Teande SMART PRESSURE WASHER with Digital Display Review | 3800psi and 2.8gpm Pressure Washer Review

[@bobkeller8383]

All these power washer reviews are great. Love how we find out what the true psi and gpm are but I wonder about quality and longevity. That's the big and equally important answer we are missing.

[@bryanlorenzo6202]

Just got this pressure washer today for 70$ brand new, and after seeing the video I know for the price it will do the job. Great review !!

[@Knotskip]

How has it held up

[@ryanburke9655]

Man these videos are great!! By far the best on KZbin!!

[@imjoshv]

THANK YOU!!

[@chrizzis77]

Purchased several things from your Amazon links. Thanks for all the reviews. 👍

[@imjoshv]

Thanks!!

[@descobertadacena2022]

Put the gauge in the end where you connect the noozle

[@imjoshv]

that connection point is 1/4 but the gauges are 3/8

[@j.s3591]

You should get an attachments or figure out a way to connect the PSI gauge, that's one of the reasons many people tune in to see if the pressure washers put the numbers they say!

[@ddautodetailing]

Another good review! It's great that you're reviewing a wide range of them.

[@imjoshv]

Thanks so much

[@wisheduknew294]

@@imjoshv So why do they put such a high psi rating on it if it would never achieve it? I’m looking for something that would clean concrete lickety-split very easily. Might as well just go with a 16 to 1800 psi?

[@crisworkizer]

I think that after everyone has reviewed your vids. Which are spot on. Should no by now you not going to get the reccomend PSI or GPM especiall on an electric pressur washer. You don't need a ton of PSI or GPM to wash a car. Josh has proved this with a budget line $99.00 Ryobe at Home Depot. Buy the budget pressure washer and upgrade your parts. Josh thanks for sharing.

[@10SecondZ06]

I love all your videos but I’d love to see you use them to clean concrete as a comparison of the different orifice nozzles. I have mine setup with the hose, quick connectors, short gun, foam cannon with 1.1 orifice, all from your inks. I even bought the same gauge from your link. I’m pretty setup now. I also have the standard gun with wand and 1/4 quick connector on the end for all cleaning tasks other than cars, like sidewalks. I’m curious for you to test standard wands with different fittings. Test the different degrees for their tasks and then ones with a smaller orifice of the connector. See how much different the orifice makes for cleaning and which size is best for the electric power washers like how we now know to use the 1.1 in the foam cannon. Would be great video. Thanks

[@errolhowland4013]

Can you not plug pressure gauge in just before tip, then plug in tip? Would love long term feedback on some of the units you use. Obviously ones like this Only get used once or twice. but the ones you have used daily for years etc. Like the craftsman, the dewalt (maybe) and the ryobi?

[@imjoshv]

that connection point is 1/4 but the gauges are 3/8

[@davestewart9146]

I would pass up on this one, thanks Josh 👍😁

[@imjoshv]

You and me both!

[@Jeffc288]

Can I use a smaller gun for this thing? Or does the smaller outlet of the hose restrict me from using others?

[@toddolatheks.1328]

Isn’t the main reason you rate the PSI is for safety???? Awesome video great production. Thanks 🙏

[@huhSHUA]

I have this same pressure washer and idk what happened but my nozzle doesn’t shut off anymore. It’s always on regardless if I squeeze the trigger or not. Any way to fix this??

[@stchan0813]

Why dont you buy a 1/4 quik connect inline pressure gauge? You will measure P4 (pressure at nozzle tip) wich is the most real?

[@imjoshv]

the one is use is from MTM and its the most accurate ive found.. They dont have a 1/4 option... I can look into trying to change the fitting

[@PREDATOR07]

The outside light kills the vision. Lighting is a key feature when taking pictures or videos.

[@Whatamanpig]

Have you tested the jet USA 550 it is claiming 3800 aswell can you let me know 🙂. Overall is the green works 3000 Psi the most powerful? That actually almost get to the pressure it says

[@superduper476]

What mobile pressure washer with a reel, and wheels, do you recommend please???

[@OpticDetailingKY]

Have you had a chance to check out or even do/want a review on Adams newer premium foam cannon?

[@imjoshv]

I will be soon!

[@OpticDetailingKY]

@@imjoshv looking forward to it!

[@chrisroyster4601]

Will the uberflex fit ?

[@mikey_qfitty]

can you change the gun on these or theres no attachment for it?

[@calvintynes1879]

Hey Josh, can you do a review of the Suyncull Pressure Washer 3800 PSI?

[@imjoshv]

I can look into it! It looks like its gonna be the same story... no way oit gets 3800psi

[@dtna]

Can you do a video on you you properly use a pressure washer on your cars and wheels? Thank you.

