thing is an absolute BEAST, the SS doesn’t even compare because I’ve turned it into essentially a small carry race gun with a dot. But the SS is a great alternative to Glocks and the trigger is slightly better out of the box, I’ll be putting a Ramm Tactical trigger in it soon to try out something new.

[@diggs469]

Glock magazine is unheard of and I am shocked by this information

[@tianlamian]

cr920xp vs this is the current internal struggle

[@trstrong87]

Just got the MR920P with the tool-less removable comp and absolutely love it

[@AtoZEDCreviews]

I would buy the cr920XP if I didn’t have this and were shopping today. And honestly, already owning this and a cr920, I’m already planning on buying a cr920xp. Definitely worth the money.

[@waynejnessjr]

Just letting you know in case your afterburner takes a shit on you shadow systems makes a compensator that threads onto the original barrel and it works very very very well

[@JimSkeltonKnives]

Yes, they do. Unfortunately I’ve tried buying it before but they can’t ship to the state I moved to. Thats why I switched to the afterburner.

[@Norp-i7m]

@@JimSkeltonKnives Oh, because of the threaded barrel?

[@AtoZEDCreviews]

@@Norp-i7myep. Which is stupid, since I was just buying the comp which means I already had the evil threaded barrel lol

[@MichaelSmith-cq4zk]

I brought the mr920l and never looked because of the warranty, i was not a fan of the mags ,but they run fine the slid is just a little longer, but i have no problems ccw with a holison 507c and a tlr7 light and these guns fit the glock 19 holsters mine was made by teir i with a spare mag ,and the only people that know i have it know i pack daily ,even to the toilet ,cause why inter fear with a good dump just waite till you past the door to the thrown 😂

[@rodneyobrien4624]

You get all those extra features over the Glock, but the main one is it’s made in the USA 🇺🇸

[@charles17508]

Arnt glocks in us made in Georgia oh snap us glocks are made in Georgia.

[@americanguns6732]

I have the same pistol, also bought it in early 2020. I agree 100% with everything you said about this pistol except… While in general, I feel the exact same way about aftermarket mags for anything really, especially Glocks, but the PMag is NOT an aftermarket mag for the Shadow Systems, it is the “Factory Mag”, meaning the gun was tested and designed around it. Not only that, but if one were to run the 15 rd G19 mags in the pistol, while they will work fine, in the event of a type 3 malfunction, or something that jams the gun up and the mag with it, there is no way to get a purchase on the bottom of the mag (if your also running the Shadow Systems included magwell). With the longer mags as you show it is not an issue. All that being said, I have dozens of both factory Glock mags from G19’’s to the 33 rounders and also dozens of PMags in 15, 17, 22 and 27 rounders and they all seem to function fine. I may have had 1 or 2 malfunctions in the time I’ve had this gun. I shot IDPA with it a couple years and USPSA with it for as few years as well. My wife and I are pistol instructors and I use it as my range gun while teaching and when I train, it is my primary pistol as well. All that to say it’s seen more rounds than I can attempt to estimate. You sir are correct, this is a very fine pistol, for just about anything you wish to use it for. I would say however that the PMag, when used with a Shadow Systems pistol, should not be looked at as aftermarket but as the stock mag and 0 reliability is lost to using these over the Glock mags. If anything, and it’s splitting hairs because the gun runs practically flawlessly on any mags, I’d say the PMag is slightly more reliable than the Glock mag. Thats right, slightly MORE reliable than a glock mag (IN A SHADOW SYSTEMS PISTOL). In a Glock, NO, Glock mags are superior. Anyway, to anyone looking to purchase a shadow systems pistol I would say absolutely do it. The only drawback is that you will probably never buy a Glock again as shadow is making about every version of 9mm Glock that Glock makes now and then some. I know I wouldn’t dream of buying a new Glock when for $300 more I could have a shadow. That’s my thoughts. God bless

[@Norp-i7m]

I appreciate all the good info in your comment, but please consider using paragraphs next time.

[@AtoZEDCreviews]

Good points and you may well be right about the Pmags, but since I already have Glock mags and all have worked perfectly, I won’t need to find out lol

[@IchigoTheQuincy]

Premium tier glock and im here for it

[@benlusis6765]

Doesn't the Randian Ramjet Afterburner compensated barrel have more hype and good reviews than the larger Shadow Systems Comp he mentioned? Seems like he just got a better comp and barrel that happens to be 50-state legal.

[@BrandensOutdoorChannel]

Cheaper to buy the P version with the comp than buy a Radian Ramjet.

[@AtoZEDCreviews]

I agree. That’s why I had a lengthy discussion about exactly that in the video. Where I talked about moving to a non-freedom state and shadow systems not being able to ship a comp to me here for the gun I already owned from living in Texas. And buying the P version when I already owned this gun would have been a big expense above the cost of just buying the Radian setup.

[@alvarotoledo3696]

Radian looks nicer and works better but not by much.

