Detailed how to- Spray painting matte black & making it look good!

In this video i show and explain how i paint matte colors in this case its matte black. I show how to make it come out even without lines or runs. This method i use works with all colors and gloss paint but especially works best with matte colors.
Subscribe to my other channel with this link below!
/ @texashondachannel
Go give it a view and let me know what you think! Godbless have a wonderful day everyone!
• Track Info:
Title: Skydive by Loxbeats
Genre and Mood: Hip Hop & Rap · Calm
Free Download: bit.ly/2uUKEmd
---
You can support this artist buying his album "Too Late For That" on Bandcamp. bit.ly/2TUKp9C
---
• License:
YOU’RE FREE TO USE THIS SONG IN ANY OF YOUR KZbin VIDEOS, BUT YOU MUST INCLUDE THE FOLLOWING IN YOUR VIDEO DESCRIPTION (COPY & PASTE):
Skydive by Loxbeats / loxbeats
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
creativecommons.org/licenses/b...
Music promoted by Audio Library • Skydive - Loxbeats (No...
** PLEASE READ THE SECTION, ABOUT USING THE MUSIC, BELOW **
---
• Available on:
Spotify: open.spotify.com/track/7jQVmt...
SoundCloud: / skydive
BandCamp: loxbeats.bandcamp.com/track/s...
---
• Contact the Artist:
[e-mail]
/ loxbeats
/ 123asd26. .
loxbeats.bandcamp.com
/ loxbeats
/ loxbeats
open.spotify.com/artist/2yTDt...
---
• About using the music:
- You can NOT claim the music as your own.
- You can NOT sell the music anywhere.
- You can NOT use the music without giving any credits in the video description.
- You can NOT remove parts from the license.
- You can NOT use third-party software to download the video/song.
- You MUST contact the artist if you wish to use the music on any kind of project outside of KZbin.
** IF YOU NEED MORE INFORMATION ABOUT USING THE MUSIC, PLEASE GET IN TOUCH WITH THE ARTIST **

[@sawale4784]

Thank you for all your help I'm painting my 2018 Audi A5, that matte black and this video gave me the steps I needed after sanding

[@shaunanthony9421]

Rattle wizard! You always seem to blow my mind with every rattle can video you make! The results of everything you rattle can literally looks like you used a gun! Looking forward to what’s in store for your other channel!

[@69mluis]

Dang you layed that paint down like a pro good job!

[@spoonfixer3387]

As always. Super informative and easy to follow. Thank you.

[@Jbrown99th]

at this point Rustoleum should sponsor you lol

[@JamesDguy]

Jordon Fairearth They should have long ago

[@stanthrasher4815]

Absolutely a pro!

[@P4rz3val]

HELL YES!!! I'm doing an LS Swap on my 79 Firebird and I'm painting it matte black and this video is the easiest to follow and I'm super confident I can do it now

[@ceasaraugustus1758]

Did you do it yet?

[@P4rz3val]

@@ceasaraugustus1758 Not quite. The swap has been taking longer than expected thanks to a bunch of small issues that have been getting in the way. The biggest one being Holley sending me the wrong ECU harness for the model year engine I have so it's been super frustrating.

[@JayTX.]

I've also been painting for years as well 33 now have no idea why I'm here lol About to do my 2nd 85 C10 just getting ready I guess. Nice vid much love from East Texas

[@DonaldWells]

I am painting my ford lightning 2003 in matte black to save some money and I must say this paint is the truth thanks for the tips about chasing the paint that really helped me out as a beginner.

[@unstablebobgable]

Looks real good, boss. You are a wizard with spray cans!

[@JamesDguy]

unstablebobgable I try to be haha

[@Squishmallows24]

I’m so glad I came across your video because I was about to snap 😅 I was spray painting a cd player top cover. I followed the directions word for word and even used tips from other videos and Google. Every time I sprayed the base coat (satin black) it stayed blotchy AF! I had to re sand and prime the thing 3 times with the same blotchy outcome. Everyone said to spray “light” coats, I would do that but every time the paint would be uneven and resulted in the blotchy paint. I did what you did on this video, paint a closer heavier coat the second time around wow problem fixed! Even coat all around. Left it out on the sun all day and couldn’t be happier with the outcome.

