PCV Valve Replacement for VW/ Audi 2.0T TSI DIY (How to replace)

[@highspeed294]

This video went up 7 yrs ago and helped me replace mine in 2022. Great tutorial easy and simple !

[@AngeloShabazzX]

How's it going.is it still working

[@highspeed294]

@@AngeloShabazzX changed it out 4 months ago and still no problem easy cheap fix!

[@BasicBeachCommunity1]

@@highspeed294What did it do? Mine is not idle right...

[@jeffcruz1008]

Did you get a P2187 code?

[@highspeed294]

@@jeffcruz1008 nope sure didn’t

[@FirstImpressionReviews]

I would suggest covering the spark plug holes with plastic so oil doesnt leak in there when removing the pcv valve. I would also suggest using an air can to blast any dust laying around the pcv valve before removing it too

[@EazyDuz18]

no

[@kimberlyjohnson2795]

Never saw an engine so clean...

[@99lodgey]

Try visiting a new car dealer at some point in ya life 😬😂

[@sonnymendoza9654]

Go inspect a 300k miles camry. Your jaw would drop

[@tristangehman9236]

Thanks for the tutorial. I ordered a replacement today. Between you and Humble Mechanic, I was able to diagnose the issue (my hunch was right) and limp 200 miles home knowing it was just the PCV shreaking loudly. I pulled the gasket from the oil cap to equalize the crank case pressure enough to make the squealing stop.

[@theunforgivin123]

I thank you so much for this tutorial! It's super simple on hind sight, but finding the origin of the problem was hard... I replaced the part and took apart the old one.. and what do you know.. the rubber on the inside had a big gap.. i was glad I replaced the part in time before the rear seal would have blown! Thank you so much!

[@TheCoatneyadkins]

Which rear seal blows out when you don't replace the pcv in time? The rear crank sseal? ???!!!

[@thesolojourney8955]

2010 GTI here, parts I have replaced so far are -Front 02 Sensor -Diverter valve -PCV Valve

[@__Natur222]

When your pcv valve went bad was your exhaust burning oil?!?! I have a 2009 tsi gti and at idle in the cold it burns oil like a lot of white smoke and idk if it’s the pcv valve or what

[@ffspmsl]

Thanks for the vid, just an FYI for anyone looking to purchase a new pcv, the current revision now is “AH”....

[@armando19]

Thank you Paul! This is exactly what was wrong in my GTI. I ordered the part from your site and it arrived today. Very easy fix, I installed it this morning and tested the car. Good as new!!

[@opi2802]

What problem did it fix for you?

[@sonjavanstaden520]

hi there my GTI 7 pcv is faulty so when i come off throttle car has gray smoke is this a symptom of faulty pcv valve?

[@jernigan007]

I had a lean code forever. I thought it was my downpipe or O2 sensor. Car drove fine. . . . It was the PCV...

[@Deutscheautoparts]

- We appreciate your Support and Purchases! Genuine VW/Audi 2.0t TSI PCV Valve www.shopdap.com/tsi-pcv-valve-06h103495ac-1.html Cheaper Alternative 2.0t TSI PCV Valve www.shopdap.com/06h103495ac-pcv-valve-assembly-for-2-0t-tsi-engine-prexa.html

[@junior_v22]

What’s the difference between the cheaper one and the more expensive one ? This is For a 2012 gti ?

[@speedyvedo99]

To anyone looking for answers, if your car is idling weird and misfiring, this is probably your problem. It fixed mine. 2011 Volkswagen CC 2.0t.

[@garbyjoseph2827]

i have the same problem you mencion there

[@cakeisgrose]

I’m gonna fix mine tomorrow 🥰

[@gixxerk16]

I have just changed mine, thanks to this video, it only took me 20 minutes all in. Genuine part was £110 total. Excellent video. Thank you.

