Yeah man Devil-Forge rules 🤘🏻😆🤘🏻. Best Forge in the world 👍🏻
@vogman5 жыл бұрын
Definitely hot stuff ; )
@jagboy695 жыл бұрын
lmao.....
@sionsoschwalts27625 жыл бұрын
Can you help me please? I dont know where to get tongs for lifting cruciables out of the furnace. I have a couple for pouring different sizes but it is difficult getting cruciable that are full out. I dont have a welder so I can make them... I'm in Australia BTW.
@tbkustomknives89075 жыл бұрын
Sionso Schwalts check out the king of random how to build foundry tongs and they make there’s without a welder and so did I
@TheShowgunofHarlem5 жыл бұрын
BIG STACK!!! Love your vids homie... Hook me up with some of those hundos!
@overdoneone5 жыл бұрын
I can honestly say with conviction: The Devil made -me- you do it! Great post!
@randomsucks24444 жыл бұрын
Very informative. I've made plans to buy a devil forge already. I have watched most of the videos of bigstackd and learned alot.
@mamamillwright4585 жыл бұрын
So happy you have a nice new foundry! 😊 You deserve it ❤❤❤
@vogman5 жыл бұрын
Thanks Angela. For me Christmas has come early : D
@MoondyneJoe5 жыл бұрын
It seems to be the go to forge at the present bigstackD Casting even melted Cast iron in his, It is good to see a company getting credit where credit is due
@Simon673164 жыл бұрын
One day I want to be as good as you at pouring ingots! 😉
@johngalt166 Жыл бұрын
thanks for the review post - it's four years old, but I'm ready to buy a new foundry and it's good having a second opinion on products. thanks!
@vogman Жыл бұрын
Just one thought John... what will you be casting? If it's big, the Devil-Forge is fine. But if it's small, like jewellery or model engineering, a tabletop electric may be better. That's what I use these days kzbin.info/www/bejne/l5bKqXljiLCCpLs
@yertelt5570 Жыл бұрын
They appear to have listened to your suggestion for burner location but they still have the same lid handle.
@danielcrawford73155 жыл бұрын
Pretty nifty forge there. Also thought your suggestions were spot on too. Good review sirSir and blessed days ya'll wishes of bountiful seasons greetings and a very merry Christmas, Crawford out
@vogman5 жыл бұрын
Thanks Daniel. And seasons greeting to you and yours : )
@Mr-Mojo925 ай бұрын
I've been waiting to say this thank you for your review You inspired me to try it out myself sandcasting and want to go into jewelry making 👏😁👍👍👍
@vogman5 ай бұрын
That's great to hear! Keep going 😁😁😁
@greedyrumpirate66975 жыл бұрын
I bought 1 direct from Devil-Forge in Lithuania, so, we'll see how it goes. I've bought many goods from all parts of Europe and had them shipped to America. As of yet, I've never had a bad experience. Thanks for the video!
@vogman5 жыл бұрын
I'm pleased to hear it. You'll love it. Like you, I've ordered from all over the world, including your home country : ) I think companies are sensible enough to wrap well and packaging companies are brilliant by and large. Whenever I hear folks complain about postal costs, I generally say, "I'll give you that amount of money if you'll deliver it." This tends to make them appreciate what's involved a little more : D
@greedyrumpirate66975 жыл бұрын
@@vogman Just finished using Devil Forge. Ordered from their site. It arrived quickly from Lithuania to USA. Good Service, Free shipping. It was the entire kit, including the brush. Well packaged. Sheet protector for the papers. Solid/sturdy components. Heavy metal construction. Very impressed for the type of furnace. I would buy again. Thank you for your review!
@marcsenteney31605 жыл бұрын
Great suggestions. I think I would add one more though. It seems that the hinge was a little undersized for the weight of the lid. Nice job on the overview! Hope to see more of it!
@vogman5 жыл бұрын
I can put my hand on my heart and swear to you that I did make that observation in my original draft. but then I considered the difficulty of hinging on a circle. Personally I'd flatten a section of the base and lid to make a larger area for a wider, stronger hinge. But then that would raise the price. So I removed the comment as I think, pound for pound, it's good value as it is : )
@marcsenteney31605 жыл бұрын
I agree it is a great value! I just think it could be upgraded a bit. If it was to give out while using, That could create a bad situation. After all as a hobby and safety....... Safety is no accident!
@vogman5 жыл бұрын
Well the good news is Devil-Forge thanked me for my suggestions and said, very decently I thought, "We know it's not the best in the world and we are always striving to improve our products..." or words to that effect. In the meantime, as one of the comments below says, I just turn it 90 degrees : )
@marcsenteney31605 жыл бұрын
Indeed!
@4WorldPeace23 жыл бұрын
It is always nice to watch the evolutionary development of a better mouse-trap. The photos of the FB2M, on their website, reflect the gas-inlet has been relocated to the side per your friendly suggestion/comment; well done! When mine arrives, I will definitely follow your furnace heating and break-in suggestions. Thank you.
@vogman3 жыл бұрын
Enjoy! It's a good product. Mine is still going strong.
@4WorldPeace23 жыл бұрын
@@vogman FB2M finally arrived today; only took eight days to travel half way around the globe; would have arrived sooner, but it spent four days in France. Will have to wait for the rainy weather to clear before I can get started melting outdoors and casting those metals into ingots, aluminum, brass, and copper. The female FedEx delivery driver said she did a double-take and laughed when she saw the shipping origination address as she is also from Lithuania. Cool coincidence, huh?
@Handigitous5 жыл бұрын
fantastic review. Thank you. I just bought my own.
@vogman5 жыл бұрын
You won't be disappointed : D
@jackwarneckii44065 жыл бұрын
Just bought one, they moved the inlet as suggested.
@vogman5 жыл бұрын
That's great Ben : )
@ChristopherJones163 жыл бұрын
Did the move the lid handle too?