[@adamsalchenberg779]

I’m very picky with the content I watch but this video was very helpful keep up the great work. You seem like the kind of person people want to be around.

[@javierlopezquiroz4364]

I'll try it on my '99 mustang's cobra's hood, will get back to you see how it turns out, thanks for your info! Like the experience part.

[@mrcokez1]

love your videos and knowledge, good stuff

[@JamesDguy]

a random frog Thanks I try to help explain it the best i can

[@thcyazzie9844]

Thank you brother man. That was a lot of info that I need it. Thank you💯

[@robertdiehl9003]

Excellent advice in this video.

[@swaggod226]

Another banger 👍👌💪🏾

[@JamesDguy]

SwagGod 22 Thanks!

[@BUD_Y_ZER]

I need more videos on the matte look. I need more information on the matte 2k clear ext. can it be washed at I car wash or only hand washed things of the nature. How does the clear work well afterwards.

[@craigmincey2807]

I like your how to videos keep up the good work don't think about those negative comments

[@RoyceGetit]

There’s so much videos on spray painting bumpers but this was the best one. Very helpful and easy to understand. Thanks 🤙🏼

[@nadiayvonnerazanajao7082]

Hey everyone, the greatest results that ive had was by using the Magic Painter Method (just google it) without a doubt the most helpful info i've tried

[@lacboiatl]

John deere blitz black is the ultimate spray paint if you want that look. But this video was very educational

[@shaneburke4863]

im half way done with my entire car and it looks good already after 3 cans i bought 6 so im considering if need more

[@AngelaHernandez-vh7bc]

Thank you sooooo much. God bless you!

[@malindamarieplummer8439]

I've become a bit obsessed with your videos. My bf went to trait school for auto body and told me I couldn't paint my car with rustoleum spray paint. . . Well I showed him lol. It's getting painted matte purple with a glitter fade if and when it decides to stop raining in Pennsylvania

[@JamesDguy]

MalindaMarie Plummer That’s awesome and most hate my channel because it’s not “The right way” well if you watch this channel and my Honda channel you will see I do what works idc about the road that leads me to it as long as I get there.

[@randabuffer6562]

Rattle can paint never fully hardens nor does it last long, just buy real paint and a spray gun, you will be glad you did.

[@adamzaidi1748]

@@randabuffer6562 Well they do sell legit automotive grade paint with a hardener in an aerosol can now.

[@willhopkinshopkins3270]

Good job on basics

[@russellmorrow6704]

Can I wet sand and buff Rust-Oleum flat black spray paint to get a flat even smooth surface

[@kw3674]

I’m looking to spray my bumpers and trim matte black, wondering when you would apply the matte clear coat? After 24 hours of drying? Or basically apply shortly after you spray the matte black paint? My bumpers and trim are plastic, so I will be using Rust-Oleum bumper and trim paint. Thank you in advance for any help/advise.

[@JohnDoe-wi7eb]

Can you use fill primer on bare metal? Or is self etching absolutely necessary?

[@Odenix75]

Very nice thanks

[@steveflewelling67]

Is there a difference between clear coat or like you said a matt black 2k clear

[@stevedavis1567]

Is this paint recommended for engine bays and under carriage applications?

[@fabuloso3635]

I need friends like you lol

[@joshualuissaldivar8069]

Cool, thank you

[@manuguardado91]

i tried painting a hood with matte black i sprayed it 3 to 4 times and it looks kinda shiny. how long do you wait till it ends up looking matte?

[@masondashgarcia1535]

Ima paint ma Starbucks tumbler, MA nintendo switch Matt black 🖤

[@IDJTVNetwork]

Would you recommend the Rustoleum Ultra Matte or the Rustoleum Matte Finish to paint a chevy tahoe

[@gregshore7772]

Ultra matte is what I tried only because nothing else was available at the time. Turns out I was very happy with the results.