[@shawnapurdy5494]

Thank you so much for this video! With minimal self engine repair experience, I was able to replace the CVV on my 2010 GTI last night! Its running so much better! Thanks again :)

[@yannzter]

While a girl who owns the a GTI MK6 2010 like me and actually replaces her own PCB valve is probably the most beautiful thing in the world cheers

[@kamelberdja8736]

Epc allume ??

[@jamesjohnson3910]

Can you clean the original pcv assembly and reinstall while waiting for the new one?

[@wonsliqsunofabitch]

After having misfires in cylinders 1 & 3, I replaced all spark plugs and ignition coils. The misfire code hasn't cleared itself and seems rough when I start it up. I pulled the spark plugs a day after installing new ones to find the engine is running rich. Is the next step the PCV valve? ***UPDATE*** - Got a diagnosis done and it confirmed my hunch. The VW dealer determined that the PCV valve was leaking and there was significant carbon build up inside the intake manifold. All of this I expected. What I didn't expect was they found oil leaks on the upper and lower timing chain covers...which they suggested should be replaced. As well as a leak at the rear main seal. So this leads me to my new set of questions. Wouldn't the PCV cause oil leaks in all of these places? Why replace the whole cover instead of just the gasket? I'm not mechanically inclined enough to do the timing chain repairs and would have those done at the dealer, but I'm trying to mitigate cost here and do only what needs to be done. Also, with the engine having 120k miles would it be a good idea to go ahead and replace the timing chain? Or should I just not try and fix what isn't broken? Thanks!

[@MichaelStanton]

Probably useless for you, but for those reading this, for my CC I did exactly what this guy did and then followed up with a PCV Valve and my rich problem went away.

[@buildingwiththebabcocks8674]

wonsliqsunofabit

[@tenbob8824]

Very good video... clear and concise. However there is a tightening sequence for these small bolts and a torque value of 11Nm. Unfortunately at time of writing i cant upload the picture that shows the tightening sequence. Sorry...

[@mariogonzalez8825]

Question: I had my PCV valve replaced less than 2 yrs ago nd now it is failing again, my idle is raving high and low and when I took a look at the engine there's a lot of oil coming out near the back of the engine block, just as you mention on your video. Is this common for it top fail in less than 50K miles?

[@MichaelStanton]

I don't know if you know but there's a newer version of it that this video doesn't mention for the VW CC. Try the newest revision.

[@swcblad9519]

what is the torque spec for those screws of pcv?

[@wizerulz]

Why can’t you just replace the diaphragm spring and the little orange stopper plug? It’s only $30 vs $100+ for the plastic housing

[@philm5380]

Awesome! I just had this go bad on my 09 B8 A4 quattro 2.0T (FSI). Symptoms: High pitch whistle coming from the front of the engine (dipstick plug location) at idle after driving. Strong neg. pressure pull when trying to remove oil cap with engine idling. (*Edit: I used a different part number for my model - 06H103495AE… I'm still not 100% sure that this is the right part. I may need to replace the crankcase seal. I highly recommend calling the dealer or experts and using your VIN to find the right part.*) Install procedure is the same except there's an additional bolt holding the coil connector line in place. The valve is right on top of the engine (easy access ~ 30 min job.) Great video! I would caution anyone about buying aftermarket parts for this one. Based on my research it's been linked to the oil consumption issue and if the part has been through multiple revisions it's probably safest to get the latest OEM. Make sure it's the right part though. Edit: Replacing this part has made a HUGE difference. When idle I can't even tell if the car is on. It was quite rough before. The performance has improved and the whistle is long gone.

[@Deutscheautoparts]

Awesome... Thank you so much for the feedback. We appreciate it very much.

[@philm5380]

Deutsche Auto Parts- Your Source for Everything VW and Audi I did some more research and my original number is 06H-103-495J so does that mean that the latest revision of my part is actually 06H-103-495AE and not the AC? *Edit:* Yes - confirmed 06H-103-495AE is correct number for my B8 A4 Quattro 2.0T (FSI). But I would recommend calling and confirming with VIN.