@flavacreations4 жыл бұрын
Awesome suggestions great observation. Can trip over the hose in front as well as burn your arm with lid.😀👍
@vogman4 жыл бұрын
many thanks : )
@masterplumbermark3 жыл бұрын
will this forge work on natrual gas too or just made for propane gas only??
@TheWhitde Жыл бұрын
Thanks for the review. Liked and subscribed as have run into your channel heaps this week. Ordered the 10kg forge today and now have time to clean up and look at the mountain of metal I have. In time will also get the Elegoo Mars 4 DLP as the thought of the LCD being "a consumable" totally sucks. Not so bad if replacing a 2K one etc... but the 8K ones and up start costing serious money. The 50u XY is also great compared to my Ender 3. Hoping this is something my wife can get into (making wax models/art) so I can then cast them. Greetings from Australia.
@mountaindewdude764 жыл бұрын
That looks awesome! I've looked around at many DIY foundries, including Grants and yours, and all the videos have really peaked my interest in metal melting. The Devil Forge really looks like a great possibility! I do agree with your few criticisms! Thanks for your video!!!
@vogman4 жыл бұрын
I'm pleased to say they listened to my suggestions and amended their design. It's included as standard now : )
@IcEMystPrivate4 жыл бұрын
@@vogman I thin the devil forge without the concrete is better , just the one with the insulation
@gordonturner85442 жыл бұрын
very helpful many thanks ordered one on the strength of your recommendations and its great for zinc anode manufacture cheers
@vogman2 жыл бұрын
Glad to help
@richardcranium5048 Жыл бұрын
My foundry design has worked out great for me, I cannot say they same for my refractory cement mixes I'm on my 3 rd and it's an improvement but will not stand more than 6 or 8 copper meetings. My interest in the melting is art. I have access to lots of scrap wire but in that form scrap is all it's good for, but if you can turn that wire to ingots, now you can hammer it into sheets and suddenly your options are without limit
@splintercelloo75 жыл бұрын
Absolutely fantastic review with advise for future development. Well done mate.
@vogman5 жыл бұрын
Thanks James. What I'm most pleased about was that they listened and have in part changed their design (as I explain in this video - kzbin.info/www/bejne/hpCwmHxrnJ55eJo). I think that says a lot about the company : )
@splintercelloo75 жыл бұрын
@@vogman thats amazing! I would love your advise for my situation. Honestly what donyou recommend for someone whos getting started in silver/gold ingots? I dont plan to do this long term. I might have half kilo of each metal and only want to melt my current holdings. Nothing more. What do you recommend? I've been viewing electric vs propane. Highest heat requirement will be 1100c / 2000f.
@vogman5 жыл бұрын
I've seen guys do silver with nothing more than a ladle and a blow torch. This seems a sensible approach for a one-off task. How does that sound?
@ralphmourik5 жыл бұрын
When i move to a bigger place next year i am getting one too and then there will be a lot more projects :D
@vogman5 жыл бұрын
I've always made my own Ralph, but honestly, I wish I'd known about Devil-Forge back then. I wouldn't have had such a long learning curve. It really is a nice little foundry and you're right, there's so much you can do with them : )
@ajtorricer82384 жыл бұрын
I am interested in purchasing this item...I really love this review, you answered many of my question. But just was wondering does it come with the inside pot thing for melting the metals? If not can you suggest where or what brands.. you had mentioned in your review someone could use a bigger size pot.
@vogman4 жыл бұрын
No, there's no crucible provided. You need to get these yourself. eBay is usually a good place : )
@fpc00414 жыл бұрын
just bought one! was thinking about diy you convinced me otherwise thank you
@vogman4 жыл бұрын
You won't be disappointed : )
@JulianMakes5 жыл бұрын
Great review Geoff. If my potentially rubbish burner design doesn’t work out I’ll definitely think about getting an off the shelf one like theirs, it looks awesome. I don’t know how much the foundry cost but it looks great. You made some very fair suggestions too. The lid is my main worry on my homemade one so I’ve gone with a ‘lift and spin’ type. Great vid thanks for the effort, can’t believe that burner!looks like a beast.
@vogman5 жыл бұрын
Like you I've always gone with home build, but when it comes to the burner, I think the investment is worth it. It seems to use less gas but produces hotter temperatures. I guess it's just a matter of efficiency : )
@mimked5 жыл бұрын
That particular furnace costs $599 (with free shipping) on their Ebay store. If you get the model without the refractory (and just the wool insulation), it's $390. Then there's a smaller, 4kg model (without refractory) for only $250. Prices are current as of the date I posted this comment (just barely looked them up).
@kronleather3 жыл бұрын
Hi Geoff! Great review! What do you think about replacing the ceramic wool for the burner with some high temperature rubber sealant? I think that for my first melt I didn't placed that piece of wool so good, so had some air going through there. Do be honest I even didn't follow the instructions for drying the foundry but found no cracks in the cement afterwards.
@vogman3 жыл бұрын
I'm not sure how well rubber would stand up to the heat if I'm honest... such high temp ceramic wool is fairly cheap and worth using to get the air content just right 😁
@thomashill34575 жыл бұрын
How many times can you fire up the furnace of one propane bottle. Does it come with the crucible or do you have to buy your own separately. And have you made any exotic metal mixes like 90/10
@vogman5 жыл бұрын
Hi Thomas. It's impossible to say with the gas as there are so many factors (size of the bottle, type of metal, quantity being melted, etc). It doesn't come with a crucible - you need your own. As for metals, nothing exotic really... I worked with aluminium, brass, copper and aluminium-bronze (90% copper, 10% aluminium) : )
@lindsay5985 Жыл бұрын
Hey great video! Can this be used for glass work? I see it has a max temp of 1600 deg C. Looking online, the exact melting point of glass seems to be anywhere form 1500C to 1800C depending on the glass... I'm new to this, but the furnace I used at a local glass studio had a readout of 1500 deg C on the controller, however I'm not sure how accurate this was.