[@timbo0755]

What up bro I have a 1997 Honda Civic CX hatchback and it's got a P0505 and tried replacing the iac valve and the code comes back after about a day or two and it's the electronic iac valve. Good job with video's and keep up the good work

[@JamesDguy]

timbo0755 You have a intake gasket leak somewhere. Spray carb cleaner around the intake manifold/injectors while the engine is running to see if there is a change in the way the vehicle runs. Spray around the throttle body as well. Hope it helps and let me know what you find

[@timbo0755]

@@JamesDguy hey what's your bro I did what you told me to and I have not found the vacuum leak yet but I haven't jack the car up to check underneath the intake to see it the idle changes but I did replace the fuel filter and that's when the check engine light came on and the car start to run rough so I revved up the engine for the a little bit and the it smooth out the idle a little bit

[@electron1012]

😮😮😮i got the same exact sander👍👍👍👍👍👍👍

[@JamesDguy]

Blazer 9 It works amazing to be honest I was shocked!

[@VWRICH23]

Rattle King 👍👍👍

[@happy04346]

I'd recommend you paint up and down on your first coat, then side to side on your last coat. Less chance of not getting everything covered.

[@rifleman7313]

I didn't even know that there was a matte black spray paint available. I kinda like blacked out cars and trucks. I like using the stick on (forgot what they are actually called) light covers that allows light to go through but if the lights aren't on just appears black light there aren't even head lights, trail lights, signal lights.

[@Jefferson66019]

So if I do the 2x Semi Gloss Black do I use Semi gloss clear or 2x Matte Clear? The 2x Satin black I tried still had more sheen/reflection in it. I saw a video of a kid doing a old 90s silverado in 2x Semi Gloss looked very good came out almost flat black but he did not add any 2x clear coat. The flatter the paint it seems the less it shows the small imperfections in the bodywork. My 2x primer I am using while I do the body work is hiding the imperfections pretty good but after I finished the fender I was working I prepped it and added the Satin Black it looked like slightly faded Gloss Black really..Should I slightly scuff the base black before I add the clear regardless or just shoot the black wait overnight and hit it with the clear or just wait a few hours then the clear?..Sorry lotta questions I am trying to do this once Thanks a Lot...Jeff

[@MORTIFICER]

I think he was talking about the 2k clear matte by spray max to give it that satin look

[@brycepeters964]

Hey ik alot of stuff you use has primer in it, if you were to spray primer what's your go to primer the use??

[@unclejohn5012]

If your using the rustoliem colors then I'd reccomend using the rustoliem primer.

[@franciscomontesdeoca5316]

Kool

[@gilbertgraham8879]

Great video thanks man

[@shaneburke4863]

i went all black so i can do the trim too without worrying about over spray or tape ruining paint

[@rikujkoivisto]

Hi! What if protect the plack paint with mat clear? I've been told, that not until clear, protect the paint..

[@JamesDguy]

Riku Koivisto Confused by the question but I’m assuming your saying something about matte clear coat? The spray max 2k matte clear will protect it from sun fading and damage. It’s good stuff you should deft clear it. But not required exactly

[@lowcc9311]

What brand 2k matte clearcoat do you recommend that keeps a good matte finish?

[@kwbalance108]

USC Spraymax Matte Clearcoat is a good option!

[@harleydaddy1967]

Where did you get that spray gun

[@VicToR_Rider]

I want to try this on my 2002 mustang. How many cans of 2x matte blue would you recommend?

[@b16ajack]

It all depends on how many coats you want, id recommended 2 or 3. Maybe 14 2x matte blues And id primer it aswell. So 6 primer cans. And take your time on prep work

[@johnlawful2272]

@@b16ajack I'd primer?