[@Deutscheautoparts]

please send your vin and we will check which is the correct part for your vehicle.

[@philm5380]

Deutsche Auto Parts- Your Source for Everything VW and Audi I'll remember that for next time… I misread the description and thought this was for the TFSI so I ordered it and installed it. Obviously, as soon as I started the car the MIL came on and then I realized it was the wrong part. I needed the 06H103495AE. Since I installed it I'm assuming I can't return it so it's going up on eBay. I couldn't wait so I went to the dealer for the correct part. Thanks for all the help though. Next time I'll be smarter. There's no way you would accept it as a return is there? I only ran the car long enough to drive around the block (

[@morodpour]

Phil Morris v

[@Jacob-wz7jf]

Hi there, really helpful video! unfortunately after replacing mine my car is now idling really badly. I thought it was the part so i got a replacement and it’s still doing the same thing. When i put the old valve on it runs fine. Do you know why?

[@dameonneary9628]

My Audis been running tough for about 8 months now with a low boost code, mechanic told me off valve is bad could that solve the low boost?

[@dnkomos1]

is this the part that causes high oil consumption on my 2011 audi avant wagon a4 2.o?

[@Iamtherealsun]

Don no those are the valves and ring seals that are too small letting oil bypass the cylinders and burning thru te exhaust.

[@jatinshetty]

you need more camera angles man

[@chaserzr1251]

If you can’t get the jist of this swap...then you shouldn’t be working on cars.

[@kameronfalls742]

Ivan Chassed or maybe you don’t want to get charged 300 for something that cost 50. Just saying.

[@harryberry474]

@@kameronfalls742 ...$50 ? Try $168 for the PVC...Where did you get $50 from?

[@muhammadmasterminders]

@@harryberry474 Check Amazon bro! They even come with the hose!

[@Espadazorz]

No need for specific torque specs?

[@mosesg.5359]

I just replaced my valve and realised that the previous valve was aftermarket Vaico brand and had been replaced less than 2 years ago, about 25K miles. I was getting different check engine codes from faulty O2 sensors and also faulty catalytic converter. Once I replaced the valve with a VW/ Audi from the stealership the codes went away in less than 5 seconds after the valve was replaced. Paying the extra price at the stealership may give you peace of mind and not having to replace within 25 K miles. Also, the previous valve was leaking quite a lot of oil due to the gasket having gone bonkers! No more Vaico aftermarket for my MV.

[@davidharris5463]

Just a quick question, What trorque setting should the PCV bolts be Torqued to? And please dont answer hand tight.

[@yeahyeah8358]

2012 audi s line 2.0tfsi. Obvious oil in #1 cylinder. Which is causing a misfire. And throws the misfire code. Buy what I was wondering is. Wouldn't the pcv/oil seperator cause the excess oil buildup in the cylinder ? It's only on #1 cylinder. I already changed out one coil pack to see if it changed or ran better in which it did. But eventually misfires again. When I clean the plug it starts all over. Would the pcv/oil seperator cause the excessive oil buildup ? It's smokes only in that cylinder.

[@bovcrx]

I have a same issue in a 2012 beetle. Cyl 1 and 4. Did you change your PCV, and did it fix it? I cleaned my coils and spark plugs and mine runs for now. Just waiting for it to misfire again.

[@bovcrx]

If you have some oil in spark plug well, is it too late to change this? Will changing this help it not seep anymore in the spark plug well?

[@kdukowski]

Now try doing this when its 10F outside and a blizzard, thats my current dilemma 🙃💀

[@SalvadorSTMZ]

Why are there two hoses connected to the PCV Valve? One that connects to the intake manifold and the other to the air intake. But why?

[@TommyPrey]

Could you tell me what is the Torque spec for the nuts? I saw 8 pound foot for them.

[@swag1040]

This fixed my issue with P3000 & P3003. I purchase the blue driver scanner and let me tell you. It was a good investment. Tells you the top two issues for the car. Thanks! For this video! Also I had already replaced the 4 ignition coils and spark plugs.