@conorharford51173 жыл бұрын
Hi VOG i just ordered a FB2MB. Never thought about the handle. Ill have to get some longer gloves
@softailfun5 жыл бұрын
Nice review mate. I was going to mention the hinge but I see that it has already been raised and answered. I agree with you about the hinge buddy, a flat surface maybe welded onto the outside for a better hinge might be the order of the day. Keep on keeping on fella.
@vogman5 жыл бұрын
Thanks Softail. Hadn't heard from you for a while : )
@tariqmahmoodofficial98884 жыл бұрын
Very well Nice melting alominium
@ramonajaramillo59754 жыл бұрын
Oh this definitely on my Christmas whis list..
@vogman4 жыл бұрын
Good choice : )
@ArtByAdrock5 жыл бұрын
Nice review Geoff! 👍🏻 makes me wish I had one. I’ll just paint artbyadrock on the top of mine 😂 too bad that crucible of yours is a goner. I’ve gone through many so I know the feeling. Good work bro 👍🏻🍺
@vogman5 жыл бұрын
Thanks mate. It's a nice little foundry, with or without the name plate : )
@ArtByAdrock5 жыл бұрын
VegOilGuy looks like it 👍🏻 would it hold my massive 12kg crucible or is that way to big haha 😂
@vogman5 жыл бұрын
Wow, that is big... and no... 10 max for this foundry. I'm too much of a wimp to lift that much brass : )
@MetaView74 жыл бұрын
Good points on the suggestions.
@vogman4 жыл бұрын
Glad you think so!
@TheKillHaa Жыл бұрын
Place a grill on top and cook a nice soup while waiting the melt process. Good video, thanks
@arthurtorricer45444 жыл бұрын
its been awhile since you made this video.. has the company taken your suggestions and improved their product, with left or right side handle and the burner location?
@vogman4 жыл бұрын
Hi Arthur, yes they did - kzbin.info/www/bejne/hpCwmHxrnJ55eJo 😁
@arthurtorricer45444 жыл бұрын
nice thanks. guess yall still need to lose your arm hairs when you open the cover..lol they didn't move the handle.. I'm looking for 1 that I can just fire up and start.. no painting of the inside coating.. ill do the pre heating steps. Wonder how long it will take to ship to Hawaii on the Bigisland?
@tebogomalumane58482 жыл бұрын
This is great, I'd really like to have one and start my melting project
@vogman2 жыл бұрын
It's a great hobby as long as you're VERY careful with safety, as mistakes with molten metal are hard to recover from. If big stuff is your goal, a foundry like this is great. If smaller stuff, like jewellery, is more your thing, consider electric kzbin.info/www/bejne/l5bKqXljiLCCpLs
@briannguyen22845 жыл бұрын
I have one of these (purchased it straight away because of this video) and to anyone else with one of these, has anyone else got some cracks formed at the lid vent? I properly burned the residual moisture out as per the instructions when I got it, and ive used it about 8 times, only melting aluminium, and already I've got a 3mm crack in the cement around the lid's vent openening. It burns fine still but i worry about this crack worsening. I have a belief it's because of the shock from inside the forge once the propane ignites and fed air (the moment it goes "woof").
@vogman5 жыл бұрын
Hi Brian. Don't be too worried about cracks. I don't think there's a furnace out there without them. Mine cracked on first use but is still going strong. You're right about the shock on the insides. Everything wants to expand when exposed to heat and look at the incredible heat these things are subjected to. Mine glows red! So from cool to red hot in just a few minutes... that's a massive temperature variation that the majority of materials couldn't take. Even refractory has troubles. Fire bricks crack and break up. Electric kiln linings wear away. As long as it holds together and does its job, I wouldn't worry. If pieces fall off or it cannot retain the heat, that's a different matter - contact Devil Forge right away and light me know if you have any issues. They're a good bunch and keen to help, so I'd be surprised, but the offer stands. And do check out my videos shortly after this one. Look closely and you will see cracks in mine. Cracks, my friend, are inevitable : )
@awldune5 жыл бұрын
Free stuff at only 12k subs, nice pull! You really need some better ingot molds! Great job illustrating your suggestions. You achieving a very high standard with your videos.
@vogman5 жыл бұрын
Thanks mate. In truth, I never much bother with ingots (BigstackD would faint at that suggestion). I picked up the "mini-muffin baking tray" tip from King Of Random and it's great for small crucibles, but I left small crucibles behind a long time ago. I only use these trays to dump out any leftovers when I pour and they're okay for that, but I did think how grubby they looked in this demo.
@gindyman1 Жыл бұрын
I know this was 4 years ago but wouldn't turning the furnace 90 degrees to your right and treating the side as the front take care of both of your suggestions?
@ricksmith82145 жыл бұрын
Thanks for the video! How long does the foundry usually go on a propane tank (in hours or number of crucibles filled with aluminum or steel)?
@vogman5 жыл бұрын
Hi Rick. It's a good question but one that can't easily be answered. How big are the gas canisters? What temperature? What metal? How clean was the metal? What's the outdoor temperature? There's so many variables and I really don't have an answer. I can say that the gas burner from Devil-Forge is quicker than the home made burner I was previously using and it certainly seems to use less gas. This is probably aided by the foundry being more efficiently insulated. As for crucibles, that's anyone's guess. I have crucibles that have lasted months and some that have cracked on first use... and yet I treat them all the same. Sorry if this answer wasn't all that precise : )
@manuelmendonca84824 жыл бұрын
@@vogman Don't use ordinary propane or LPG tanks, fill your gas tank at the service station, the gas they use in cars burns harder and hotter. how simple make an adaptor get the filler valve from an old car at the wreckers and adapt a pole connector to it, you dont even have to bleed it as the pump forces it in and stops automatically.