[@lionking8804]

👍

[@markprice2225]

I would suggest that if you are doing this for your 1st time that you should do 3 light coats instead of 2 like in the video. Prevents any chance of Runs or build up, prep is 🔑 too

[@carr2oman103]

👍👌

[@Luckky-13]

Is this ultra matte black a deep jet black? Thinking about using this black on my chevy with the 2K clear.

[@JamesDguy]

LUCKY13 ! It could be 🤷🏻‍♂️ I know with 2k matte clear over it the paint looks amazing. Haven’t gloss clear coated a matte black fender yet though

[@Luckky-13]

@@JamesDguy i think the ultra matte black and 2K gloss clear on top will look amazing!!

[@LD-xg5gw]

Wouldn't gloss 2k on top of matte just end up being glossy? I have black 2x primer on half my truck right now, and kinda loving the look, but already bought the 2k gloss.

[@teejay9429]

Where'd you get the primer + paint tho? I'm trying to get blue.

[@higherwrldsprodction2955]

any home decor or hardware store really

[@tomc8829]

I like how the music was acknowledged.

[@drexelbeckman9519]

Should I prime before or after adding the paint?

[@johnnyisahermit]

it "primes the surface... primer isnt clear and would cover all the color you were going for.

[@mattburke5356]

Nice! How about painting over a chrome bumper

[@johnsolow3944]

I did this on my ford f150 if you sand the chrome with 180 then wetsand it after it holds paint pretty well it stayed on my truck for over a year no issues until I sold it

[@stonedthought]

Thx for the tips dude.

[@wunderbread5019]

I wanna learn how to paint a car two different colors like bottom half of a fender black and top of the fender white, have you done a vid like that or consider doing it? Edit I’ll send a link to photos on what I’m talking about if you want.

[@JamesDguy]

I get what you are saying. I might have some spare junk fenders i can try to do a video on.

[@wunderbread5019]

Moore Motorsports James Dguy thanks a lot man can’t wait to see it if you get to it

[@stics412]

I used 320 and it shows sanding scratches after paint! How can remove the scratches would the spray max clear coat hide them?

[@JamesDguy]

steelers412 I didn’t even show sand scratches through with 220 and typically do. I think it’s because I put the coats on thicker applying 2 decent coats covered them. You can also prime before the color which usually fills in sand scratches. I have never had 320 show scratches even with a thinner coat of paint on there. I’m just assuming the coats weren’t thick enough. My only thoughts

[@julianpr]

Use 400 then paint

[@julianpr]

You don't going to have any scratches using 400 grit. Then paint.

[@stics412]

Thanks guys I’ll give a try!

[@R333nuh]

I did a matte 2k clear and its havjng these milky white spots what do i do

[@juggnautbitch]

paint when there's less humidity.

[@el6750]

I know this is 2 years ago but are you supposed to wet sand or??

[@tommychism3904]

I'm wondering the same thing

[@luisenriquez9194]

Wet sanding is only required for 400 and up

[@TheBeastKane]

Follow Paint Society, you don't ever have to wet sand.

[@justingarza347]

A bro can you do a video where you sand the 2k clear to get orange peel out then buff it out with maguires compound to show whether it would take out all the orange peel but still have the shine

[@JamesDguy]

Justin Garza Already have one it’s the pink crv. I have playlist made up already.

[@justingarza347]

@@JamesDguy yeah bro I actually found it after I messaged you appreciate and thanks video helped me understand the last step

[@chrisbishop6658]

Would you recommend using the fan tip from the 2k clear cans on a rustoleum can or no?

[@JamesDguy]

chris bishop You can’t. I have tried to they don’t work but if your could find a way to adapt then hell ya!

[@trentmartin4140]

Moore Motorsports James Dguy when you wet sanded and polished your wife’s CRV, how long of a process was that? How long would you recommend waiting after spraying on the 2k clear to wet sand?

[@thonyperez2040]

How many spray can did you use

[@grabacr1251]

How does it hold up to fading ?