[@TassieLorenzo]

10 years ago Paul is not very sarcastic. It's so strange! 🤯

[@stevewilson7857]

VW dealer quoted me almost $700.00. Outrageous.

[@spawntaneous1903]

Just fixed mine for $50

[@matttunbridge5525]

What torque should the bolts be tightened to when re-fitting the new PCV? Thanks

[@pally21]

I need to know this too??

[@chrisj5144]

11 Nm

[@dinaziemian7735]

Thank you so much! Worked like a charm. Only took me about 30 minutes to do by myself.

[@Z0H0S]

Excellent tutorial. I was able to easily replace the part on my 09 Eos. Thank you.

[@Deutscheautoparts]

Zach Southerland No problem glad we could help. Please consider us next time you are in need of parts.

[@allendafamily6089]

Just replaced on my VW CC so far no more CEL! Thanks for this video

[@gilbertm8923]

Has it given you any problems since replacing?

[@Cleanentertainment469]

Hello, question.. I have a nice oil leak coming from somewhere and I've thought about replacing the pcv valve. I haven't done so because every video I see about failures of pcv you're suppose to get codes or some kind of symptoms. I have no symptoms or vacuum from dip stick, car runs smooth. I have thought it's a rear main seal leak but since pcv hasn't failed( to my knowledge) where else can I check for leaks. Side note as well, car leaks just sitting as well which also leads me to believe its main seal. Any ideas on this?

[@Deutscheautoparts]

The rear main can fail on its own. It's just often caused to fail prematurely after a pcv failure. Sounds like you might have a bad rear main, but a second opinion is in order.

[@Cleanentertainment469]

Deutsche Auto Parts - sounds like I be getting a pcv and main seal fixed, I was afraid of that. Thanks for your time, also once this is fixed I'll be ordering your stage 1+ ecu/dsg flash, main seal kinda put that back.

[@Cleanentertainment469]

Deutsche Auto Parts I installed a new pcv valve before getting main seal repaired. Installed it and now have check engine light, will be getting the code read but from researching everything suggest pcv valve is stuck open. Idle is normal, when I open oil cap when car is on it doesn't stutter like before. Thoughts?

[@gpaje]

Thank you for making this video, it made changing my PCV and fixing my P2187 code super easy.

[@Deutscheautoparts]

gpaje Awesome. Glad it was helpful

[@scotthancock6764]

Is it normal for battle to die when you remove the oil dipstick with the engine running?

[@Thelightinthedarkness78]

Ever see a oil pan Crack due to crank case pressure from one of these. Brand new oil pan.

[@David-C27]

Will this cause car to turn off at low rpms? Like when parking or at a drive thru

[@RevelsCat]

Just had PCV valve (06K103495BL) replaced 2014 A4 TFSI. It didn`t fail but engine has 100,000 miles on it so probably a good idea to get it done. Thanks for posting this video.

[@teocan10]

It is called planned preventative maintenance. Well done.

[@acortez3195]

Can high oil consumption be a symptom?

[@Darwwee]

Alex Cortez possible yes!

[@meisner6895]

Just got back from VW dealer. No other garage could find a code, so told go to dealer. They said PCV valve. So... did it and just got back.Feel sick. They charged me $700. Why? Invoice says took time to take spark plugs out. Nice check, but not necessary. right? Wish I had known what it was.

[@timbo7457]

Just did this repair on my 2014 Tiguan, bought the part from dap on Friday here the next Tuesday, watched the video one more time and done. One thing I suggest is when you have the coils out is to put something in the holes...just peace of mind so nothing falls down, I used a few clean shop rags and then used them to wipe everything down. Great Video hit all the parts of a simple repair saved me about 150 bucks in labor.