@manuelmendonca84824 жыл бұрын
@@vogman you can not use 9kg bbq gas bottles the freeze up and you don.t get the gas supply you need , minimum size gas bottle to work well is an 18kg bottle because it has a greater surface area to convert the liquid gas to gas vapour.
@nikond90ful14 жыл бұрын
Thanks for the video.
@brendoncleaves1635 Жыл бұрын
Can you melt steel with any of the devil forge products?
@lyulf05 жыл бұрын
Thanks for the review.
@vogman5 жыл бұрын
Thanks : )
@johnrutzen18615 жыл бұрын
Very interesting. I'm thinking of getting one. I have cast iron before using waste oil but it's very dirty process so I was thinking of this to do bronze castings. Please could you tell me how much gas it used to do the bronze melt?
@vogman5 жыл бұрын
No worries John. Head over to my mate BigstackD. He's done a few videos weighing his gas canisters before and after use, helping him calculate this very information. I'm sure you'll find what you need there : )
@donniebrown28965 жыл бұрын
I think what devil forge is doing is fantastic. Gifting with your name on it??? You know your work is being appreciated. You, big stack, and oil burner are my favorites. Not only do you have the casting I like but the narrative that goes along with it has me cracking up. Really do wish if you had the way, to contact oil burner and let him know how much he's missed. Know he's still watching cause I've seen where he has commented. By the way, did you post a vid on building your furnace that raises on the wooden rails?
@vogman5 жыл бұрын
I know what you mean Donnie. Every time I do something daft, I think about Oil Burner's commentary on Health & Safety. It cracks me up every time. I've shared two foundry builds I think... there's a refractory one, much like this one but not as good if I'm honest, and my electric foundry (which rises in the air on wooden rails). Here's links if you're interested. Refractory foundry : kzbin.info/www/bejne/pGWVpWaDZsuCr7s Electric foundry : kzbin.info/www/bejne/jqrTnnxpba5-d9k Thanks for the input : )
@genericuser81573 жыл бұрын
What size bottle you use mate and how long does it last roughly
@pirreli53 жыл бұрын
place the bottle to the left instead of stepping over the hose, good vid i buying one!
@diegopnd83 жыл бұрын
Is LPG (liquefied petroleum gas) the same as propane? Can LPG be used with a Devil Forge Foundry?
@stephengefell73174 жыл бұрын
I think you got the cracking because it was set to high. Yes, the instructions say 0.5 atm, but it also offers the conversion to megapascals (0.05 MPa). Your regulator appears to measure MPa so it was 10x the recommended setting.
@stephengefell73174 жыл бұрын
Just my two cents. I'm just some dumb bloke and am very likely wrong.
@vogman4 жыл бұрын
Your doubtless right. I've never claimed to be clever : )
@trivialbalance46274 жыл бұрын
@@vogman I got my FB2M today, and i was taking a look of this video again to see how to get rid of moisture properly. I noticed that they have changed the conversion to said 0.05MPa now in the manual, unlike in this video it is different. So yes it is definitely way too high in this video.
@bangmasse3644 Жыл бұрын
@@vogmancan we melt brass witj this?
@MatthewsFabrication Жыл бұрын
Will it actually melt steel? Up to 2,300F to 2,700F ?
@SuperGokuSon3 жыл бұрын
I am very excited to say my DFPROF2+1D GAS PROPANE FORGE is in the FedEx truck but live in Texas and waiting is the worst. and these seem to be the best prices and reputable Lil forges to get.
@monjier2 жыл бұрын
Hey VOG. I've come to your videos for help and reviews on almost every major jewellery related purchase and once again, I need your help 😂 do you have any recommendations for burn out ovens? Preferably something that won't break my bank account 😂
@MarkATrombley5 жыл бұрын
If you use wire to attach a metal bar to the lid handle you can stand at the side of the foundry and open the lid without burning your arm.
@vogman5 жыл бұрын
Good thinking Mark : )
@ronyerke92505 жыл бұрын
@@vogman Do you weld? A pair of U-bolts might do the job too. That handle looks substantial enough to drill a pair of holes into so you could just bolt on an extension to either ( or both ) side(s). I'll be watching to see what you come up with.
@vogman5 жыл бұрын
You're right Ron. Those handles are tough enough to take even my terrible welding : )
@williamchellis48055 жыл бұрын
@VegOilGuy, did you hear back from the folks at Devil Forge on the suggestions you made? Would love to know if they plan on incorporating any of them in futures production builds.
@vogman5 жыл бұрын
Hi William. They were very receptive to my comments and thanked me for them. They said that they are always striving to make improvements. Who knows, maybe we'll see these improvements in a later model. But in the meantime, for the money, it's hard to beat these little forges.
@Karateka955 жыл бұрын
Casting's not really my thing but I am looking to get into forging (knife making). Would you have any hesitation giving one of their single burner forges a go? Do you have any experience of them?
@vogman5 жыл бұрын
I've not heard anything negative about Devil Forge. Sure, I've heard of a few problems, but there's problems at times with all suppliers. The important thing is that these problems were all resolved - that speaks highly of them to me : )
@MrTangoman555 жыл бұрын
Hi VegOilGuy...I noticed in your review you talk about a side handle to lift the lid. If you remember the old Morgan type crucible furnaces, they had a slide along lid which puts the lid safely out of your way. Obviously they would need to incorporate a bracket to slide it on to though. I see what you mean about the burner position too. How come most of the Devil forge furnaces have that light wool lining but the one you tested has a more solid one? Is that an updated type? Cheers mate.
@vogman5 жыл бұрын
Hi Kevin. Thanks for the input re the lid : ) Why are most just wool? Cost is the simple answer... they're cheaper this way. And if you're prepared to invest in QUALITY respirator equipment, that's fine, but ceramic wool does give off hazardous fibres that are very harmful (Devil Forge are very honest about this and make the same recommendation in their literature). The model I have also has ceramic wool as an insulator but this is coated with refractory cement, trapping the particles and preventing this hazard. Unfortunately this added extra increases the weight dramatically and also the cost. But personally I feel you can't put too high a price on health : ) Hope this makes sense.