[@SteveHall-e8g]

I am a remorseful buyer of a MR 920 elite. I bought it brand new. And had issues with it immediately out of the box, initially chalked it up to break in issues. 600 rounds later, the problems with light striking, and the gun not going into battery still kept happening. I shipped it to shadow systems using an FFL, the gun was gone for 3 1/2 weeks without any update on whether it made it there or not. The gun then came back the paperwork saying it had a bad firing pin, took it back to the range and instantly had the exact same problems all over again…….within shots. I tried calling for a refund and they told me they’d want to look at the gun again so now I am shipping it to them for a second time to see if they can actually do the job correctly this time. I don’t think they’re going to buy it from me, unfortunately. So I am going to sell it and do what I should’ve done in the first place. Get the HK.

[@AtoZEDCreviews]

Oh shit man, I hate to see that. I hope that one way or another, they get you sorted out. I’d be pissed after spending nearly a grand on a gun only to get a lemon. I’ve been there before and I remember how crappy that feels. Best of luck on it and which HK are you considering?

[@imightjustwatchyourchannel4550]

The 920p come with a clean as glass comp combined with the bronze barrel

[@AtoZEDCreviews]

Yes it does. I wish those were available back when I bought mine, but I’ve had this a long time, I think the MR920 had been out on the market for about a month or two when I bought it.

[@richardj3715]

They have a separately sold comp that screws on the end of the threaded barrel.

[@AtoZEDCreviews]

@@richardj3715yes, and I don’t remember now if I spoke to this in the video, but I meant to: where I live now, we have stupid restrictions, so shadow systems wasn’t allowed to ship my order to me for the comp when I tried, so they had to cancel it.

[@billyrowland12]

Sons of Liberty Gun Works has the same warranty to replace the firearm if you were in a justified shooting I believe that they were the first ones to do that but still both are a stand up company

[@bornactive8126]

The overwatch trigger made a huge difference in my MR920 you must’ve gotten a dud lol

[@xAdonis03]

Risen Gunworks has a better undercut but of course it's an aftermarket mod

[@ironlordoni8465]

If you bought the war poet version from sportsman’s guide it will come with the holosun on it

[@AtoZEDCreviews]

Correct. For the same amount of money as I spent on this MR920 and the Holosun.

[@ironlordoni8465]

@@AtoZEDCreviews yes sir I love it

[@leadkisses5416]

19:40 I definitely have a milled optic on a Glock 19 sitting lower on the slide than this pistol.

[@JimSkeltonKnives]

But I bet you have little baby screws like most optics use (and often shear).

[@leadkisses5416]

@@JimSkeltonKnives Nah, cross bolt mount.

[@seraph...4473]

P365 is more modular, thinner, lighter, and cheaper. You also can buy grip modules that turn the P365 into 2.5 different guns. It also has the ability to add a thumb safety to it. If you like concealing bigger firearms the MR920 is an excellent choice, but for me if a firearm is smaller and has the same capacity without any downsides it is superior.

[@AtoZEDCreviews]

@@seraph...4473 I agree. And my P365 and my P365 Spectre Comp also agree. But I didn’t want to get off into the whole compact vs Microcompact thing because my video was already too long lol

[@seraph...4473]

@@AtoZEDCreviews Thats completely fair, and some people prefer larger heavy firearms to reduce recoil. The point you made about Shadow Systems replacing a defensive use firearm is also super important.

[@kalanipitmon7817]

They literally come with different angle backstraps

[@AtoZEDCreviews]

Ok. You sound like you’re making an argument when nobody else is participating.

[@trevorj203]

I hope you were paid to say this. If not, you should not do any more gun.Reviews. The shadow system slides move up and down when you can you pull the trigger. This is crazy, I have guns that are a quarter of the price that do not do this. Go, look at yours. Watch the red dot and squeeze the trigger to the wall.You will see the slide, go up and down.

[@AtoZEDCreviews]

@@trevorj203 I’m not paid by anyone. My SS pistols run flawlessly, reliably and accurately.

[@trevorj203]

@AtoZEDCreviews so your slide dose not move up and down when you take up the trigger? If so your the first one. Never said they weren't reliable that areca glock. They are not worth the m0ney and far from the best the carry gun

[@AtoZEDCreviews]

@@trevorj203 I don’t know how little experience you have, but this is not exclusive to SS pistols. Many pistols do the same thing, and it’s not something to be alarmed by.

[@pilgrimpassingthrough2228]

I was just about to purchase one of these this week .......that is until I read all the negative comments about this firearm on many other KZbin videos and the poor customer service in dealing with the mentioned problems! No thank you! Will go with Springfield arms or S&W Stay safe everyone!