[@JamesDguy]

Bryan Mena If there isn’t any clear it lasts about a year before fading noticeably. I would recommend 2k spray max clear over it. They sell the matte clear. The 2X clear isn’t that good but it’s also a option.

[@bryansage6925]

Have you ever tried any graffiti fatcaps on rustoleum can to spray a car?

[@gimmeat0wel]

Bryan Sage ArtPrimo got em

[@bryansage6925]

@@gimmeat0wel yea I got a 10 pack...

[@gimmeat0wel]

Lmk which one runs great on a rusto

[@bryansage6925]

@@gimmeat0wel I got the rusto fatcap thats made for rustoleum male valve spray paint. The spray pattern is like 4 inches wide so no strips...

[@sikk84mcss]

Bryan Sage i’ve used caligraphy caps,worked good.what have you use,Fatcap?

[@bsvv252]

If i wanna paint a whole normal sized 2 door car much do you think it would cost me?

[@zacjohnson8404]

I just did my car, small 4 door wagon (toyota alltrac 4x4) and it took 12 cans. How-ever, 2 of the cans were primer and sprayed on like nothing, should have just had all 2x paint. And I also did it in light to medium wind. So in ideal conditions I think you could get away with 10. But do 12 anyway, when the paint is thick it looks way better than just a couple coats.

[@mjmsaa]

Zac Johnson do you need to 320 sand the entire car before painting??

[@slow_rednline4874]

@@mjmsaa yes .why would you only sand parts of it

[@bsvv252]

Whyd u say put yhe wax remover on before u sand but u put it on after sanding?

[@gregshore7772]

Wax remover first if not it will be harder to sand. Wipe down the sanded area with a tack cloth or if don't have a tack cloth Wipe it down with windex and let it evaporate. You should be good to go

[@tonymcpherson1958]

So you don't sand dirt, oil, greade and things like that in to the paint.

[@oOKINGCOLEOo]

I see you do dark colors but can you do a white? I wanted to do matte white for my truck.

[@JamesDguy]

King Panda I need to do a matte white paint. I do light colors best!

[@oOKINGCOLEOo]

@@JamesDguy Ok thanks

[@apbeatz3881]

Yes my Yukon is white with black racing.strips.lol

[@elsey1976]

Did you post a poll about doing a yellow color or am I going insane? I thought sure I saw that on your channel a couple days ago.

[@JamesDguy]

ed elsey I didn’t do a poll just asked what people thought. We have pretty much thought about it and it’s going yellow. I will have video of the entire process

[@elsey1976]

@@JamesDguy awesome. Love the channel! We appreciate your time and effort!

[@DigaPrints]

Just my opinion, but when I first bought my black & Decker sander, Walmart sold their sandpaper too. But when they switched to the off brand stuff your using in your video, I found it didn't work at all. I found buying the sandpaper from home depot or Lowes works way better. Most smaller hardware storage all carry that type of sandpaper (even in pro versions) but they are all the same level of just-dont-work.

[@JamesDguy]

Diga Prints Your Right 100% the gator brand sand paper don’t work very well but it was all that was open at midnight when I did a project awhile back and it’s all I had left over but it worked for what i needed it for. I usually get the large packs from Home Depot that have the red colored sanding pads.

[@staceylynn8110]

How many cans would it take to a jeep liberty?

[@JamesDguy]

Stacey Lynn I usually go 8-9cans and if you have left over you can take it back.

[@staceylynn8110]

@@JamesDguy ok and thank you

[@CarlosLopez-zt6th]

where did u buy the paint?

[@JamesDguy]

Carlos Lopez Walmart

[@japmuscle3688]

1st

[@trentmartin4140]

Is rattle can painting a vehicle a multiple day process,?