@MrTangoman555 жыл бұрын
+VegOilGuy ...that makes sense as if I ever got one that would of worried me. I was a Moulder many moons ago and have just been eying up the equipment available if I was to start a little hobby foundry.
@vogman5 жыл бұрын
As a hobby you'll find it very rewarding, and being a moulder you'll already have a major advantage on most folks. Good mould design is critical to successful casting : )
@SomethingFromTheShed5 жыл бұрын
Hey Geoff. Iv orderd my devil forge yaaay. Question time. 1. How long (in mins) Does it take to heat up and melt copper ? 2. How many melts can you get from your propane bottle ? 3. How much metal can u fit in your crucible ? let me know buddy as i want to use it to make money and have fun with
@vogman5 жыл бұрын
Brilliant news, but mate, I don't think you've asked one question that I can answer. It all "depends". How much heat are you applying, how much copper is there, how big is your gas bottle / crucible. Too many variables mate... But I tell you this, you'll have great fun discovering the answers yourself : D
@SomethingFromTheShed5 жыл бұрын
@@vogman oh man i cant wait.the omly problem is. is im not using it until im all set up. tonges. crucible. molds. glovs. etc etc so it will probs be sat in my workshop till next year but i mite sneak it out and do a opening box video and the drying out process. oh man i cant waiy
@zachofalltrades11114 жыл бұрын
What size crucible do you normally use ?
@samiam75 жыл бұрын
I been waiting to buy me one of these. Nice review
@vogman5 жыл бұрын
Well Sam, I can say you won't be disappointed. Are there better out there? Maybe, I really don't know. But I can tell you it beats anything I've used before, it seems pretty good value to me and the burners are amazing. If you get one, you'll be a happy chappy : )
@samiam75 жыл бұрын
VegOilGuy now we need a review on equipment; lifting and pouring tongs etc
@vogman5 жыл бұрын
Unfortunately no one has given me any of those ; D I did make my own though. It's not too difficult.
@markgibbens4373 жыл бұрын
Do you think it could be turned on its side for a make shift forge occasionally
@vogman3 жыл бұрын
I haven't tried, but possibly 😁
@GKR3DCAD4 жыл бұрын
I love this video thanks
@vogman4 жыл бұрын
Glad you liked it : )
@NormReitzel2 жыл бұрын
Have you used it emough to get graphite crucible burn-through?
@vogman2 жыл бұрын
I've used it dozens of times, but I'm always careful with the crucibles. Once they thin or show signs of cracking, don't take the risk. It's not worth it 😁
@SoBeit777 Жыл бұрын
How to avoid the initial "explosion" when lighting the foundry? seems a little sketchy 😅
@vogman Жыл бұрын
No... that's the fun part 😁
@novaforge58324 жыл бұрын
Also I’ve followed the instructions but there is still some moisture evaporating how many times did you use yours until it is completely dried?
@vogman4 жыл бұрын
Don't be in a rush... go nice and slow... it takes as long as it takes : )
@novaforge58324 жыл бұрын
@@vogman Thank You!
@laserfalcon5 жыл бұрын
Nice review
@ronyerke92505 жыл бұрын
An automotive jack stand is a less flammable alternative to the wooden shed for leaning the lid over. I'm a little worried about your lungs with that ceramic wool exposed at the burner. Also, just turn the furnace 90 degrees anticlockwise.
@vogman5 жыл бұрын
No ceramic wool problems with this foundry thanks to the refractory cement. BigstackD has the ceramic-wool-only model and Devil-Forge DO recommend with that one that you wear proper respiratory gear. But then again good safety wear is always sensible. Yes the lid tilts over about 180, whereas I would prefer may 100 degrees, but that just person choice, which is why I leaned it against my shed. Interestingly, despite topping 1000C, you'll notice no scorch marks on my shed at all. Impressive I thought.
@robertlagasse42815 жыл бұрын
I just got my devil forge FB2M and the curing process is what worries me. I know low heat, don't exceed 0.05MPA, what is ur recommended pressure for the furnace?
@vogman5 жыл бұрын
Hi Robert. In honesty, keeping it simple, go as low as you can go. Don't worry about gas - worry about your new purchase. Set the pressure gauge right down and heat for 15 minutes or so - you should see evaporation taking place. Then let it cool and repeat. Take several bashes at this until you're confident the moisture has gone. I did develop cracks and I followed the guidelines exactly, BUT those cracks have not worsened, so take comfort in that. However, given the opportunity to do things again, I would go sloooooooooooowwwwww. It's not a race : )
@robertlagasse42815 жыл бұрын
@@vogman thanks for the advice. And yes, I definitely plan to take it very slowly.
@bkihdhd39375 жыл бұрын
Can it Melt Cast Iron? Is it worth buying devil Forge or building it yourself.
@vogman5 жыл бұрын
Hi. Yes this furnace can cope with Iron and Devil-Forge make a burner specifically for high temperatures like that. As for buy or build, that's down to you. Personally I'm the kind of guy that likes to make things. Some are, some aren't. I will say it would probably cost me nearly as much to build one of these as buy it as the quality seems pretty good to me, but you may have access to materials I don't etc. However, for best results, I would recommend getting a burner : )
@bkihdhd39375 жыл бұрын
@@vogman which Burner is that. Do you need the forced Air one?
@vogman5 жыл бұрын
Yes... you need the extra air : )
@sixroldan67424 жыл бұрын
How long are these furnaces supposed to last with moderate use?