[@imjoshv]

yeah im planning on doing a full how to wash video soon

[@deonpalmer4965]

Hey any chance you would be doing a review on the wen electric pressure washer. Just curious

[@imjoshv]

i will look into it!! Thanks

[@bshraven]

Wonder how it would perform with that ryobi nozzle.

[@45ACPSpi]

Can you put the pressure gauge between the end of the nozzle and the tip?

[@imjoshv]

I wish. The gauge is 3/8 and the nozzle and rips are 1/4

[@rehanhasan1560]

I just wonder where do these claim numbers come from? I mean they are just crazy enough sitting on that paper

[@imjoshv]

Its the person listing it on amazon. They think the higher the number the better to get sales..

[@deonpalmer4965]

Hey Josh I’d love to see a review on the SIMPSON 1500-PSI 2-GPM Cold Water Electric Pressure Washer #IR61094 I’m interested to know the true specs on in that one. It sure seems like it would be a great pressure washer for detailers. The build quality looks amazing. I’ve looked all over for any review on it and haven’t seen one yet

[@imjoshv]

Very interesting! Those specs look similar to the adams pro series that i have a video coming with on saturday. Ill try and get the simpson ordered, it looks like it could be a great unit!

[@grantthomas9027]

Gday mate I’m looking to buy Jet-USA TX870 Gen IV Commercial Trade Petrol-Powered High Pressure Cleaner Washer but I not see anyone review any of jet-USA machines do you know anything about them ? Thanks 🙏 Ps I do know that there made in China lol under strict supervision lol 😂 Any info would be greatly appreciated

[@Ryan_H22]

Hi. What is your intended use? The unit your talking about looks like a very nice machine, Annovi Reverberi pump, etc, but it's way overkill for car detailing. On average we're looking for 1.8 to 2.0 GPM at 900 to 1,000 PSI. That machine is rated at almost 4 GPM and a continual pressure of over 4,200 PSI. Sorry but most of us watching these vids aren't looking for that much machine to wash a car. You don't want to blow the paint off, LOL! Could you use it? Sure, with a large enough nozzle. A quick chart check says an 8 or 8.5 size nozzle would get it down to about 1,000 PSI and 8 GPM.

[@imjoshv]

Hey Grant, Im sorry man i dont have any info on those!

[@simasm.9757]

thanks for your hose reviews going to buy the uberflex

[@imjoshv]

Anytime!

[@landonme9614]

Try the giraffe pressure washer on amazon

[@definitelyduse]

Isn’t 2.8 gpm low???

[@chorezap]

Is this almost or as good as the Active VE52?

[@josephlynn85]

Highly doubt it

[@imjoshv]

No, The active is much better

[@kirbyschneider4187]

Maybe they meant Liters?

[@1stfrompuertorico568]

2nd

[@TOML0856]

what no decibel readings on this one ?

[@imjoshv]

Sorry Tom, with the bad hose and gun I didn’t even think about it. It didn’t sound any louder than the others though. I would guess 80decibels

[@TOML0856]

@@imjoshv THANKS as always great video

[@FredShramovich]

1st!

[@inkgenie9760]

👍👍

[@imjoshv]

thumbs up!!

[@josephlynn85]

They probably have those jacked up connections on purpose so it’s harder to test hahha

[@inkgenie9760]

Hah right!

[@imjoshv]

exactly haha

[@muzaffartukhtayev6846]

Sir, install pressure gauge to the tip of the gun to measure psi.

[@Jeeper1378]

Its a 1/4 connection

[@imjoshv]

exactly, the tip is 1/4 and the gauges are 3/8

[@tyreeseross3301]

Raw 🦴

[@AverageReviewsYT]

Wth no pressure test?

[@Jeeper1378]

Not with its 1/4 Connection

[@AverageReviewsYT]

@@Jeeper1378 all the others ones he tested were 1/4

[@imjoshv]

the other ones are 3/8 inch... the 1/4 is typically only on the nozzle. Since i couldnt change the hose i couldnt hook up the gauge unfortunately

[@AverageReviewsYT]

@@imjoshv ah

[@RichardGerard]

Year update.. Not rated well.. Not available anymore

[@RelentlessMocha]

Wish they would tighten up that false advertising.

[@Guessandwin3d]

Man, test the PSI with the smallest tip and put your hand in front of that one. I think then, you’ll see the 3.8k

[@vinceriggio72]

You're too easy on CCP stuff (Cheap China Products)

[@imjoshv]

haha, i dont want to make anyone who may already have bought it feel bad