[@JamesDguy]

Trent Martin It don’t have to be. If you do what I did when I painted my g35 lime green it only takes a few hours. Then you let it dry over night for best results

[@Delfi1900]

Trent Martin only drawback with using rattle cans is that the sun will fade your paint job within a few weeks, it will not last very long.... ):

[@mikewood3528]

FelixD cat Can you defend that opinion with verifiable data? Or, are you implying the “rattle can paint” is somehow not “actual paint”? The pigment in rattle cans is exactly the same as “gun paint”. The carrier is the same. The air supply is still compressed, though it contains a propellant. But, it IS paint. The differences lie in the type of paint. He is spraying enamel...not base/clear (“two stage”). Enamel does not endure UV well, unless it is baked. Air drying is the weakness. However, if you use a product like Eastwood’s 2K “rattle cans”, you are shooting two stage. You can get enamel with a hardener, meant for air drying. Or, you can get genuine two stage base/clear. But, if you compare apples to apples, there is no reason why you can’t spray rattle cans and get good endurance and UV resistance.

[@pxndxlunx5821]

@@Delfi1900 must not be doing it right if that's the case.

[@johnsolow3944]

@@Delfi1900 that's not true at all not even close to it what paint are you using most def not rustoleum

[@davidkeegan7929]

How many cans would it take tk cover a car?

[@OGgod420official]

$120 worth of cans get krylon satin black or matte best cans for paint just prep before.

[@OGgod420official]

They’re also paint and primer

[@savahnian]

Does this work on rust?

[@mrsseasea]

you can buy a rust resistant paint. It is paintable,

[@TheMinishKid]

Looks like “Batmobile Black”

[@JamesDguy]

A Palmer Right! Once I get money I will be doing the engine bay and it’s gonna be so amazing. Been struggling since the move to Texas but we spent 6k moving here so we are broke broke

[@aurokris4182]

How do I change my bikes side panels which is glossy black metal to look matte finish kind of like carbon fibre. There's no video on gloss metal to matte finish videos on KZbin 😢

[@JamesDguy]

Auro kris make it look like carbon fiber or just a matte black finish?

[@aurokris4182]

Not sure about both of those.. Glossy finish is tough to maintain and scratches so I thought matte would be better looking as well as solve the scratches problem

[@JamesDguy]

Auro kris You can see scratches still in matte/flat or gloss my solution was bed lining lol I literally bed liner many vehicles it looks good and very durable which I have videos on here of me doing.If you go matte black it looks very good I just recommend a 2k matte clear and it would be in my opinion perfect.

[@TheBaccaClench]

How’s the paint on the rest of the civic?

[@JamesDguy]

SwagSubscriber It’s garbage. I am going to be repainting it all Gloss yellow and will have video of the whole thing. This is just a spare fender

[@TheBaccaClench]

@@JamesDguy Oh yes, please record and post updates!

[@ItsTheFry]

#MattLikeDGuy

[@JamesDguy]

Fry Always 😎😁

[@DCopp]

What's a hell dent? 🤪

[@ertai222]

It's when a demon punches your vehicle

[@grenudo.]

Hahahha good one man

[@mbenderF7]

Is it safe to wax over this?

[@JamesDguy]

mbenderF7 I never had a issue waxing over it. That’s one way I kept my spray jobs nice so Long

[@johnbeer5242]

Moore Motorsports James Dguy nice sportsmotor Moore dguy James 👏👏👏👏👍🍻🏌🏌🏌🏌😀😀👏😀😀👏😀👏🍻👍👍✌😀

[@79cobra13]

I bought 3 cans of the flat black it's literally the worst can of paint I've ever used it was really textured like it had dirt in it and half came out flat and half came out glossy took hours to sand that garbage off I'll stick to 97 cent walmart black primer

[@Lucciii32]

Try matte black I can assure you there will be no gloss

[@gregshore7772]

I recommend you try matte clear coat. Do a very thin mist coat and then a couple of more very thin coats because the matte dries really fast. By the time you put on a coat on your door, you should be able to apply a coat on the fender.

[@markprice2225]

Had similar experience with the flat black, bumpy af, and blotchy and you weren't sure if you should keep going or stop. Matte Black ultra is night and day trust me, prep matters too

[@Egodeath707]

Your supposed to purge the can and clear the buildup inside it first. He literally said that In the video

[@AFrame88]

Matte 2k clear coat? What’s 2k?