@vogman4 жыл бұрын
Several years I would hope : )
@thisisengland16015 жыл бұрын
I'd love one of these
@vogman5 жыл бұрын
I've been very lucky here Dan, I've been given one. But they're well worth the investment : )
@thisisengland16015 жыл бұрын
@@vogman yes well worth at the moment I'm trying to make a DIY furnace with a bucket and plaster and sand a blow torch
@vogman5 жыл бұрын
Dan that is THE place to start mate. Most of us begin there. You'll soon find out whether the hobby grabs you or not. Just don't expect too much from it. Plaster foundries usually fall apart after 1 or 2 uses. But it wets your apetitie. King of Random suggested suspending wire wool in the wet plaster and said that can increase the life tenfold. I've never tried it, but it's cheap enough and worth a go : ) If you're in the UK (I'm guess from timeline here) don't go with Plaster of Paris as that's expensive in large quantities. But a bag of Bonding (used by plasterers) is cheap and large. Works very well but takes longer to dry - which can be a good thing.
@thisisengland16015 жыл бұрын
@@vogman yes mate from the UK and happen to have a big bag of Paris knocking about I'm abit obsessed with Viking and bronze age stuff and read lot regards of bronze casting which I find amazing but wish I could get the idea of lost wax casting as IV told my Mrs I'd cast her a ring one day lol
@vogman5 жыл бұрын
Smart move that man! There's half your battle won : ) I love bronze age as well and resisted as hard as I could using a vacuum because they're expensive and were NOT used in the bronze age. But those clever sods managed would I couldn't, so I found my cheap pump and chamber alternative that works great. Talking of jewellery, you will know exactly what I mean when I say I'm planning on making a Thor's Hammer pendant soon.
@joerails15115 жыл бұрын
I keep finding online sources calling plaster of paris "investment plaster." What kind of investment plaster do you use?
@vogman5 жыл бұрын
Hi Joe. Yeah, I found that. It's so damn annoying. I found it cheaper to buy in bulk and got this... www.hswalsh.com/product/pioneer-smoothcast-investment-powder-tc0451 or you can get smaller bags, more expensively here www.artisanfoundry.co.uk/product_info.php?products_id=297 And despite appearances, these are both the same as they're made by a company called SRS I believe : )
@joerails15115 жыл бұрын
@@vogman Thank you.
@madlankan67354 жыл бұрын
Have you any video about heat treating Aluminium
@vogman4 жыл бұрын
No, I don't use Aluminium much in honesty : )
@emiliogreenwood81905 жыл бұрын
My big question how much does it cost in American dollars anyway
@vogman5 жыл бұрын
I don't know Emilio, but a quick look at their website might help you. Try this www.devil-forge.com
@sionsoschwalts27625 жыл бұрын
Get them off Ebay, same price. Also on their website you need a Lithuanian Citizen ID number to complete the checkout.
@vogman5 жыл бұрын
Thanks for letting us know. eBay is the best bet then : )
@emiliogreenwood81905 жыл бұрын
Why would you need Lithuanian citizen ID card
@vogman5 жыл бұрын
Hi Emilio. I'm only guessing, but it's probably a local thing. Devil-Forge are in Lithuania and probably set up originally selling to their fellow countrymen - hence the ID business. But as they've grown they've developed an international market and like many, they use eBay to deal with issues like currency and card payments. If you were buying my friend, use eBay. I believe there's a like on their homepage. From there everything will probably be familiar to you : )
@richhunt73035 жыл бұрын
Just getting started into melting... I’m a welder in the states... is it possible for me to make my own molds? They won’t be cast... but I have access to lots of steel stock....
@vogman5 жыл бұрын
Hi Rich. Yes lots of folks with talent in welding make ingot molds, etc : )
@richhunt73034 жыл бұрын
VOG awesome... love the videos... keep them coming!
@sidewind1312585 жыл бұрын
Hope you get more donations for a new crucible. Do you plan on going up in temp ? If you do, how about trying cast iron, the only reason I haven't bought one yet, I need a foundry that can do cast iron
@vogman5 жыл бұрын
Two comments in a row about cast iron, what are the odds : ) Yes apparently this foundry can handle cast iron and I will be testing that claim in a few weeks, as soon as I can scrape together enough to two new crucibles. One will be completely sacrificial... my GUESS is that the process will eat the budget end crucible, making it a one shot deal. To handle those sort of temperatures regularly, which I don't need to but you may, look to the crucibles than are around 10 times the cost. There's a reason they're so expensive : O
@danielcrawford73155 жыл бұрын
@@vogman in your opinion...what would be the best crucible for cast iron? And what size would you suggest for a large project requiring around 100lbs /45,5 kilos. Will be pouring a simple large block with 4 foot type extensions
@vogman5 жыл бұрын
I'm sorry Daniel, I've no experience of anything that size and I've never used cast iron. It would be unfair of me to offer opinions on something I have no knowledge of...
@manuelmendonca84824 жыл бұрын
I built mine in a beer keg and it is a 100% better than that devil forge, not impressed. Next time you pour the alloy put your ingot moulds in a tray of sand to catch run away metal also a lot safer.
@davidscott57464 жыл бұрын
Is your lid loose, I just got my 10 kg furnace and my li seems really flimsy.
@vogman4 жыл бұрын
Hi David. It does seem a flimsy hinge I admit. Because it's circular, there's not much room to fit a straight edge, which a hinge needs to be. But even though it wobbles a bit, mine is still as good as day one. I hope this helps : )
@davidscott57464 жыл бұрын
Thank you for your quick response and yes it does shed some light. Melt on and stay safe.
@josephpursiful49604 жыл бұрын
I'm looking to build my own foundry any tips or suggestions will be appreciated
@vogman4 жыл бұрын
Hi Joseph. I've made my own as well. Here's the video - kzbin.info/www/bejne/pGWVpWaDZsuCr7s
@qivarebil21494 жыл бұрын
Go electric, and forget all the mess and noise from burning fossile fuels and oils.
@novaforge58324 жыл бұрын
Is it normal for the refractory cement to crack a little?