[@RoxanneTaylordg-d5s]

Lopez Mary Gonzalez Susan Brown Lisa

[@tomktm125]

I have a VW mk7 2.0 clubsport 2016 with an engine light, the trouble code is P227000 lambda probe 2 cylinder row 1 signal too lean. what do you think? A bad labda probe Or A bad PCV Valve? thanks for your response!

[@aleksandarkocovski6939]

You are amazing, great videos! A question...at approx 5:30 you are connecting a "plastic" hose that you mention to be careful with not to crack. Where does this hose go to? I found some oily area around the area where the big Air intake pipe goes . I wonder what this could do if I found some oil around that area. Thanks, you are the man!

[@trivialone11]

Dealership wanted $650 to replace this. That's $550 every 15 minutes for overhead & labor or $2200 per hour. Really Michael's Volkswagen of Bellevue.

[@TheCoatneyadkins]

Does that cause you to burn alot of oil? ?

[@2000krigar]

Can this little thing decrease oil consumption?

[@icelander1968]

Thanks! You saved me $256 in labor for a job that took me about 30 minutes max! Just test drove my Tiguan and it runs great....

[@jamesjohnson3910]

I think I've narrowed things down to the pcv. I was getting a bit of oil on the MAP sensor. The car was running hesitate on acceleration. I removed my oil cap while engine was running, no change at all to idle. That leads me to believe that it's the pcv assembly. Am I right?

[@wizbang16]

I ordered my new valve from DAP, watched your video and fixed the problem. Thank you!

[@Deutscheautoparts]

Thank you so much for the support

[@jamedoan5478]

i have p2187 but will its cause p0299 as well

[@jonsmith6496]

Save some money and just change the diaphragm. More often than not it is the problem. It’s easy to do and much cheaper.

[@bungus2012]

2:45 guy really just easily pulled out the coils with his bare hands like the Hulk, jesus

[@jasonkelley6592]

Mine pop right out... there’s a bit of suction but that’s about it

[@chastenburns]

Do you have a video of you replacing the entire valve cover gasket for this same engine?

[@aaronyork6173]

I have a 2014 Volkswagen Jetta TDI do you have a video out showing how to replace the pcv valve on the TDI? Thanks so much for your time.

[@jeepcollector91]

I'm currently getting code P2187 with the 2.0T engine in my 2010 VW EOS. Now I'm trying to diagnose the issue. So far the 2.0T is proving to be another expensive engine to maintain. Not quite as bad as the 2.8L VM-Motori diesel that "was" in my 2005 Jeep KJ (swapped in a 3.7L Gas V6 in its place) but at least all the non engine related parts are cheap on the Jeep when compared to the parts on the EOS. While the VW EOS is a pleasure to drive I don't think it will be a long term keeper.

[@DFWJon]

Got a 2010 CC with the 2.0t and the engine has a lean code and multiple misfire code. MAF reading under 1 on live data and no vacuum leaks found. Crankcase vacuum when removing oil filler cap is minimal when running. Could this be my issue? I replaced MAF sensor to no avail and with same low readings. Bout to pull hair out!!! Thanks in advance.

[@Bluegrassriver8]

Seems like he should be calling it a PCV valve housing because there is more than just a PCV. Camera angle needs to change in few spots because your arms.hands block a view.

[@ptsb5a]

2013 Tiguan. I had a P2187 along with a pile of O2 sensor and misfire codes, nine faults in total. I used my finger to plug the vent on the PCV cover bleed/vent hole to diagnose. Stupid diaphragm was torn terribly. The Doorman part is a thicker rubber bit and was super easy to swap. Thanks for the video man. Much appreciated.

[@cringemaster105]

thank you. vw tried lying to me about a bunch of bogus problems that they came out to about 18k worth in repairs and all that's wrong is a cracked pcv.

[@Korvorkian1]

You guys are fucking heroes man. Seriously this just saved me ANOTHER trip to the shop...