[@michaeljmctifue]

Where didnunread these

[@brojelio1518]

I did a deep dive before buying mine in 2020. Most people who had issues did not oil/lube and/or did not allow for sufficient break in period. I had zero issues. Their customer service was superb when I requested for my trigger to be smoothed out. Was good, but I felt that it could have been more refined. Fast response times, quick processing time, and the trigger they sent back was incredible-definitive wall, crisp clean break. M&P is great too, and that’s what my department issues. But I love my MR920. I prefer the Glock platform and SS does all the custom work I’d do anyways if I bought a stock Glock.

[@jamesbrogan85]

Great video! However, I just sold mine after buying the BUL Armory Axe C Hatchet... It has almost all of the features of the MR920 (except for the optics mounting system and the night sights), although it does have a very low-cut RMR direct mount and steel (non-night) sights. It also has a MUCH BETTER grip texture and deeper double undercut trigger guard than the MR020. I also prefer the Hatchet's slide serrations to those of the MR920. Furthermore, the BUL's trigger is nothing short of phenomenal for a Glock clone! And it's just $620!

[@JimSkeltonKnives]

I keep waiting and trying, but I guess I’ll never own the Hatchet. Just like I’ve missed out on both versions of their comped SASII Lightweight. Never ever in stock, then each were discontinued. I am setup for restock email alerts but have never gotten one email. I guess I’ll never own a BUL.

[@jamesbrogan85]

@@JimSkeltonKnives The AXE FS HATCHET - SILVER is in stock right now. And I prefer the AXE FS HATCHET to the "C" model! Also, yes, I know that the BUL SAS II UL Comp 3.25" is hard to find. I got mine about 10 months ago, when they were consistently in stock...

[@1993gtx]

Literally about to do the opposite... selling my Bul hatchet (despite the grip being onr of my favorite features) to get this gun.

[@MichaelSmith-cq4zk]

Ohh and i have about 2000 rounds threw it without a single problem

[@kevionterrell9605]

What the fuck did I hear in the beginning

[@AtoZEDCreviews]

😂

[@jaimesalgado9666]

For EDC shadow systems is a no. Quality control needs work and their customer service is terrible. Weird reliability issues on different batches which make it inconsistent.

[@AtoZEDCreviews]

@@jaimesalgado9666 historically, this isn’t true. I’m sorry if you had a bad experience, but gathering stories from owners online and from reviewers known for not taking $ for praise tells a different story. And while I only have a sample size of two with the pistols I’ve bought, I’ve had no issues to speak of.

[@jaimesalgado9666]

Good point however for me it’s the inconsistency that bothers me

[@tremaineangus6474]

Just a fancy Dagher for 500 extra. No thanks.

[@tremaineangus6474]

Dagger

[@AtoZEDCreviews]

@@tremaineangus6474 LMAO. Yeah…. No. I have a Dagger (I wanted to do a budget build for fun), and they’re not comparable in the slightest. But you would know that if you had watched the video and listened to the features and benefits that I spoke about.

[@h0cusf0cus]

wait what??? if u use ur firearm to defend urself ur going to lose it even if ur 100% in the right??? i never knew that, thats so dumb... if i knew that i wouldnt of spent so much money on an optic and stuff on my carry. >.>

[@dustinherring4146]

That is not 100% true

[@charles17508]

Id rather build my owen out of a glock .

[@AtoZEDCreviews]

I don’t know who Owen is, but as I discussed in the video, you’ll spend hundreds more to do the same things in a stock Glock, and some things that cannot be achieved on a Glock because Shadow Systems makes all of their own components and parts themselves here in Texas. They do so, in order to create things like the direct mount optic cut slide for every major mount footprint there is, and to mount low. The extractor channel that Glock has prevents this from being a reality. The angle of the rear of the slide to eliminate an area that can typically print when concealed, and so many other things. I’ve owned and carried Glocks since the 90s and now own exactly none because Shadow Systems made them irrelevant for me.

[@karledgren8150]

That’s a stupid statement don’t buy a great gun in case you have to use I want the best gun on my worst day

[@AtoZEDCreviews]

Well, the world is full of stupid people. They came out and voted in droves in 2020. So yeah, plenty of people have said that stupid crap. I’ll never get it. Of course I don’t WANT to lose a couple thousand dollar gun, but I want the precision and reliability of that level of gun on the off-chance it needs to be called up to action.

[@NORMandJAMIE]

What commie state...

[@84jdgregory]

Why buy a $500 Glock when you can buy a $1000 clone? I’m sure it’s a nice pistol.

[@JimSkeltonKnives]

Upgrading a standard Glock to this level (most of these are common mods Glock owners do), prices you about $300 more expensive than the MR920 Elite and on top of that, some things on this pistol can’t even be done on the Glock (such as the optics mounting setup)

[@84jdgregory]

@@JimSkeltonKnives I know dude. SS is Glock perfection “perfected.” I just think it’s funny. Building a G17 now and I’m already $1200 in. Hopefully somebody will make a ported and threaded barrel for the Gen 5 soon.

[@HectorGonzalez-bb7bm]

What magazine is that?

[@AtoZEDCreviews]

Factory Glock. With a Glock +2 base pad