@vogman4 жыл бұрын
Yes, a little cracking is common. It's happened to mine. The heat fluctuations experienced in these furnaces is incredible so you can forgive a little expansion. As long as it remains structurally sounds, fine cracks shouldn't be a problem for you.
@novaforge58324 жыл бұрын
@@vogman Thank You So Much! I was Really Worried.
@jasonshaw80943 жыл бұрын
if it's used on a lower pressure, what life expectancy am i looking at here?
@vogman3 жыл бұрын
Hard to say... mine is pretty abused but still going strong 😁
@jasonshaw80943 жыл бұрын
@@vogman thank you
@Del350K45 жыл бұрын
It´s nice to have a dream...I´ve just got a new one. I´ve been daydreaming about building a burner for some time. When I tried a friend´s burner in my charcoal furnace it just popped and banged like a KZbin pulse jet so I´ve been daydreaming about building one myself, till I saw this video. Now I want a Devil Forge FB2M and a Devil Forge burner. Just one thing - I´m a tad disappointed to see this illustrious channel referring to a furnace as a foundry. Just as my teeth grate when I hear Richard Hammond talking about some powerplant having been "forged in the crucible of motorsport", I shudder whenever this misnomer is repeated. My internet research suggests that a great deal of the responsibility for this outrage rests with none other than HRH The King of Random himself, with his (otherwise) superb "Mini Metal Foundry" video. The furnace melts the metal - the foundry is the workspace in which the furnace is sited, but I suspect that I´m on a losing wicket here, given how many people say "My grandad had a Robin Reliant" - how did that one come about? No-one says "My grandad flew a Spitfire Supermarine"...(fade out to incomprehensible discontented muttering)
@vogman5 жыл бұрын
Del, I thought you'd left me... I was fighting back bitter tears and everything. Glad to have you back : ) Please let's not row over semantics. This is the internet where accuracy takes second place to entertainment, after all. I think you're right about KoR, but he's shaped so many of us, myself included, with this terminology. And if that's what people want the hear, then I'll repeat it, else suffer no views at all (again). Plus we speak English, that ever-evolving language that constantly reshapes itself in an never ending impetuous attempt to confuse other languages. As for Devil-Forge (I know, 'Forge' ), they make and mean little furnace / foundry / metal-melting-bundle-of-joy. And if you don't want to spring for everything, if you wanted to hold back a penny or too for a celebratory glass or ten of something afterwards, I would strongly encourage you to look favourably upon their burners (torch?). I made my own previously and I thought it worked... but now I compare it with the Devil-Forge burner, I realise mine was a limp, pale and weak imitation. I must take this opportunity to say that I have missed my Del-ism's. It's been a few wax melts now. Good to have your input again : D
@Del350K45 жыл бұрын
@@vogman Oh, no, I haven´t gone anywhere. I may not comment but I watch your every post. You´re right to say that English evolves constantly - I suppose I´ll have to grin and bear it (I´m not giving an inch on the "Robin Reliant" business though). I know I can make a furnace body, so I shall take your advice and focus first upon acquiring the Devil Forge burner. I still have a huge ball of hand-stripped copper wire and a couple of !lb ingots of tin, after all, and plenty of daydreams about what to do with them...
@vogman5 жыл бұрын
Yes... that much copper is the stuff of dreams : ) Have you seen my home made foundry videos? A man of your obvious talents would have no trouble putting something even better together. Ceramic wool is fairly cheap in small quantities and does work very well, but please cover it with something to avoid those nasty particles. But the burner... oh yes... you'll thank me for the burner.
@Del350K45 жыл бұрын
@@vogman It´s when I´ve been watching your build videos that the daydream bubbles back to the surface, usually when I´m at work, or out doing the weekly shop, or watching Netflix with my wife, or gazing fondly at the little pile of ally cupcake ingots stacked discreetly beneath the wardrobe.
@vogman5 жыл бұрын
As you've seen, I have to be careful me my daydreams... they're capable of combining Angelina Jolie and casting. Such daydreams need watching carefully... ideally from behind the safety of a restraining order ; )
@mareksvrcina52795 жыл бұрын
Try to melt steel or cast-iron in it. I have already seen someone doing it, but i still can’t understand the fact that this propane burner is able to reach such a high temperature.
@vogman5 жыл бұрын
Stay tuned Marek. I will be doing that VERY soon and hopefully providing suitable explanations of the process : )
@Markerface2 жыл бұрын
I know it’s old but they all say you respond too even old comments 😋 but I’m thinking about buying the 20 kg forge from them it’s almost 900 us$ please let me know!!!
@vogman2 жыл бұрын
There's nothing wrong with Devil Forge. But it does depend on the type of casting you want to do. If it's big items and you like working outdoors, then this is the way to go. If you want to do small items, like jewellery, then consider an electric furnace like this kzbin.info/www/bejne/l5bKqXljiLCCpLs which is small, quiet and indoors 😁
@OldIronShops5 жыл бұрын
nice looking foundry i need to go check them out but just fyi accepting gear constitutes payment .
@vogman5 жыл бұрын
True mate, but what I mean is that I'm NOT being paid to say nice things. I made it perfectly clear the Devil_forge that I wouldn't lie and if I didn't like it, I would say so. They took that gamble... and it paid off for them. It's good. Could it be better? Yes, but then it could also be more expensive. So all things being equal, it's good for the money in my eyes : )
@OldIronShops5 жыл бұрын
no worries my friend just wanted to let you know for legal reasons if you haven't mentioned it it could get you in trouble. to many lawyers in the world lol
@steven22125 жыл бұрын
Fantastic kit...suppose you could cook a pork roast too.