[@TonyAspire]

Thank you!! This sounds like my issue from the squealing noise I am getting. I unscrew my oil cap and noise goes away until I cap it back up. Ordering part now. :) will update

[@andymartinez1839]

Can I ask what type of noise was it making ? Mine is making like a crying noise … ima order the piece tomorrow and hopefully day fixes it …

[@jnairb12]

Will a bad PCV valve cause oil consumption? My son’s 2013 VW CC is burning much oil but no visible leaks. Please advise. Oil pressure light flashes on then goes off.

[@k.o.7405]

Would this fix P0507 code?

[@grey_matter8511]

Question.. I have an 11 A3 2.0. Just noticed it’s using oil and idle gets erratic when I pull the dipstick like it’s sucking air. Would this be caused by the Pcv valve not working correctly? Thanks!

[@vitolisa4676]

Ok. Thank you! I was hoping not to bring it in as to avoid costs. Again Great video. Very informative.

[@torywilsonjr9103]

Gonna try to change it myself to save some money, I'm having this loud obnoxious whistling sound coming from the pcv valve at low RPM's, and my check engine light is on so ill give a update just in case anybody is having the same problem as me.

[@samixfly]

hi there I have a 2010 VW GTI and I get engine light often it go's and come back when I checked the code I found P2187 System Too Lean at Idle: bank 1 ( I was wondering probably need replacement for PCV Valve Please advise ?

[@thisisit512]

i think its pcv valve...

[@MrUnknown747]

What was your problem?

[@angel-op7dw]

I’m having the same problem, did you ever find out what’s wrong with it ?

[@MrUnknown747]

Angelo Funez my problem was that dip stick wasn’t all the way in.

[@diegosti]

My Audi A4 2.0T b8 model failed for 1st time after 94,000miles! Friday morning at a stop light suddenly low pressure 3 bips~. So I test the oil port below the oil filter and was perfect 26psi low and higher at 3500rpm, but the pressure light only came out 1 time. Well people said ufff could be sludge. Took the oil pan and my engine looks like a brand new engine gold perfect and strainer better than the one in my kitchen! I put rtv and change oil. After 2 hours running check engine light came up 2 codes the 26 and 87 leak in the manifold. Opened the PCV valve and is bad! Ordered the new piece from Amazon and it is new again. My car does not consume oil nor problems just that one!

[@PsychoBeast017]

Damn always easier then I’m expecting Lol People think I know how to work on cars and I just do little jobs like this

[@eduardodominguez9056]

this pcv fault, can also cause a oil consuming ??

[@colinkennedy8499]

On my car the front tube goes straight to the oil separator and it doesn’t have the one on the back. But I’m pretty certain that the pcv valve has gone bad. It has a lot of mods and I’m not sure what to order

[@damianberrutti3259]

Hello, @Deutsche Auto Parts . I replaced the diaphragm and the howling noise disapear, but days later I noticed that I had a oil leak between the engine and the transmision (DSG). Could help me if This leak can cause the no-replace the all PCV valvue for a new one? * the engine sounds good Many thanks Regards

[@SPECKSPRODUCTION]

what is the latest version of this pcv valve, i saw on ebay 06H103495AK

[@larsmckay5276]

Very clear and informative clip, thanks for sharing

[@baranUtube]

My mk6 gti 2012 has an idling problem out of no where. i was going at it a bit on 2nd gear and then 3 sec later car hesitates and i hear a dif tone in the engine, and then i get home i stop to let my garage open up and my car just starts popping and idling rough.

[@albertah97]

I have a B7 audi a4 2.0t quattro, last Saturday I was driving and came to a four way. when it came to my turn to go the car completely shut off steering wheel locked up and brakes locked up. checked the battery and thats not the problem, but I notice that my pcv was crack. just wondering if that was one of the symptoms?

[@danivillan888]

i cant get those 9 bolts off for anything 😅

[@rmatt78470]

I HAVE A 2010 A5 CABRIOLET. WILL REPLACING THIS FIX MY OIL BURNING ISSUE? BURNING ABOUT A QUART PER 130 MILES OR SO?