[@tandptwins]

2k is a 2 part paint that comes in an aerosol can if needed. You activate the hardener like they shoot at a body shop. About 30.00 a can Look up Eastwood paint

[@y.g.smokedog3233]

You got a IG

[@leonidaskalivas4562]

Try matt white please I'm interested

[@orlandovillalba6157]

why do i have stripes on my paint job? how do i fix or avoid stripes for future projects

[@tomc8829]

Not wet enough.

[@Florida_man21]

Spray further away

[@shaneburke4863]

more coats and too close wind is bad as well just between 10 and 12 inch away go light and repeat so no drips ir stripes stripesvis to close drips too close and too much or car wet before or after before its dry

[@Hanz84Gaming]

Damn I wanna do my car so bad I'm scared I'm gonna screw it up.

[@JamesDguy]

Hansel showcase84 One thing I learned is you can always wet sand it and re do it if so. Best learning experience you can get is actually trying :)

[@elsey1976]

Go buy a fender or a hood or something from a junkyard or CL. That's my plan

[@LD-xg5gw]

Or plastidip it...

[@marcivenus4591]

@@LD-xg5gw how long does plastidip last?

[@bbear88]

That thing shot like a bullet from your war hawk haha

[@kennethhudson8013]

I would use primer

[@tonymcpherson1958]

Wasteful. Not needed if it's not down to bare metal.

[@monkeyfoot5377]

That first coat was absolutely thick …like wtf 💀💀💀

[@tommysambrano6623]

Ok so why didn’t you primer it before painting ?

[@cognac8297]

Primer is for rust. If your panel is soft and not past factory primer your good.... But I like your question because they told me what I told you. I did this yesterday doing my car matte blue. Without primer you won't see all the bad spots you can fix with glaze puddy before paint after primer.. primer will show what your paint will look like. And dents and shit you can't even seewithout primer

[@texaskingcycles5322]

Because the paint he used was paint +primer

[@tonymcpherson1958]

No need to if no bare metal is showing.

[@tonymcpherson1958]

@cognac8297 primer isn't for rust. It's to help paint stick (mainly on bare metal), fill very fine scratches. Primer is flat so it doesn't really help you see spots to fix. If used as a guide coat for sanding it can.

[@ruskibruski]

Monetize your videos for that ad revenue because I heard you moved recently to... Texas?

[@JamesDguy]

That's how i pay my rent lol I make averaging 1K+ a month off my youtube so its basically my full time job aside from being a dad of 4 lol. But yes live near killeen texas

[@ruskibruski]

Moore Motorsports James Dguy yikes

[@mikep3322]

@@JamesDguy paint my car I live in round rock I'll pay

[@user-bl8bn4kb8m]

My hand got sore..

[@JoeSmith-rb9mq]

Matt black never looked good

[@JamesDguy]

d j It does on the right car. I would say the Datsun 240/260 looks amazing because the curves of the car

[@nelsyquintero8323]

Wow, look how inflation is crazy high right now, that same bottle of paint is going for $7 now in 2024.

[@ryanl3184]

$3 can of paint! LOL! Try $7... Let's go Brandon!

[@Shiznit304]

$6.48 at my walmart

[@artsyfartsystuff4277]

no I bought 12 cans and they are $4.00 and change.

[@ryanl3184]

@@artsyfartsystuff4277 where do you live? DC area they are 7!

[@SourFoo]

companies taking advantage of you, not the president 💀💀

[@sgzmn2803]

@Ryan L lmao gullible peasant

[@PhaseSkater]

glossiedt matte black ever lol

[@unkelartgarf3792]

Not at the end it wasn't. Guess you have a short attention span and bailed after 3 mins lol

[@WHITEPERSUAS1ON]

Bro, it has to dry

[@manuguardado91]

@@unkelartgarf3792 so i guess he said it needed about 24 hrs to sry evenly and give it that matte finish right?