@vogman5 жыл бұрын
Now that's a good idea ; )
@joshmelohusky83475 жыл бұрын
Do they make larger foundry’s to fit a16 crucibles
@vogman5 жыл бұрын
Hi Josh, I have seen a much larger professional quality foundry on their website, but I don't have any details. Have a look at www.devil-forge.com and see if there's anything suitable. You can always drop them a line, they're very helpful : )
@joshmelohusky83475 жыл бұрын
Ok thank you very much
@vogman5 жыл бұрын
No problem. Happy to help : )
@samsonporter8034 жыл бұрын
Does anyone know exactly how hot these are able to get? I’ve been trying to cast aluminum bronze knives and other similar things with my own diy foundry, and even though it melts fine, it doesn’t quite get up to proper temp for thin sections (~2200F), and I was hoping I’d be able to buy a better foundry
@vogman4 жыл бұрын
You'll certainly have no problem with Aluminium Bronze in a DF, but make sure you're burner isn't the issue first, or maybe even consider better insulating your foundry. And, of course, there's the matter of your sprues : )
@manuelmendonca84824 жыл бұрын
@@vogman Use a bigger gas bottle to get more gas volume coming into the forge, Use car gas, fill your bottles at the service station like I do the car gas burns harder and HOTTER trust me. how do you fill your bottle at the petrol station well first make an adaptor from the car filler valve to your bottle valve then to fill it up well up to you how you do it , clue - late at night when the servo is not busy.
@ytnjw5 жыл бұрын
You say 1600C, the Devil Forge website says 1450C. Which is right?
@vogman5 жыл бұрын
Hi Nick, I'm going to say "yes" for now as I got that figure directly from them, but I'll double-check with Devil-Forge and come back to you with confirmation.
@vogman5 жыл бұрын
Hi again Nick. I've just heard back from Devil-Forge. Both answers are correct. 1450C is the max temperature achievable on the "package" displayed (foundry + burner). But with the forced air burner instead, the foundry can be raised to 1600C. So the foundry CAN handle 1600C : ) Hope that makes sense.
@mevk15 жыл бұрын
compensation - sold out?
@vogman5 жыл бұрын
Devil-Forge have sold out? I'd be surprised. They're always making them I believe...
@stanhill39808 ай бұрын
No address so I can get one ????
@Mrsgabrysol5 жыл бұрын
Does it include the liquid holder and the thongs?
@vogman5 жыл бұрын
Hi Adrian. Unfortunately no. You'll need to buy your own crucible (cheaply enough on eBay) and tongs are something you can either make yourself or buy from a suitable store.
@Mrsgabrysol5 жыл бұрын
@@vogman can you use any furnace tongs or does it have to be Your thongs type and what the biggest crucible you can use for this furnace?
@vogman5 жыл бұрын
Any tongs you feel comfortable with my friend. And from memory, I think it's a max of 10kg crucible... I'm sure I mention it in the video if you want to double check : )
@CrucesNomad15 жыл бұрын
Can you build this at home cheaper? Materials wise, not labor or tools.
@vogman5 жыл бұрын
Hi John. THAT is the real question. I've built a few myself and I'm still not overly confident in my answer. IF you had all the necessary skills and equipment (particularly welding I think) and if you had access to a free and robust metal container (to make the comparison fair), then it would just be a matter of good ceramic insulation, good refractory and time. So yes, in those circumstances you could certainly do it cheaper. If you didn't have a good container and had to buy one, plus insulation and refractory, you could still do it I would think. I'm the sort of guy who prefers to home build rather than buy, but I frequently find these builds cost me more than I would expect and often cost more buying one. As the old DIYer joke goes, why buy one for £20 when you you can build your own for just £100? However, I'm generally satisfied that my home builds include superior materials, are built specifically to my needs and, for the most part, are better than the off-the-shelf choice. In this case I'm not so sure I could match everything... it's a nice little foundry : )
@CrucesNomad15 жыл бұрын
@@vogman I have the time, just dont want to burn the place down or get hurt. Really enjoy your vids. Cant wait to see what you do next.
@vogman5 жыл бұрын
If you're careful mate, you'll do fine. Just don't take risks and if you want a gas burner, buy one. You'll thank me in the end - especially if you get the Devil-Forge burner - it's a powerful little beast : )
@CrucesNomad15 жыл бұрын
@@vogman I actually started a build after your video. I do agree buy a burner(s). I have a back ground in metal working, machine shop, precision forged parts, and heat treat. But I learn so much watching you guys who have taken the next step. I have many hats. But your ideas rock.
@vogman5 жыл бұрын
In that case John, I bow to your expertise. I am but a humble Tryer. I have a go because I enjoy it and admire the skills of those that do it well. By the sound of things, you have more than enough expertise and could no doubt build your own burner from scratch (I tried and failed... too much precision needed for my hamfisted attempts). I also admire you for looking around. I NEVER assume I have all the answers. We all benefit from the examples set by others. : )
@anthonyatkinson31654 жыл бұрын
Hi can u tell me what the cost was
@vogman4 жыл бұрын
Sorry Anthony I don't remember... these excellent forge's are available from Devil-Forge : )
@dairave4 жыл бұрын
lets face it, where the hell do manage to find the side of the circle
@milinddevrukhkar91223 жыл бұрын
1kg price
@samsmith26352 жыл бұрын
I didnt see any steel melted, everyone advertises steel can be melted but you never see anyone melt steel, just cast iron, two different melting points.
@vogman2 жыл бұрын
I've never said that I don't think. Steel melts around 1500C which is crazy hot. 😁
@tonyheaney78044 жыл бұрын
Why do you call a furnace a foundry ? A foundry is building where casting are produced
@vogman4 жыл бұрын
I don't, Tony, but others widely do. I believe it's a phrase coined by the late and great Grant Thompson (KoR) who created 'The Mini Metal Foundry.' It was such an amazing success that the word became associated with the item, and as the English language is fluidic in nature, we adapt and adopt 😊 Look at words like cool, bad, pretty, awful, etc. The words essentially mean what we want them to 😁