[@nespirahh]

Hi! I have a 2008 passat CC i get a very rough idle whole car is shaking, missfire cods and system to lean fault code, could it be the pcv valve? i have already trying cleaning MAF sensor changing sparkplugs and coils.

[@stevemoss5597]

HELP. What the valve right at the back left of the rocker cover. Behind the 1 coil pack? It has a pipe that runs over the rocker to the inlet? Thanks

[@drewnashty]

How about that rear PCV hose? The clamp is different from the front one. It's seems to be shaped like a weird rounded square and me kung fu grip isn't working nor is trying to pry around the edges with a flat blade. My frustration in the heat has made me brain foggy and patience short.

[@Philwithers61]

Paul did quickly mentions it pulls straight out, no clamp or screwdriver needed. it might take a little force to pull out as mine did.

[@drewnashty]

@@Philwithers61 Yea that sounds like the quintessential, "it's easy just do this" which isn't always the case or sometimes it seems like it's never the case lol The hose broke when I gave it the man strength just pulling on it after I was pissed. It definitely has to be squeezed the right way and pulled at the same time (hehe) ... once I had the new in my hand and installed it was much easier to remove via barely squeezing it and pulling it off.

[@henryrivera8350]

2012 VW CC. Consuming a LOT of oil. Could this be the issue? Bad turbo? Bad piston ring?

[@macky4074]

Suspect this is the problem on my 2008 CC 3.6 vr6. Slight misfire at idle. Recently had to have throttle body cleaned whistle noise from engine but only when under load. Had fault codes showing vacuum leaks, Dodgy o2 sensors and cat converter fault codes. From what iv been told on this particular engine you have to replace the whole valve cover as it's a non serviceable part and comes as part of valve cover assembly. Is this correct?

[@ivinio007]

Scan Gage 2 gave me code B2AAA - I can't find what the code is calling for. I do hear a slight whistle when the car is running but no ruff idling. Should I assume my PCV went south? 2010 vw CC TSI

[@Deutscheautoparts]

+ivinio sounds like a weird code from a generic scanner. You should have it scanned with a VagCom to determine the actual codes.

[@alistairmccloy1154]

@Deutsche Auto parts My pcv has failed on my B7 A4 2.0 tfsi and I'm considering deleting it. I have seen a variety of different kits and set ups to do this, but I would like to know....what set up/kits (if any) would you guys recommend as the best way to do it? You guys seem to really know your stuff, and so any input would be greatly appreciated. Thanks 👍

[@anthonyvaladez7426]

How much does the "rear pcv valve pipe" cost? I cant find the part # anywhere. I have a 2014 vw Jetta se 1.8t gas . Can you help me with the part number .

[@chetanshinde07]

can a broken rear and front hose connected to pcv valve cause vacuum leak and rough idle with check engine light. My rear hose of PCV valve is broken into 2 parts, but when showed to mechanic he said the front hose connected to the intake manifold needs to b replaced

[@peteh5862]

I was getting codes P0507 and P0171. The PCV valve is linked to both and changing it cleared both codes. Was easy. Was missing one of the screws which will have to wait until I get to town to get another.

[@TheArsenalXI11]

@Issam Samix Belabsili: Most likely that is the top of the diagnoses list. I had the same codes on my 2009 A4 2.0T and indeed it was the PCV valve. May want to check with VW too, as these engines have proven rather troublesome.

[@xZeusAlmightyx]

Idk if anyone has ever experienced this but I just replaced my pcv and now whenever the car is warm after driving Im getting a constant squeak at idle and a louder one when shutting the car off. Sounds like it is coming from the passenger side of engine bay. Any input would be nice. Thanks

[@kretzer432]

These guys are great, was able to self diagnose and fix my car with the info on their site. Ordered this part on a Sunday had it by Wednesday. Just ordered new Coil packs and plugs from them tonight. Thanks!

[@Deutscheautoparts]

Awesome!!!! So glad we were able to help. Thank you for your business. We appreciate it very much.